Why my A30-S203 fans work all the time?

Similar Questions

• e7240 CONSTANT NOISE OF FAN NOISY / FAN RUNNING ALL THE TIME

  We received 2 nine E7240s directly from Dell, one for me and one for my colleague. As soon as I turned it on to build for my colleague, I noticed that the machine was overheating and the fan made a noise. Dell offers an upgrade of the BIOS that has not changed anything. They then changed the radiator, even once, that does not change and since then, they have changed the motherboard. My colleague went on vacation, so I don't know if the problem has been resolved, however, my laptop day you do not overheat (also of course as it has done for my colleague) BUT THE FAN RUNS ALL THE TIME. So much so that I think that the person in the room upstairs is using his hairdryer. Dell has replaced the heatsink of heat and the motherboard yesterday, I did the same update of the BIOS and the problem is even worse. As soon as I turn the thing, the fan runs all the time making a big noise. My predecessor was the E6500 and I was not bothered by noises, he did.

  The 7240 made so much noise that I want to throw it out the window , seriously, I go back to my old 5 years e6500, which is now very slow, I can not just take constant hair dryer of the fan noise! I'm waiting for Dell back to me, but I don't see what else they can do.

  I suspect a problem of design with newer models, someone with a laptop computer Latitude 13 also mentioned it on the Forum, someone else with an e7240 also said "I noticed the fan turns most of the time - it's quiet, but you don't know is spinning."  I just implemented, so the CPU is busy enough. "A person with the e6320 says"and the fan is noisy and turns far too often.

  I just bought a new Dell Latitude E7240 with Windows 7 laptop and had the same problem with overheating and the fan is running loudly all the time. I just fixed it on my laptop, it may not work for everyone but just in case I walked it here.

  The index for me was that the question has happened at home, not at work.

  • Using the Task Manager, I found that a "svchost.exe" process was always running at 25% of the CPU, i.e. to take 100% of one of the 4 hearts. For this you need view all processes, and that's why you need a local administrator account if she asks permission.
  • With right click on this process-online 'Go to services', you can study what services are hosted by this instance of svchost.
  • For each of these services, try to stop one at a time (if it helps) and see if the CPU usage goes down. For me, a clue was a service stuck on 'Stop' but never stopped.
  • The service which for me was the "HomeGroup provider." That's why the issue has happened at home and at work. The laptop had spotted my homegroup on my home network, but had not been able to accede. Maybe a problem with IPv6 that I could not turn on my desk.
  • In the Services tab in Task Manager, get on the service properties, which set to Disabled Startup Type.
  • Restart the laptop, to ensure that the service is stopped.

  That did the trick for me, and now the CPU remains less than 5% when idle. This isn't the problem that the fan is noisy when the CPU usage is high, but for me what rarely happens now.

  If you want to access files and printers on your home network without the homegroup feature, you can still do that the old way:

  • Network and sharing Center-Online avancΘs => Homegroup Connection-online 'use user accounts to connect to other computers.
  • Also in the settings advanced: enable discovery network. and Turn on File and Printer Sharing.
  • Then, you can click on your wifi network => add a printer.
  • If your office does not appear, click on "Not listed", then browse. As long as the network discovery and printer sharing are enabled, desktop PC should appear and you can connect using your local Windows user name and password.

  Hope this helps someone.

  Peter

• Why Firefox from writing so given all the time?

  I'm running Windows 7 x 64 and Firefox 8. In my task manager, I display the bytes of i/o to write to all processes. I found that Firefox is ALWAYS the process with the largest amount of bytes in writing, after that it worked an hour or two even though there are dozens of other processes. The only Web page is Google and all my plugins are disabled.

  Why Firefox from writing so given all the time?

  Firefox can be updated from the database of phishing protection or maintenance with other files as places.sqlite. It should be limited to a point if this was done.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem.

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Satellite Pro A120 - fan run all the time

  OK, so this is a strange...

  I have a satellite Pro A120. It works with the fan on all the time and sometimes goes on a mayor go slowly (which I think can be reduced to overheating).

  Operating system is Ubuntu and I installed the tool of sensors that tell me about the minute the temperature is 100 degrees c and the next one is 16!

  I suspect that it is perhaps that the heat sink is full of fluff, but I can't find a guide step by step to dismantle the machine, clean it and put it back together again.

  Can anyone help with ideas or resources?

  Thank you very much

  Nathan

  Hello

  You do not need to disassemble the unit to clean the fans.
  You can use a jet of compressed air which helps to remove dust.
  I did it several times and it helped!

  Try it!

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• Tecra A9: How I get saved keys FN-esse to work all the time?

  How can I get my saved keys FN-esse to work all the time?

  It is without having to use the Toshiba Assist button to bring up the Fn-esse chart on my desk?

  Hi Cameillia

  Please excuse my question, but what do you do exactly?
  You want to use the FN + F1 - F9 button functionality without using the FN key?

  Sorry, but I think that it is not possible

  But if you use Vista OS, then you can use the mouse cursor and might point up, display area and could activate the Vista FlashCards.
  The FlashCards support the same functionality as the use of the keys FN + F1 - F9

  Concerning

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  * Original title: SUPPORT of the PILOTS LOSE INTERNET.

  My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  What do you mean by "driver support?

  If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

  The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

  Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

• Satellite R630 - fan runs all the time

  Hello everyone,

  I have a Satellite R630, and I'm happy with it. But there is one thing that makes me angry... the fan! It runs ALL the time. I browse a little... the fan works. I work with the office, or something... the fan works. To clarify: the CPU is not used, there is no heavy processes running, and the Notebook\CPU is cool. There is no reason why the fan should work, all the laptops that I had before where calm in the same situations. Of course it is not a problem if it starts working if necessary (a game, looking for a HD video or something). But not without reason!

  Someone at - it a solution for this problem? A tool to fix the fan speed\intervals manually, or better: an update of the bios (in the version 1.4 and 1.5 I can choose what I want... the fan did not stop execution). It is also quiet in Linux or any other operating system.

  @Toshiba: (!) Please do something. The only solution for me right now is to return the laptop to the store. :-(

  Best regards
  Imk82

  Hello

  Hmm... If you have already installed the latest BIOS updates, you should check the cooling of Windows Power management settings. Generally you can switch between different methods of cooling as you can read here:

  [How to handle power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm]

• Satellite Pro P200-15W: update according to BIOS 1.9 fans walk all the time

  I have a Satellite Pro P200-15W. After recently running the BIOS update to version 1.9, the fans started running all the time and are extremely loud. Also, he did weird things for Firefox, Thunderbird and NAV.

  I would like to "Uninstall" the update of the BIOS if possible. I found [this link: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1080 89xml & sliceId = & dialogid = 24408215 & stateId = 0% 200% 202 4406262] who treats the restore running CD.

  If I run this CD, which will certainly restore the BIOS to the previous version?

  Is there a less destructive way (ie: that does not erase the hard drive)?

  Thank you

  Ben

  Post edited by: cannboys

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  > would like to "Uninstall" the update of the BIOS if possible. I found this link that explains the running restore CD. If I run this CD, which will certainly restore the BIOS to the previous version?
  > Is there a less destructive way (ie: that does not erase the hard drive)?

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive. The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

  Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

  In addition, the fan works almost all the time that was not the case with Win 8.

  Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

  SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

  I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

  The fan is now more or less normal speed.

  Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

• Why Firefox 23 keeps freezing briefly all the time?

  Firefox has suddenly started to block briefly for something like 3 seconds all the time when it updated to 23. He does something like every 10 seconds. How can I prevent the really annoying short gel?

  I found Skype click for the call module was originally of the gel. The only reason update 24 order to freeze because the add-on is not compatible. He started to freeze up again as soon as he became compatible so disabing add-on solved the problem.

• Why is my mail account crashes all the time.

  My e-mail account on my Mac seems to hang a lot more recent.  Do not know why.  I did not change my account.  I get a message from crash to re - open and all is good for a little while until I get the same message again.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.