My habit. Doesnot INF react exactly the same way on Windows 7, the way that he used to XP/Vista. I used 'Usbser.sys' and wrote my own. The device INF. Please suggestions
Hi all
(Please HELP ME OUT!-I have my camera works on Win 7 the exact way only on Xp/Vista)
I have a camera (with USB port) where in I used the USBSER. SYS and made a. INF file (custom), in order to make my camera work on XP & VISTA. Everything's fine (once the usb is connected to the computer, h/s configuration Manager installs the driver & recognizes my camera and adds its under the MODEM-) find the set. Content of an INF of mine below...
------------------------------------------------------------------------------------
; INF file for the installation of the devices USB compatible serial port emulation
[Version]
DriverVer=08/03/2005,5.1.2600.2180
LayoutFile = Layout.inf
; use the signature for all versions of windows
Signature = "$$XXXXXX".
; Use the following defined system device installation class
Class = Modem
ClassGuid = {XXXXXXX}
Condition = % XXXX
[Manufacturer]
XXXXXXX % = XXXXXX
[DestinationDirs]
FakeModemCopyFileSection = 12
DefaultDestDir = 12
; Models section
[XXXXX]
%USB_Enabled%=XXXXX,USB\VID_0e1e&PID_0501
; DDInstall section
[XXXX NT]
include = mdmcpq.inf
CopyFiles = FakeModemCopyFileSection
AddReg is USB, XXXX.resp, XXXX. AddReg
[XXXX. NT. Services]
include = mdmcpq.inf
AddService = usbser, 0x00000000, LowerFilter_Service_Inst
[XXXX. NT. HW]
include = mdmcpq.inf
AddReg = LowerFilterAddReg
[LowerFilterAddReg]
HKR, 'LowerFilters', 0x00010000, "usbser.
[LowerFilter_Service_Inst]
DisplayName = % USBFilterString %
ServiceType = 1
StartType = 3
ErrorControl = 0
ServiceBinary=%12%\usbser.sys
[FakeModemCopyFileSection]
Usbser.sys, 0x20
[USB]
HKR, FriendlyDriver, Unimodem.vxd
HKR, DevLoader, * vcomm
HKR, ConfigDialog, serialui.dll
COM7 HKR, AttachedTo,
HKR, EnumPropPages, "serialui.dll, EnumPropPages"
HKR, DeviceType, 0, 01;
HKR, PortSubClass, 1, 02
[XXXXX. AddReg]
HKR, properties, 1, 00,00,00,00 00,00,00,00 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00, c2, 01, 00, 00, c2, 01, 00
[Strings]
XXXXX = "XXXX XXXX XXXX.
USB_Enabled = "XXXX USB Serial Emulation."
USBFilterString = "XXXX USB serial emulation"
----------------------------------------------------------------------------------------------------
The QUESTION is now,
(1) I want to know if new, something must be done to it to make sure that my camera works even on Win 7 (like the addition of new sections for windows7 in.) INF, etc etc), also something to see w.r.t. 32bits & 64bits.
(2) in addition, when I tested my camera on Windows 7 (for the 1st time) I have observed that the system has not provided by h/w (as in XP) configuration manager, instead it popup a warning ("There is a threat to your device by 3rd party" - not exact). I have to go to Device Manager and update driver manually... Instead, I would like to than END USER to have the Manager h/w config (of the operating system) of the pop up/initiated the trial...
Thanks in advance...
SAN.
Hello
Check in safe mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
If not try to clean boot and check:
http://support.Microsoft.com/kb/929135
It will be useful.
Tags: Windows
Similar Questions
-
Hi, I'm on a PC running windows 10. I just started using Lightroom CC and wildfire and feature drop for the sorting of the pictures in collections has stopped working. can someone suggest something please?
Your catalog backup and reset the preferences as mentioned wobertc
Press the shift and Option on Mac, or the shift and Alt PC (windows) keys. Select Reset preferences
~ Assani
-
I have a document with 20 work plans. When I resize a that only changes that are. I'm in CS5. Is it possible to resize all work plans at the time the way that you used to be able to do in the configuration of document? Thank you very much!
Wade_Zimmerman wrote:
It's a good script but t vrry does not resize some plans of work and not wouldn't
@ Wade
You can recode and a confirm in the loop to determine if you want to resize the work plan current in the iteration of the loop, if no installation then jump her, if yes then prompt for sizes and move forward. Then you can resize regardless of those that you wish as such, some and not others. You can even distinguish with each confirm and ask what work targeted plan by displaying its name. I tested this approach and it seems to work ok, but not super stylish, of course, because if you have tons of work plans, it would be a large number of guests/entry. You could lesson prompts by combining the width/height in a single guest. But then again, even at this time sound just as effective to resize each manually via the window of work plans, probably the same amount of work/time user input processing and the targeting of individual work plans. You could perhaps also create script window for multiple entry for plans of work desired, may be based on the selected and build your dialogue window accordingly, I suppose that, at this time, it would provide a more effective approach for this kind of thing that you seem to be describing.
But that all said that we would be well beyond the original request that CarlosCanto already so generously filled. He might have some comments on your comments.
-
It is the main thing that I use on photoshop and now he's gone. I'm really disappointed
Kathy, if you go back to the previous version of Photoshop CC, who still has the oil paint filter. If you have not installed, open the application manager, click on the drop down filter and choose previous versions.
-
Hello
I'm not able to execute the procedure using dblink in PLSql block.
Although he works outside the end of the beginning.
Please suggest solution
Hello
Thanks everone for your contributions,
As well as the permissions, I used to run inside the PL sql block, which was not necessary, we can simply call the procedure using dblink.
Thanks guys,.
-
Stick media in the same way that it has been copied / cut
I read that some-related posts in this forum, but none that seemed identical to this one...
Is there a way to change the way that the first treaty for the media stuck in the timeline? When the FCC was still a professional program, regardless of the way your media copied lived on would be the destination for the stuck media. He had a sense and allowed a fast workflow.
I understand how default first unnecessarily sticking in the titles 'active', but this adds a step to my way of thinking that I'm editing. I thought that by actively all the tracks, I would be able to work as I have FCP, but any material glue in the 1st track of course.
I know I'm nit picky. But after more than a year of the daily edition, I just can't get used to how to first work with collage. Approach of FCP on this aspect of the average edition above. This is one of the only two differences between FCP7 and first that bothers me every day.
Is there a way to change the way the program copy and glue?
Short answer: No.
See here:
Correction of the source in Premiere Pro sequences
Long answer:
-
Dear all,
I want to buy the subscription CD Player Adobe Acrobat, but when I click on the subscription link and it says that my country is not in charge of this subscription.
Is there anyway to buy this subscription? kindly ask you to suggest solutions for the same.
Kind regards
PS
However, subscriptions are available only in some countries, it is true.
-
Got the following error please suggest ways to solve this problem, thank you.
I have Windows vista home basic version and received the following error message. Not able to install new programs so lately. Apart from that if I right click and try try to customize it would not allow me to... file opens and closes by itself!Product Windows® installation problem stopped working
Problem event name: BEX applicationFault Module name: MsiHnd.dllFault Module Version: 4.0.6001.18000Hi RamakrishnanS_1080,
· Have you made changes on the computer before this problem?
I suggest you follow these methods.
Method 1: Follow the steps in the article.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
Method 2: To the question to customize, follow the steps:
Step 1: Start the computer in safe mode and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.
-
I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?
Lol it won't play in my DVD player either. Just the computer.
=====================================
This could be a hardware problem with your DVD writer
but here's something you can try.Create your slideshow (photos and music) in the film
Creator of... and then publish the file to a folder on your hard drive
walk in the .wmv format.Windows Vista
Getting started
Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-MakerWindows Vista-
Publish a movie in
Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerThen try to use the following free software to burn your DVD:
(FWIW) It's always a good idea to create a system
Restore point before installing software or updates)DVD Flick
http://www.dvdflick.NET/Be sure to read the Guide:
http://www.dvdflick.NET/Guide.phpIf you have problems to download DVD Flick...
Try the following direct link:
http://tinyurl.com/yzx9sck
or...
http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayerSave the file to a folder on your hard drive and
install from there.Tutorials:
Tutorial DVD Flick
http://beginwithsoftware.com/videoguides/DVD-flick-Guide.htmlBurn any Format video DVD PC
http://www.freevideoworkshop.com/dvdflicktutorial.htmTo create a video DVD base that should play in a free
permanent drive DVD... try the following...Good luck.
First... read the DVD Flick Guide to familiarize
with the program.Open DVD Flick and insert a blank DVD in your drive.
If the window of Autorun from your computer... just close it.
Click the project settings button and check... Video /.
Target format... residents United States... Choose... NTSC /.
Accept.The title button left click Add and navigate to your
Video clips and select the ones you want on the DVD.You can have by selecting one and then use
the up and down buttons.Left click on the button create DVD / OK / Yes / Yes.
Please wait while the DVD is created.
When the text "Completed successfully" is displayed you
DVD Flick can close. Now you can eject your DVD
and play in your DVD player.At some point you might want to buy more
Advanced Cyberlink, Nero, Roxio, software
Ulead, etc... but at least it is a start.Good luck.
John Inzer - MS - MVP - digital media experience
-
I have a valid Windows 7 Professional installation as well as a copy of VMWare Workstation running on Windows 7. I would like to install a VM Windows 7 that I can "break" without worrying about my host system. Can I use the same product key for the virtual machine that I currently use on the host system, or do I have to buy a different product key for the virtual machine?
Thank you!
No, you will need to purchase an additional license. The virtual machine is considered to be a separate computer.
http://www.Microsoft.com/Windows/buy/default.aspx
http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key
2. INSTALLATION AND USE RIGHTS.
a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.
b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.
c. number of users. Except as provided in these license terms, only one user may use the software at a time.
d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.
-
I tried to close the time downs, tried to see what that the aid program was same and various other things nothing is worm the same is just out
It could be a temperature problem. Go to http://www.download.com and download SpeedFan. It will tell you what are the internal temperatures. If base temperatures under 50 degrees C, you are very good, over 65 is a problem and between two bears watching.
If not, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
-
I hope this helps. Good luck. -
I have no problem as such, just the question above.
In my view, there are extensions, but you can use the keyboard shortcuts
- "Ctrl + B" to toggle the sidebar bookmarks in/out or replace a different sidebar
- "Ctrl + H" to toggle the sidebar history entry/exit or replace a different sidebar
-
Updates, I keep getting notices to install are as follows: (I have already installed these updates several times more)
Update of security for Microsoft Office 2007 Suites (KB2760411) 7.7 MB
Update of security for Microsoft Office 2007 Suites (KB2760588) 7.5 MB
Update of security for Microsoft Office Excel 2007 (KB2760583) 7.7 MB
In the past I used CCCleaner to coolnes the regeistry, but it was not for awhile (2 months)? I have noticed that this condition yesterday.
-
Firefox does not open google the way that it used to
I use Windows7-Outlook2010
New computer with Foxfire and IE installed. Foxfire was my default browser and opened it with Google very well. Today, I wanted to change my home page IE but changed unintentionally in Foxfire. When I tried to change Foxfire to Google on the opening, I had a totally different format... Google Yes, but when I walked into research, small and towards the top left box and started with Googles boring Google Suggest. How can I get it back to normal? You hear me cry? I would really appreciate your help. Thank you.From Firefox 4.0, Mozilla has changed the http://www.google.com/firefox Firefox Start Page to Subject: House .
What is the URL of the Google page that does not work as he has already done?
Please provide a screenshot of your problem.
https://support.Mozilla.org/en-us/KB/how-do-i-create-screenshot-my-problemIt is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
-
Please tell me how to cancel the last iPOD update mess that I did on 13 Feb 16. I no longer see playlist or my 1008 songs I have on iTUNES. now I see just short list of songs that I have and it seems that if I hit these songs there is a charge next to this very short list! I have 10 windows & had enough probs with windows update & now have the same disorder after the last update for iPOD! am desperate for advice! am retired w / limited $$$ & I just want to enjoy the music, I've already paid for the iPOD. Thank God I did not alter the songs on iTUNES! Please help am desperate
It is an iPod touch? It is said ' iOS 6 ' in your profile information. What is the updated version? If not, what version you have currently installed.
I don't know what "iRADIO" is... Are you referring to the Apple Music music streaming service?
Maybe you are looking for
-
How can I know if CleanMyMac3 has hurt my MacBookPro?
I've read a lot about how CleanMyMac isn't good, and now I'm worried that I hurt my MacBookPro I bought only two weeks ago. I migrated all the content from the old computer to the new, which included CleanMyMac3 (disk and MacPaw Gemini exercises). Th
-
What is alotHome and how it remove?
I was told alotHome was spyware or maleware
-
Application still works after changing the drive letter?
XP is installed on drive C and all applications are installed on drive D, if I change the letter of the drive from D to E, would still be able to recognize this change on all the programs installed in XP? or will it be impossible to locate the drive
-
Unable to access earlier restore points
original title: recovery Sestem problem I have XP home installed and tried to do a system recovery. When I arrived at the page with the calendar on that I couldn't choose an earlier date. I'm on automatic update and I was wondering if a recent update
-
I want to delete a program as a default program
WorldPad was used as my DEFAULT program so it made other programes does not open. How can I remove and open all my programes easily as before.