My imac will beep continuously

Similar Questions

• Alienware X 51 R1 will beep continuously during the beginning upward

  Hello

  Recently, my X 51 R1 suddenly restarted in the middle of a program (windows Explorer), then it beeps continuously during startup and no image appeared on the screen.  I searched on the net for similar cases and discovered that it was perhaps because of the motherboard.  I have used it for 1 year and 8 months now. The only hardware upgrade I did changed the stock GTX 555 OEM to a reference of 660Ti Palit GTX card (December 2013).

  In order to address the issue of beep, I reinstalled my video card, then waited several minutes before turning on the machine (by the way, I put my X 51 on a vertical position).  The same thing happened again.

  After that, I reinstalled my card RAM and video then waited for several minutes.  I turned on the machine while on a horizontal, position and it started without errors.

  What can be the cause of the problem beep? If there is something wrong with my motherboard, it should no longer works, correct?  Is it advantageous to put the X-51 on a horizontal position?

  I hope someone can shed some light on this.  Thanks in advance!

  It could have been a RAM module that has not been properly installed. The position should not make a difference. The main advantage to have in a horizontal position, is that it falls as easily if the surface where it is placed moves.

• Satellite U200 - 10K will beep continuously

  Hallo,

  When I run the satellite U200 - 10K (Vista), from the start, it gives me continuous beep... beepppppp... I can work... I can open applications, but the beep is not going offf. What could be a reason possible to this problem, hardware / software?
  I have not installed new software on this system?

  Aerts

  Hello

  These beeps are rare! Normally, the laptop would beep if the BIOS detects an error. But this beep should not appear constantly and the laptop will not start!

  I can't believe that this issue could be also related to software installed on the laptop.
  In my opinion, the laptop must be verified by a service provider authorized in your country.
  One question; have you tried to recover the laptop with the supplied restore CD?
  This procedure would fix the laptop back to the factory settings. If the tones will not stop, I think that there is something wrong with the hardware.

  But don t worry buddy! The guarantee must be valid and would cover everything!

• Only lights. Will beep 3 times.

  In early 2011 MacBook Pro 13 2.4 ghz i5 320 HARD drive, updated 16 gb ra.

  This a few days ago. Randomly turn off and restart. Became the apple logo and a loading bar get to halfway and then die again, then I have tried all the resets without result. Re and formatted hard drive installed the latest os X.

  IT worked, then it turned off and would not turn on again except to make 3 beeps and LED flashes with her. So I booked into the Genius Bar and it took immediately, he had worked as if by magic. Could not find any problems, so I'm stumped.

  Updated RAM anyway and works very well and today all of a sudden he turned to and now won't load even the apple logo screen just stay empty and will beep 3 times continuously.

  Where do you have the RAM from and what brand please?

• My iMac will not delete mail.

  My iMac will not delete mail. When I try to delete, (move to trash), I get this type of message the message "up to 75% o! surprise sale is here + free delivery"could not be moved to the mailbox"Trash - on My Mac""9346661.emlx"could not copy to 'Messages', because an item with the same name already exists. »

  What is happening and how to fix it?

  Try to delete/empty the trash, try again and then tell me.

• Firefox will not continue to load unless I keep my cursor moving. How can I fix it?

  Firefox will not continue to load any request that I have unless I keep my cursor moving. If I stop my cursor, it stops to load my request until I have move the cursor again. How can I fix it please?

  Hey even once - another user reported that he could solve the problem with a sweep for malware.would you can try with firefox 32 new and run a scan with adwcleaner?

  http://www.bleepingcomputer.com/download/adwcleaner/

• 10.11.3 iMac will not update more far - why?

  10.11.3 iMac will not update more far - why?

  What happens when you try.

  Have you tried to download and install this?

  Download update of OS X El Capitan 10.11.5 Combo

• My iMac will stop automatically after a noise noisy fan for 10 minutes.  How can I solve this problem?

  My IMac will stop automatically after a loud fan noise.  How can I solve this problem?

  Runaway applications can shorten the battery life, affect performance and increase the thermal activity and the fan.

• My iMac will be either reboot or shutdown of the apple desktop icon

  My iMac will be either reboot or shutdown of the apple on the desktop icon. Items saved on the desktop disappear and the menu from the top of the screen disappears, then it is just in this mode for ever more. I then use the switch to stop, which is clearly not the best way to ensure the longtivity of my system.  I use El Capitan 10.11.3 [latest version] I have tried the following but still the same issue.

  1. I ran disk utility, but no hard drive errors appear.
  2. I stop after having disconnected all my other connections (USB components, components lightning etc.), but still no change.

  Before you contact Apple directly, just wondering if anyone else out there he has a similar problem. I had my hard drive 3 TB replaced a few months back, in line with a reminder official apple and this problem started to reign around one month or later.

  See you soon

  Reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  Reset the NVRAM

  How to reset the NVRAM on your Mac - Apple Support

  If it is still not restart or shut down properly

  Try safe mode if your Mac does not end commissioning - Apple Support

  This is not, reinstall OS X from recovery

  How to reinstall OS X on your Mac - Apple Support

  If this is not the case, contact your Apple Store, the FSAA or Apple's Support.

  http://www.Apple.com/support/contact/

• iMac will not fall asleep

  My iMac will not fall asleep, well put me in mode 'sleep' manually or automatically after 10 minutes of sleep. The screen will be disabled for a few seconds up to a minute and then wake up to the top. I have restored the default settings in the energy saver to try to fix it. The problem occurred yesterday, but I've never had this problem before. I did not any changes to settings or my computer until this problem occurred. Any help would be greatly appreciated. I would like to know if anyone has need for more information!

  Sleep - determine why your Mac Wakes Up from sleep

  Sleep - why your Mac can not sleep or stay in mode 'sleep'

  Up wake up Sleep - don't/don't stay dormant

• My IMac will not recognize my LENOVO Tablet

  My iMac will not recognize my LENOVO Tablet

  "Will not recognize" it what, exactly? What you trying to do? Lenovo say when you contacted and reported the problem?

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Add or remove programs? Uninstall it says invalid or data has been corrupted, will not continue.

  Add or remove programs. The program I want to uninstall it is Printmaster 150.00 MB. I tried to uninstall it but uninstall it says invalid or data has been corrupted,

  will not continue. How to get out he computer?

  If you have the original installation media, a method that often works when an uninstall program is corrupt is to reinstall the app and then uninstall it.

  Otherwise, you could try free Revo Uninstaller or see http://ths.gardenweb.com/forums/load/comphelp/msg081415488395.html (unfortunately, the link to the manual uninstall instructions doesn't work; support for Broderbund software has been adopted by Encore.com, the search engine it leaves something to be desired; however, you can ask for help in a forum yet http://forums.encoreusa.com/).

  How to contact Technical Support (it is not clear if all Printmaster versions are still supported; I would try telephone assistance rather than on the web):
  http://forums.encoreusa.com/TM.asp?m=24071&mpage=1&key=%E5%B8%87

  The following (below the line *) comes from a post on the support forums forum moderator yet.  I have not linked to it because earlier in the post, it is suggested to use a registry cleaner in the manual uninstall.  Certainly, I do NOT recommend to use any registry cleaner.

  *************************************************************************************************************
  NOTE: this message does not apply to PrintMaster 2.0 or Print Shop 2.0.

  Broderbund programs, including (but not limited to) print shop, PrintMaster, designer of Scrapbook memories of creation and creator of calendar, are installed in the Program Files folder where most of the software are installed. However, many Broderbund programs will install also files and folders in other places on the hard drive.

  When one of these programs of Broderbund is uninstalled because it is suspected that the installation is corrupt, it's always a good idea to make sure to manually delete all the files and folders stored on the hard drive that are not deleted automatically during an uninstall normal - to ensure that all corruption is removed before the program, is reinstalled.

  Here are the paths of the additional folders where Broderbund software is commonly installed:

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  and

  C:\Documents and Settings\ [your user name] \Local Settings\Application Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\All Users\Broderbund logiciels\Print

  and

  C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  and

  C:\ProgramData\Broderbund logiciels\Print

  **********

  PrintMaster address books can be accessed from and saved to the BOOKS folder that is a subfolder of the folder prints shown below (PrintMaster address books may be accessed from or saved to the Documents folder)

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  WinVista/Win 7:Print and C:\Users\All Users\Broderbund logiciels\Print logiciels\ C:\ProgramData\Broderbund

  (As you can see, when PrintMaster address books are registered under WinVista and Windows 7, they are saved in two files).

  For example, the address for PrintMaster 18 books would be saved in these folders on WinVista or Windows7 computer

  C:\ProgramData\Broderbund Software\Print\PrintMaster\18.0\Books

  C:\Users\All Users\Broderbund Software\Print\PrintMaster\18.0\Books

  To make sure that saved the address books are not deleted during the uninstall process, they must be saved prior to PrintMaster is uninstalled. When these address books are restored, it will be necessary to restore these in the same two folders address books - because an address book will not appear in the file. Open list, if not in the two files.

  Address books print shop can easily be stored in the Documents folder. So, if you have registered your address books in the Documents folder, it is not necessary to save the address book before you uninstall the print shop.

  **********

  Files that control the Project Gallery and the Art Gallery are stored in the folders of ART PROJECTS & which are subfolders of this folder to print

  Windows XP: C:\Documents and Settings\ [your username] \Local Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  For example, ART & for PrintMaster 18 PROJECT files would be in this folder on WinVista or Windows7 computer

  C:\Users\[your-username]\AppData\Local\Broderbund Software\Print\PrintMaster\18.0\PROJECTS

  Because these files can easily become corrupt if the video card driver is out of date or corrupted, the program folder that has been uninstalled (in this case, the folder 18.0) must be removed before the program is re-installed. It is completely safe to delete the folder PrintMaster - because a new facility this 18.0 folder will be performed when PrintMaster is uninstalled.

  If there is only one version of PrintMaster installed on the computer, the PrintMaster folder in this example could also be deleted safely.

  **********

  It is not absolutely necessary to remove the Adbook.exe file that controls the program PrintMaster addressbook. But it's always a good idea to know that this file is installed in this folder

  C:\Program Files\Fichiers Files\Broderbund\UMM

• Login screen loads, then more nothing (will not continue to Windows)

  I have a HP Pavillion laptop and just today I tried to turn it on and it gets to the login screen, I type my password and then... nothing.  He goes to a space where I can see the mouse, but there is nothing to click on the screen.  CTRL-Alt-Del brings up to the window manager of Out-Task-lock switch user-sign and I can use one of these, but that's all.  She will not continue by windows.  Any suggestions?  I've only had the laptop for three months.

  Hello

  Try to use the system restore Windows to return the machine to an earlier point in time when it worked correctly - a complete guide on how to make of this (including a video preview) can be found on the link under the subheading: restore your computer when Windows 8 cannot start normally (it's to halfway down the page).

  http://support.HP.com/us-en/document/c03327545

  Kind regards

  DP - K

• Update will not continue after the confirmation of the loss of personal data

  Hi all

  I tried to update my Xperia X 10 mini for Android version 1.1 to 2.1 using Bridge Sony for Mac, but after checking that I understand that my personal data will be lost, the program will not continue. I can click on the "continue" button as often as I like, but nothing happens.

  Is there someone who can help out me?

  I decided to try to update my phone with computer Windows of my roommate. It worked like a charm. I haven't met any other problem during or after the update, and that's certainly what I would recommend to anyone with similar problems.