Satellite Pro M45 overheating after a few updates and installation of new HARD drive

Similar Questions

• Re: Satellite Pro A300 - recovery disk will reinstall Windows OS on the new HARD drive

  Hard drive of my Satellite Pro A300 failed. It has now been replaced. I ordered a recovery disk.
  This will allow me to reinstall Windows Vista OS that is installed initially?

  Also, I get this message "BOOTMGR MISSING". The recovery disc will fix this problem too?
  Thanks in advance!

  > I ordered a recovery disk. This will allow me to reinstall Windows Vista OS that is installed initially?
  Yes. Without a doubt.

  New HARD drive is recognized correctly in the BIOS settings?
  If so avoid any problem.

  Moreover, A300 works perfectly and much better with Win7 32 bit.

• I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I ended the application of uninstalling and reinstalling and that seems to have done the trick. Thanks for the help - it lead me to the right place

• I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Lost audio on Satellite Pro A120-PSAC1E after downloading Windows updates

  Hello

  I lost all sound on my laptop after downloading updates for Microsoft XP from the Windows Update site. I followed the instructions on solving the problems on my laptop and uninstalled Microsoft WINMM WDM Audio compatibility Driver.

  I found afterwards kb 935448 XP update that is supposed to solve the audio problem, but this did not work. Now I want to reinstall the audio compatibility driver to see if it will work now, but I can't find anywhere to download.

  Anyone know where I can find this driver?

  Thank you

  Hello

  This issue has already been discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  As you say that the MS difficulty 935448 helped.

  You want to reinstall the audio driver and don t know where to find this driver?

  I visited the European Toshiba driver page and found the driver of his right.
  Simply choose your laptop download driver form. Satellite Pro-> Pro A120 PSAC1E-> Win XP

• Satellite P10 554 stops after a few minutes and I can not restart

  Hello
  I hope someone can help me with my satellite P10 554
  When I start the laptop, everything is working fine a few minutes. the monitor turns black and the books suddenly stops. I can't restart, when I push the Start button, nothing happens.

  I have to wait about an hour and then I the starts again, but it works for a few minutes and stops again!

  Help me please, cause I need my phone to work!

  Hello

  From your description, I think your device overheat and go down because he cannot be cooled properly. P 10 satellite is older and it's time to clean up. You can't imagine how much dust inside the unit you will find.

  I put t know how are you familiar with this, but if you have no experience don t do it alone.

• After I installed Windows 7 on a new hard drive, my 3 external drives are not get detected.

  I have three external hard drives and they worked perfectly, until I had to renew my hard drive with a new drive with a new installation of windows 7. Now my computer will not reconise any of the readers. they do not show in the Device Manager either. It is said that all the hubs work perfectly. USB flash drives work OK. IM puzzled. All drivers have been updated with the driver update

  Thank you very much

  Original title: external hard drive

  Hello

  You get the error message?

  Method 1: I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you to check if the drives are displayed in disk management. If the drive is available in disk management, and then assign the drive letter.

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot use windows update in vista Home premium sp2 after cloning and install the new hard drive in the laptop

  32-bit operating system Acer Extensa 5620

  See: http://support.microsoft.com/kb/971058

  How to reset components WU.

• After you install Windows XP on a new hard drive, I am unable to activate it.

  Original title: key not turn

  After put xp to new hd key entered went to the Activation Center and they disabled key how can I fix?

  original title: impossible to activate

  Hi DonWebb,

  1. What happens when you try to activate Windows XP? You receive an error message?
  2. Where you successfully able to install Windows XP on the new drive?

  Refer to the article below for more information on activation of Windows XP.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• Satellite L350D-21 problems using new HARD drive recovery recovery disks

  Hello

  I have laptop SATELLITE L350D-212 with windows 7 Home premium OA.
  He started to complain that there is something wrong with the hard drive so I went and bought another hard drive of the same size.

  I created the recovery disk when the computer was purchased and have backup of all the data in an external hard drive.

  After I changed the new hard drive to the laptop and tried to boot from the recovery disc, nothing happens eventhoug I can see it seems to be all Ok with the disc.

  Any ideas on how to get to run to the new hard drive recovery?

  I have the old hard drive attached as external drive via the USB port, but cannot boot from that too. It just stops at a certain point and told to stop.

  Hello

  Usually, the recovery disk must format the new HARD drive but I recommend you to join the new HARD drive as an external device to another computer and format the new HARD drive before trying to recover the laptop.

  Once the HARD drive has been formatted, connect it to the L350D and boot from the recovery disc

  Good luck

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Problems of formatting of the new hard drive in Macbook Pro

  Hello

  My internal hard drive in my MacBook Pro mid 2012 broke down. So I installed a new hard drive a ST1000LM014 of Seagate 1 TB hybrid discs which according to IFIXIT.com must be compatible.

  I then boot the server Apple Macbook and party in disk Utillity to format the hard drive. The hard drive is visible and I'm then in the partition, choose the 1 partition, Mac OS X (journaled) + GUID. But while the partition that I get the error message failed to file system format.

  I tried different options in disk Utillity and I am able to format the disk using FAT or ExFat. But it does not help me to use my mac hard drive.

  Does anyone have any ideas on what to do? And it does not seem like a problem with the functionality of the hard drive?

  Thank you

  You must select the disk of material-name (upper, outermost level descriptor), not Volume name.

• I want to download the first trial pro version, but after a few minutes, it shows me "update failed!"

  Hello

  I have a problem with the download. I want to download first pro demo, but after a few minutes, it shows me "update failed" and writes to me even when I want to update to Lightroom.

  
  Thank you

  Your computer the minimum requirements and have a 64-bit operating system?

  Premiere Pro system requirements for Mac OS and Windows