My imac crashed and required a new hard drive. I have downloaded lightroom again but my library of images is gone

Similar Questions

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• I had a computor crash and bought a new Mac. I reinstalled with Time Machine, but now my say kode 150:30 CS4

  I had a computor crash and bought a new Mac. I reinstalled with Time Machine, but now my say kode 150:30 CS4

  You must install the Adobe applications... their transfer is generally ineffective.

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

• Recover Windows Vista and Office to new hard drive

  original title: had to install a new hard drive... How can I get Vista / back-office?

  My hard drive crashed.  Installing a new.  But how to make office of vista installed on new hard drive.  the computer came from HP with vista / office is already installed.

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro M45 overheating after a few updates and installation of new HARD drive

  I have a sat pro p4 overheated now. I tried the old hoover and this does not work. The thing is that both fans do not seem to turn on. All this happened after I downloaded some updates to put on a new hard drive, I bought.

  Now the fans are not at all turns. My m/b is actually a model of the A45 and I put a 2.0/128/400 CPU inside. The old man who was in it is a 2.4./512/533

  It seems that you have changed almost everything on the laptop.
  Motherboard, CPU, HARD drive, etc.

  Believe me; It s not easy to say why fans don t start. How everyone should exactly known what you did on your laptop?
  Maybe the card mother doesn t provide the power for the fan or the connection is failing.
  Are you sure that the motherboard is ok?

  Unfortunately, all we can do is to hear from you.
  But usually some diagnostic tests are needed to locate the fault.

• Move all my data and OS to new hard drive

  Hello world

  Well, my problem is that my hard drive which I installed today is insufficient memory.  I can only have a hard drive connected to my computer if I want to transfer everything (including Vista Home Premium) to the new hard drive.  I installed the new hard drive and disconnected my CD player in the process so that both hard drives are now connected and installed ready for operation.  I know how to back up files in windows, but I want to spend all completely (cookies, programs, photos, Vista, etc.) or as much as I can.  I will have to reinstall the programs, but I don't want to reinstall Vista.  I hope that was enough information and thank you for your help!

  See you soon

  Disk manufacturers hard software power of cloning to do what you want to do.
  Check on their website.

  And read this:

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  The foregoing does NOT apply to you if it is recommended, as you have Home Premium.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~.

  For the 3rd party software to do:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  See you soon. Mick Murphy - Microsoft partner

• new hard drive recognized in the device mgr but not my computer how to format?

  bought a new hard drive for additional storage running on xp home SP3.  It is recognized in the bios and in Device Manager but not on 'my computer '.  How can I access it to get in shape or to install the NTFS file system on it (if the formatting is incorrect terminology) then it will become usable as a storage device.

  You use the disk for this purpose.

  Start > run > diskmgmt.msc > OK

  Right-click on the unallocated space, choose New Partition and use the wizard to (a) define a drive letter, (b) the size of the partition and (c) format the newly created partition.

  For step by step directions: http://support.microsoft.com/kb/309000

  To keep things simple, to stick to "basic disks and volumes" and "primary partitions" (you can have up to 4 per physical disk).

• New hard drive, you had to install OS but laptop has no CD drive.

  I have a new hard drive with no OS and my laptop is not a CD player. I intend to buy the operating system, but I need to know how I can install it once I get it, given my laptop has no CD drive. The operating system can be purchased at the USB format?

  Also, if it's important, I bought my laptop in New Zealand and will buy the operating system to the United States because I now live here. Is how important it?

  Thank you in advance!

  Yes, that's what I say.  Your permit remains valid.

  If there is no problem at all with activation because of a geographic restriction can call the number identified by slui 4 will allow you to resolve, but I don't know that there will be problems.  I know you were already resigned to having to pay for Windows, but this is generally only a problem for some countries and I don't think that Kiwis are included in this group.

  What [precise] version of Windows 7 is identified on the label that has your product key?  If it's normal Home Premium, Pro, Ultimate, then there is nothing more far I helpful to add the link I gave you.

  In the link that I gave you, the procedure for the use of the download MS DVD/USB tool is described.  André illustrations above show you the procedure it will take you through.

  I give you a point of control of this thread to see if you have any questions, leave on a trip in the morning, so will not be able to check again after approximately 8 hours from now [16:08 CEST].

  - - - - - - -

  Andy - do you know if geographical restrictions apply to certificates of New Zealand?

• Upgraded to windows 7 and also a new hard drive

  I have a 2005 HP m7060n Media Center http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00306958 & lang = to & cc = us & taskI... running on XP
  I was looking to upgrade to Windows 7 and also install a new drive.  New readers are shipped with windows 7 already preinstalled and when I change the disks, it will start windows 7.
  How could I then exchange the old files to the new drive?
  What is your solution the best and less expensive?  How do you do this?  Help, please.
  Thank you
  Marco

  I suggest that perform you a clone of the hard drive. Seagate drives and WD offer a free version of the wizard disk.

  Clone the original 200 GB drive to the new drive.  To avoid problems, has chosen a 1.5 or 1 t T drive. Once you have the clone, just install the upgrade on the new drive. All your data will remain intact, and the intact original of 200 GB drive is secure.

  PS > you need a spare sata power and data leads to the clone. Look inside and see what led power is hanging loose. Then I can suggest an adapter or cable. As the DVD is IDE, (not Sata) from what I've read, you will need a Sata data cable also.

• Install the new hard drive, I have no os or backup recovery disks

  I have a HP G62-340US notebook pc-product # XH066UA #ABA, OS is windows 7 64 bit.   The hard drive does not work so I'm relpacing with a new.  I have no os disks and any backup recovery.  When I turn on the laptop there that peripheral black splash screen States 3FO hard drive not found.

  My question is that I don't know what drives I need to order at HP to reformat my laptop.  Again, I have no backup disk or any disks. I lost everything on the laptop. which is ok.  So it's like I'm starting with a blank slate.

  Should I order the kit Media Ststem recovery for consumer notebook, which is a set of 4 discs?   and that's all that I need to install to return to the State wherever it was when I bought it new.  Are there other discs that I need to order or just that?

  Thank you very much for your help.

  Hello

  You just order a SET of recovery disks and this disc set will bring your machine to update 1 than why we call back to factory settings. Please check how to order from the following link:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• Can hard drive failure - I get Lightroom again?

  Hi guys

  My hard drive has totally disappeared and I just got a new installed, the bad news is that I lost my 4 of Lightroom.  I have my serial number, do you know if I can somehow download it again or just get the upgrade to 5 without having to pay for the license of all?  Any advice appreciated

  Thank you

  Kerry

  Or just download 4.4 directly from Adobe Lightroom

  Winner: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5567

  Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5566

• Cannot use windows update in vista Home premium sp2 after cloning and install the new hard drive in the laptop

  32-bit operating system Acer Extensa 5620

  See: http://support.microsoft.com/kb/971058

  How to reset components WU.

• Vista Business to new hard drive without a CD.

  I have a Sony laptop that I bought with Vista Business. The hard drive crashed and I bought and installed a new hard drive. I loaded vista hard disk with an OEM, someone lent me. The problem is that the OEM seems to be the wrong version. What can I do with it if I can use my old key?

  You have the disks for YOUR machines, no borrowed disks.

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner