My hp deskjet 1050 J410 series is not compatible with windows 8?

Similar Questions

• HP Deskjet 1050 J410 printer is not compatible with windows 8?

  Hi, I just bought the HP Deskjet 1050 J410 series printer. When I try and run the cd on my windows laptop 8 it comes back with a message saying "your OS system is not compatible with the series hp deskjet 1050 J410." I was wondering if you could help me with this? Thank you

  Hello dhwany,

  Download the driver on the web.  You can follow the instructions to install here.

  Please let me know if this helps solve your problem.

  Good luck!

• DeskJet 1050 J410 series does not Excel files print

  My printer does not print Excel files.  I have read some other posts that suggest to reinstall the printer driver I did.  My printer print Excel for awhile and then a few weeks later, it will not print again.  There is no error message.  The print queue displays a document to print, then just disappears.  I guess I will upload once againprint driver, but I don't understand why it keeps doing it.

  Hello

  Please uninstall the driver first by going to control panel-> programs--> programs and features, and then UN-installing from there.

  Download the latest driver full features software (please correspond to the version of the OS system pilot & 32 bit / 64 bit with the system and the PC OS).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=Al-109412-2&mode=4&IDX=1&JumpID=reg_r1002_usen_c-001_title_r0003

  Re-install the software downloaded and see if the problem still persists.

  I hope this helps.

• HP deskjet 1050 J410 series: first levels in hp deskjet 1050 J410 series ink

  I'm unable to check levels of ink on my printer hp deskjet 1050 J410 series.

  I have always used the following method worked well, but WILL NOT WORK today!

  Past the method: -.

  1. click on Control Panel on the desktop

  2. right click on the printer icon.

  3. click on keep your printer (to get the dialog box containing the estimated ink levels wording.)

  My problem:-I cannot find anywhere MAINTAIN YOUR PRINTER formulation that would allow me to access the dialog box mentioned in (3) above.

  Can anyone help please because I am at the end of my mind, I searched everywhere to no avail on the computer for a

  solution!

  Thank you very much.

  Joe

  The steps described in the paper here can help find the ink level for your HP Deskjet 1050 j410 on Windows 8.1.

• I am trying to install a hp deskjet 1050 J410 series but I have have the disk what can I do to install it?

  I am installing a printer hp deskjet 1050 J410 series I have no disk, what can do?

  driver 32-bit:

  Microsoft Windows 7 (32 bit)

  64-bit driver:

  Microsoft Windows 7 (64-bit)

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• HP Deskjet F4850 is not compatible with window 8. Is there a driver for this update?

  I just bought a new laptop with Windows 8. HP Deskjet F4850 is not compatible with window 8. Is there a driver for this update?

  Hello

  The printer make compatible with Windows 8, of course not the original CD which is way before Windows 8.

  Download and install the software below, for USB connection remember to keep the cable disconnected until you will have to connect:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109196-2&cc=us&DLC=en&LC=en&OS=4131&product=3944758&sw_lang=

  Shlomi

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• HP Mini 110-3101TU: HP Mini 110-3101TU is not compatible with Windows 10?

  I've been running my HP Mini laptop in Windows 7, IE11 with an external (extended desktop) Samsung SyncMaster LS23A300BS/XP with no problems of navigation. All drivers up to date. I received a free upgrade for Windows 10 I installed online 2 weeks ago and have not been able to make a good navigation on the internet yet, either on board or IE11: both crash in browsers after a 2nd or 3rd browser, blocking and the opening page process may not be finished in Manager tasks so that Windows can not stop (you need to disconnect). I followed all the advice, corrections and common sense (clean boot) pertaining to this crash, but nothing works. On top of this crash, there is a problem with the application of Windows Explorer which can not read a statement in memory at shutdown of Windows 10 and must be closed in the first place. The last problem occurs only (I think) when working with the external montor, when I work with the laptop only I've not seen this message (can not read the instructions...) when stopped down, but blocks the navigation happens tirelessly with one or two monitors.

  I played with the DNS (using automatic 8.8.8.8 etc. and DNS), I also run a PowerShell (tip forum) command and disabled non-Windows file extensions and all supplements but did not touch the registry other than adding two words for maximum 10 tabs/server. Nothing helps.

  Question: My Mini laptop too old and incompatible (surfing the internet) with Windows 10 or maybe Windows 10 faulty (buggy)?

  I am writing this post with my old Compac HP 8710p with the same monitor external but digital (DVI/HDMI cable) in VistaSP2 32bits Business that works like a 'charm' (pun intended). I could not even connect you to this forum with Windows (crash) 10.

  Any suggestions and help would be appreciated

  Track 5 September 19:00 (GMT + 8 hrs.)

  Not crashing with browsers (Edge and IE11) but still very slow and often-page response cannot be found and freeze, then after updating but I am now able to close the frozen pages (no more crashing, process in normal Task Manager). The message Windows Explorer app that it cannot read a statement in memory occurs that when my external browser is connected (2 active monitors) and does not show using my laptop just so it's probably Intel graphics driver related. I didn't know I was downloading Defender 5 updates yesterday that there is nowhere a notification in Windows, 10 with a slow (home, 2 G WIFI) internet connection may have caused some of my problems, but Microsoft has promised to look into the crash problems I brought today and I'll post the results shortly. I type this follow-up with my HP Mini and IE11, Windows 10...

  Frank

  To follow this thread on the Microsoft Forum please see:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-networking/HP-mini-110-3101tu-not-compatible-with-Windows-10/262e92c9-5f73-4333-BC46-fb5b229fbdea

  Frank

  Updated: 9 September

  I found three issues that I fixed and most of the problems have disappeared now, internet Windows response is still slow compared to VistaSP2 and IE9 but which can improve with W10 updated.

  The last driver Synaptics touchpad from Synaptics and Windows 10 fix1 support web page: load automatically downloaded an update.

  Correction 2: Downloaded Intel driver 3150 8.14.10.2230 (2010) of the web page of the HP support and ran Windows 10 compatibility check, saved results to setup.exe and then install the (older) driver on my graphics driver (2015) Intel 3150 more recent that I have downloaded from the Intel support web page but is not compatible with the HP Mini 110 series. This caused the accidents of Edge and IE11 (zoom).

  Fix 3: run 2 commands (admin) NETSH: netsh winsock reset and netsh int ip reset c:\resetlog.txt which improves the response of browsers, but after restarting the need for procedures to be repeated, if all goes well in a future update of the W10, will address this issue.

  I think that my HP Mini is now compatible Windows 10

  Frank

• Compaq Presario: NVIDIA GeForce 6150SE nForce 430 chipset is not compatible with Windows 10

  I try to upgrade to Windows 10 and I get message that current chipset is not compatible with Windows 10. My PC is Compaq Presario motherboard M2N68-(NARRA5). Is there a graphics card for this motherboard is compatible Windows 10?

  You need to burn a DVD to install windows 10. It's going by checking the video card. https://www.Microsoft.com/en-us/software-download/Windows10 32-bit or 64-bit. Then after win 10 is installed, and then install the 32-bit or 64-bit driver http://www.geforce.com/drivers/results/82758 64-bit video dated the 2015 http://www.geforce.com/drivers/results/82701 32-bit dated 2015 good luck it really works

• X 1 carbon Windows 10 upgrade problem: "it is not compatible with windows 10 display.

  Try to update to W7 (64-bit) to W10 on X carbon 1. W10 diagnostics return with "the display is not compatible with Windows 10." All display drivers are huge downloads and I don't know which one to use. I'm NOT a tech person. Help? Thank you.

  
  

• Windows 10 November update stops at 32% saying that Intel 5100 Iris was not compatible with windows 10

  I use a Mac Mini 2014, El Capitan, Windows 10 Pro with Bootcamp

  I'm trying to update my existing windows 10 in 1511 10586. 32% the system constantly to say that installing Windows 10 his is not possible, as the Intel 5100 Graphics Iris is not compatible with Windows 10. On the other hand I'm already on Windows 10 with Iris 5100 with no problems. No idea how t resolve that? I did find something similar in any other forum...

  Thanks for your help!

  Windows 10 1511 pushes a WHQL driver on the 5100. Before you start the upgrade, please disconnect the Internet Mini/Windows and then try again. You can also disable the automatic updates of Windows.

• OneKey Rescue is not compatible with Windows 7

  Hello

  Recently, I installed my free upgrade to Windows 7.0. I was invited during installation that the OneKey Rescue 6.0 is not compatible with Windows 7.0. Is there a program I can download and use?

  Thank you!

  OneKey Recovery 7.0 for Windows 7 32 bit

  OneKey Recovery 7.0 for Windows 7 64 bit

  Take advantage of .

• XP to Vista upgrade, the message that Vista is not compatible with Windows XP

  Original title: Upgrade Vista XP

  I tried to update my windows XP to Windows Vista and get the error message that Vista is not compatible with Windows XP. It is an original cd of dell that I got years ago and have not upgraded I liked XP. Any thoughts on patches or fixes for this?

  Hi Dennis,

  The upgrade to Windows Vista from Windows XP requires some preconditions for the computer that you have this problem in. This article treats all these prerequisites. I suggest you read the information in this article and see that if your situation meets all the conditions required or not, here is the link:

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-Vista

  Please check all of the information provided in this article carefully. Keep us up-to-date with the status of your side, we will be happy to be of further assistance.

• Video card issues 'Windows cannot read this disk. The disc is maybe damaged or it could be in a form that is not compatible with Windows.

  Original title: card video questions

  My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?

  Hi TheRealBradB,

  ·         The computer is on a domain network?

  You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.

  GeForce 8400 GS video card

  http://www.nvidia.com/page/GeForce8.html

  You can run the Autodetect your GPU and check the drivers.

  Also contact nVidia support for help on the issue.

  NVidia support

  http://www.nvidia.com/page/support.html

   

  Hope this information is useful.

• Error: "drive could be damaged, or it could be in a form that is not compatible with Windows.

  Original title: CD - R driver problem please help if you can

  I have a white mark of Memorex CD - R into my drive (D :) and when I try to read it, this happens, "disk may be damaged or it could be in a form that is not compatible with Windows. I have Windows XP on my desktop, any suggestions for help? :(

  Hi MichaelPrincipe,
  -Other recognized CDs without any problems?
  Try to use the CD on another computer and check if it is recognized without any problems.

  Run the fix it tool is given in the link below and check if it helps.

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems