My HPE h8-1220 has two sata4 and sata5 sata connectors. It has a modular connector.

Similar Questions

• Can I add a third hard drive to h9 Pavilion HPE currently have an SSD drive and a SATA drive?

  HP Pavilion HPE h9 (Phoenix), win 7 64

  Can I add a third SATA drive to my system?  The specs say three bays are available, but when I ordered it I could not add a third (or greater than 1 TB drives).  Is there something on the SSD that changes the spacing of the drive Bay?  I prefer not to take the walk outside if there is no way to add another drive.

  Hello

  Please report the number of HP for your PC product.

  You review this article and video?  You will need to remove the cage hard disk to install the third hard disk. In general, the SSD is in the middle of each side mounting with HDDs of 3.5 ".  Hard drive cage is made for three hard disks.

  The specifications indicate theProvisioning for three hard drives on this particular model. The firm seems to be the same as the other two models HPE H9.

• After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  Care to be more detailed?  What version of Windows?  What is the brand and model of the laptop?  How old was he?  Have you contacted the provider support?  What has changed on your PC between when it was last and now?

• having two monitors and somehow a shortcut has been programmed

  Hello, I have two monitors and somehow a shortcut has been programmed, when I click on the button 1 what ever I'm working on the switches to the other monitor. When I click on the number 2 key it puts the window at the first monitor. Is it possible to disable this option? Thank you

  Hello, Kaarne,

  Right click on desktop

  Select the Graphics Options in the menu

  Select quick access keys

  Select Disable

• I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I

  I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac

  Hello

  Please see connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard?

  Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard? I'm used to be able to do this simple action.

  No, there is no change in this regard. Exactly how you try to change the links? In Design view or by BIE? Also are you referring to the default menu or a manual.

  Thank you

  Sanjit

• HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update

  Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970.  I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.

  Here is more information on my system:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-300-desktop-PC-series/4162190/model/427545...

  Right now I'm really confused!

  After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.

  I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!

  To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!

  I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]

  Here are my results: http://www.3dmark.com/3dm/6457066

  I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!

  I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!

  I close on my computer about ten times, just to make sure that the system is stable and still no problems!

  Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 447 & authkey =! HfU-APzSFQeV0Il & v = 3 & ithint = 2cjpg % photo

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 446 & authkey =! AGmYzz92v2tiaNw & v = 3 & ithint = 2cjpg % photo

  I only used it for two days and I hope I won't run into problems in the future!

  So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!

  PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]

• Align the two signals and measure the Phase Shift

  Hello

  I do an experiment in which I use the NI USB-6221 DAQ card. The jury is able to make 250 k samples/second. I want to measure two voltages in a circuit and find the phase shift between them at frequencies between 1 and 10000. First I ouputted a wave sinusoidal frequency variable through the Commission and applied to a test circuit. Then I used the Board to measure the two tensions consecutively (thus reducing the maximum sampling frequency at 125 k). I used the signals align VI and measured the two phases and then calculates the phase shift (VI attached in Phase 1). It worked well for the test circuit I built in which the phase shift went way logarithmique.20 degrees ~84.5 degrees and then stabilized. At frequencies above 5 000 Hz phase shift must have remained constant, but it varies more or less 1 degree. When the phase shift is 84.5 degrees, present a degree of variability is not particularly explicit. When I asked my program on the circuit that I really wanted to measure, the phase shift went from-. 5 degrees up to about 1.2 degrees. The change in the values of phase shift at high frequencies (> 3000) was environ.2 degrees. Given the small phase shift, this variation is unacceptable. Now I tried to use a sequence to each blood individually (increase the maximum sampling frequency to 250 k) and then align the two signals and measure the phase of each shift. When I use align it and re - sample Express VI to realign the two signals, I get the message "error 20333 analysis: cannot align two waveforms with dt even if their samples are not clocked in phase." Is it possible to align two signals I describe here? I enclose the new VI as Phase 2

  Matthew,

  I think I have an idea for at least part of the problem.

  I took your program data and deleted stuff DAQ.  I have converted the Signal on the chart control and looked then what was going on with the signal analysis.

  The output of the Waveforms.vi line has two waveforms, like the entry.  However, arrays of Y in the two waveforms are empty!  It does not generate an error. After some head scratching, reading the help files and try things out, that's what I think is happening: the time t0 two input signals are 1,031 seconds apart. Since the wavefoms contains 1,000 seconds of data, there is no overlap and may not align them.

  I changed the t0 on two waveforms are the same, and it lines up.  The number of items in the tables is reduced by one. Then I increased the t0 of 0.1 seconds on the first element. The output had both greater than the entry by dt t0 t0 and the size of the arrays was 224998.  Reversing the t0 two elements shifts the phase in the opposite direction.

  What that tells me, is that you can not reliably align two waveforms which do not overlap.

  I suggest that you go to 2-channel data acquisition and that it accept the reduced sample rate.  You won't get the resolution you want, but you should be able to tell if something important happens.

  You may be able to improve the equivalent resolution by taking multiple steps with a slight phase shift. This is similar to the way that old oscilloscopes of sampling (analog) worked. Take a series of measures with the signal you are currently using.  The make enough average to minimize changes due to noise. Then pass the phase of the signal of excitement to an amount that is smaller than the resolution of phase of sampling rate and repeat the measurements.  Recall that I calculated that for a 5 kHz signal sampled at 125kHz, you get a sample every 14.4 degrees. If shift you the phase of 1 degree (to the point/mathematical simulation), you get a different set of samples for excitement.  They are always separated by 14.4 degrees.  Take another series of measures. Transfer phase another degree and repeat.  As long as your sampling clocks are stable enough so that frequency does not drift significantly (and it shouldn't with your equipment), you should be able to get near resolution of what you need.  The trade-off is that you need to perform more measurements and may need to keep track of the phase shifts between the various measures.

  Lynn

• The lines appear on one of the two monitors and not on both.

  Original title: what are these lines?

  

  These lines appear randomly on my wife's computer at work. The pc is win7. It has two screens and this will appear on the screen, but not both. TI people have looked and fiddled around with the PC and proclaimed it fixed. She sent me this screenshot well after that IT "fixed". While I can't go to work on a computer in New York State, I am confused and became curious to know what this could be. Lines appear on top of any application is open and will not appear in what it to be printed. Very strange.

  Uninstall and reinstall any AMD or NVidia graphic drivers

  If your use on the update of the chart of the chip value drivers

  Reset the monitor via the buttons at the bottom of the screen.

• Can someone tell me what are these two programs and what they're doing, Microsoft Visual C++ Redistributable, and AMD USB Audio Driver filter?

  Can someone tell me what are these two programs and what they do?

  1 Microsoft Visual C ++ 2005 Redistributable 2. AMD USB Driver Audio Filter (Advanced MICRO Devices Inc.

  .

  Hello

  Here's the explanation for details, requested clarification on the following programs.
   
  1 Microsoft Visual C++ 2005 Redistributable
   
  Most common programs are written in a program called C and C++, which is widely used by developers and they are a source of standard libraries what software use to support and to perform their designated functions.
  
  When software is installed in the computer, he needs help / support of software of Visual C++, in order to avoid a software to download the copy of its source or support a coding Windows has integrated the software and download and storage space a s it updated to make it available to the software and to avoid unnecessary.
  It is strongly recommended that you keep your C++ updating so that no Microsoft software or third party to download an individual component each time.
   
  http://www.Microsoft.com/downloads/details.aspx?displaylang=%20%20%20EN&FamilyID=766a6af7-ec73-40ff-B072-9112bab119c2#AdditionalInfo
   
  2. filter driver Audio USB AMD (Advanced MICRO Devices Inc.
   
  It is possible that you are using a product from AMD (card mother or specific device) and this particular software can be a pilot allowing filters update USB ensure operation smooth and full and for a device and its properties.
   
  Please let us know if you are facing problems with the software above, to receive the appropriate troubleshooting steps.

• I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly a

  Hello

  I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.

  Hello

  Also see also software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• I have two bookmarks and Favorites in my toolbar how can I delete one of them

  I initially imported my bookmarks on mozilla firefox to internet explore. I have now TWO bookmarks and Favorites in the toolbar. I need only one of them. Please can you advise me on how to remove one of them.

  If you have favorites listed, it will have been added by an add-on such as PlainOldFavorites. You can uninstall the add-on and the Favorites menu disappears - https://support.mozilla.com/kb/Uninstalling+add-ons

• Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Non - PEAK is not a feature of iPhoto or Aperture - this is new with Photos

  LN

• Firewall prevents the two outgoing and downloading data

  Original title: Firewall blocked

  firewall prevents the two outgoing and data download to get thur - when trying to review the status of firewall messages setting for some reason connection cannot be completed question began about two weeks is there is alos prevent preventing me from getting to updates software on most of the occassins download is so slow or outgoing computer search will display connection can not be filled - any version of xp windows-ideas

  Hi Wayne,

  You can check this article here to see if it corrects the problem.

  If that doesn't work, see this article. See how it goes.

  I hope this helps!

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.