my hp 6500 has more all in an office jet is not printing with magenta and yellow why colors?

Similar Questions

• OfficeJet 6500 has more All-In-one: network of disabled features

  hP 6500 has more all - in-one E710 gives the message "integrated network capabilities have been disabled contact your network administrator" when I go to network menu.  I rest to factory default and get restarted three times and still the same message.  Powered down of every thing.  Same result.

  Hello @Walt101,

  I would like to help you today to correct the message 'integrated network features have been disabled. Contact your network administrator' on the front panel of your HP Officejet 6500 a Plus e-All-in-One. This feature is programmed into the printer itself and can be disabled under webserver shipped as part of its security printers.

  If you have configured an admin lock on your printer, you must collect the IP address, your printer off and access the printers built-in web server by entering the IP address in the address bar of the internet browser on your computer. Once you access the built-in web server, you can configure the administrator lock settings.

  If you have not set up a lock on this machine to 'lock' the network capabilities, I'll have to send you a private Message with the semi-complete programming reset so that you can win your network of return capabilities. Please check your private Messages for instructions.

  Good luck!

• OfficeJet 6500 has more all - all-in-one makes weird noises like strings for guitar was extirpated

  Operating system is Windows 7.  Bought 2 years ago.  Worked fine until about 2 months ago, when he started to make loud noises.  Will print still, she began to stop in the middle of print intermittently job.  DIY online resources say that it needs to be cleaned.  I hesitate to try to do this without instructions or other suggestions from HP or a member of the community who has solved this same problem.  Cannot find any printer repair shop that will serve an inkjet.   Any ideas?

  Hello my shadow,

  Welcome to the HP Forums! I understand your Officejet 6500 a fact of loud noises. Please follow these steps to try to solve your problem:

  Now, determine the noise is coming from can be difficult, and it could also be a number of reasons why.

  Make sure that the printer is connected to a live wall, not a surge protector. This step is required because it will check if you have the same problem.

  Sometimes paper stuck in the printer can make these noises or to transport back and forth.

  This document here, HP is the right section to double check there is no paper in the printer.

  Try to clean the rollers of paper of this HP document on The Noise is produced when you print.

  I would like to know how your progress.

• HP 6500 has more than 4 in 1 machine can not scan wireless in Vista

  I can not scan from my HP 6500 a Plus 4 in 1 machine to my computer wireless wireless running Vista Home premium (64-bit). HP technical support says that the problem is with the function of WIA scan on my computer. Any help would be appreciated

  * original title - can 't scan from my HP 6500 wireless has more than 4 in 1 machine. According to HP, the problem is with the function of WIA scan on computer (Windows Vista). Any information would be appreciated *.

  Hello

  Uninstall and reinstall the HP scan utility and check if this solves the problem.

  You can download it from this link:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3795406&

• HP Officejet 6500 has more all -: want to print, get fax screen etc.

  I am trying to print a document, shows data, fax sending fax etc how do I cut the portion of the printer fax?

  @dman51

  Assuming that the full feature software is installed, the following may be enough to solve:

  Set as the default printer

  I don't know how 'disable' the fax software - if you do not set the parameters, fax is essentially disabled the fax program does nothing - useful or harmful.  You need a landline connected to use fax - leave the disconnected landline and fax is essentially disabled.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• Problem with Officejet 6500 has more wireless on my Mac running Lion

  I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

  Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

  I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

  Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

  I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• Windows 8 does not support HP Officejet 6500 has more

  Dear all,

  My operating system is Windows 8, however, when I install the HP Officejet 6500 has more, I'm unable to install the printer driver. The error message "the operating system is not supported".

  I would also ask HP to meet this emergency request.

  Thank you

  George Tay

  Hello

  Where do you find the printer driver? From the CD? I believe that the CD is released before Windows 8. This can help:

  http://h30434.www3.HP.com/T5/Windows-8-release-preview/Windows-8-driver-information-for-LaserJet-ScanJet-and-other/m-p/1856247/highlight/true#M703

  Kind regards.

• Setting up my HP Officejet 6500 has more the Question: first install the disc?

  Hi all!

  I was wondering if I should install the disc that came with my HP 6500 has more printer FIRST before connecting it to the top wireless? Or connect upward wireless first before installing the drive?

  I saw somewhere where the plug & play when the connected printer caused some problems that did not accept the disc that came with the printer it seemed to replace the drive.

  Any help would be appreciated before doing anything with the hook to the top of my new printer.

  Thank you!

  If you connect the USB printer that the answer is YES.

  First run installation, during installation, you will be asked to connect the USB cable, then only, you need to connect.

  Kind regards

  Shlomi

• HP 6500 a Plus: HP 6500 has more won't copy

  This old all-in-one device has served reliably for many years until today.  It prints and scans but won't copy glass.  I unplugged the wall for 30 seconds and then tried a second time with the same results.  Help!

  Hi @nsbguy,

  Welcome to the Forums of HP Support!

  I see that you have problems of the flat bed scanner glass copy on your printer HP Officejet 6500 has more. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that this printer has been very reliable for you, which is nice to hear. I see that you are able to print and scan, but they are not able to copy from the glass. I guess that when you scan using the ADF?  If the printer is capable of scanning, it should be able to copy.

  To try to determine the cause, I will need more information.

  • Are you able to scan using the glass flat?
  • What happens when you try to copy?
  • What is the error message that you receive?
  • Are you getting what output it, or is it empty?
  • What you're trying to copy?
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would also try to update the firmware of the printer. Click here to download it.

  In the meantime, to help determine the cause, try the steps outlined in this document, HP Officejet 6500 has e-all-in-one printer series (E710) - copy and Scan outputs are completely black.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP officejet 6500 has more poster "original jam". There are no jams, how do I clear the message?

  HP Officejet 6500 has more poster "original jam.  Clear the jam, and then press 'OK' to continue. "There is no paper jam and the printer will print as long you don't try to use the automatic charger.  However, the error message continues interfering with scanning and other print jobs.  Any ideas on how to clear the error message?  I tried to reset, nothing helps.

  Thank you.

  Hello HPAllinOneSande,

  Perhaps there is a jam that is located somewhere on the printer. See if you can follow these steps to clean the error and the jam.

  ' Original jam: clear jam and press OK "Message displays on the all-in-one

• HP Officejet 6500 has more by using a different IP address than before

  I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

  I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

  Any suggestions? Can I print using USB, but it's embarrassing.

  Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

  If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

  From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

  To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

  Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

  As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

  The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

  Hope this helps

• OfficeJet 6500 has more fax keyboard disabled

  Hello experts,

  I have a printer officejet 6500 has more, and I have questions sometimes when you send a fax.

  In some cases, after dialing the phone number of receiver, automatic voice ask redirect the fax to a number given (eg. "dial 26 Fax").

  Anyway, the keypad of the printer is disabled after dialing the phone number and I can not send the fax. How can I activate the keyboard when calling the digit numbers requested by automatic voice?

  Hi there ofblack, welcome to the forums

  I saw your post on the fax concern you have. First of all, I suggest you to check on the Page. 48 of the User Guide , which is to monitor dial to see if this information will help you. As long as you enter the numbers fast enough, the fax needs to work with the numbering screen, otherwise, you will need to use the phone to enter all the guests under send a fax manually from a phone.

  This guide is the standard troubleshooting for fax so that might help: I can't send or receive faxes

  Have a great Thursday

• I have 3 PC home networking with a router. How to connect my new hp 6500 has more so any pc can print

  I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.

  Mike4D

  Hello

  You can choose one of the following 2 options:

  

  Option 1: simila in the image above

  Connect the printer to the router,

  Connect a PC to the router (not wireless computer)

  Option 2:

  Connect a PC to the router (not wireless computer)

  Connect the printer to the wireless router

  Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.

  Please use the following book to configure things

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.