HP touchsmart 600: Format and software

Similar Questions

• I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict.

  I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict, why? & How can I fix this problem, thanks Aldo Zapata

  An IP address conflict occurs when two computers on a LAN (local area network) or the Internet were assigned to the same IP. IP conflicts between two computers normally make one or unusable both for network operations.

  Try below methods

  1. for networks where the addresses are fixed (statically assigned) IP, ensure that each local host is configured with a unique IP address.

  2. If your computer has an address assigned dynamically, releasing and renew its IP address can bypass IP address conflicts.

  Run the following commands in the command prompt:

  ipconfig/release

  ipconfig / renew

• HP TouchSmart 600: HP TouchSmart 600 does not power on and flashing lights

  Hello

  Need your expert help! My HP TouchSmart 600 won't turn on. The lighting at the bottom of the screen will flash green. It worked fine the day before. Is it the motherboard? Or a power supply problem?

  Hi @YUL_TechWriter,

  You can go surf part HP

  On the right, select the country

  In the quick search, enter the serial number and it came with the part for this computer list.

• Reinstall the os and software backup extrenal hard drive on newly formatted disks raid o

  I have a gateway dx420s there a HDD 160 GB, I want to do is first of all to buy hard drives of 500 GB to 3 two who will enter the computer and set up in raid 0 stripping data that the computer supports raid 0 or raid 1. first of all I want to save my intire system on an external hard drive. install the two new drives, their formatting, and then configure the raid in the bios. then reinstall the system from the external backup hard drive. My question is - is it possible in this way? It would save a lot of time from having to reinstall the OS and all software.

  Hi DALE_F,

  If you perform a complete PC backup image, you should be able to reinstall this image from backup to the new hard drive.

• Yesterday, I bought a home Permium windows 7 3 reviews software. Material of my computer is flaky and I reinstall windows once a month. If I activate windows after formatting and reinstalling the OS, will be consumed my activation of licenses?

  Yesterday, I bought a home Permium windows 7 3 reviews software. Material of my computer is flaky and I reinstall windows once a month. If I activate windows after formatting and reinstalling the OS, will be consumed my activation of licenses?

  Given that your hardware has a unique identifier captured by the activation process, you should not consume additional licenses whenever you reinstall. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• can\ ' t install windows 8 on my hp touchsmart 600 pc

  I have an HP touchsmart 600-1050 ru PC, serial number [personal information deleted], product number: VS258AA - ACB 7 running windows. I bought an upgrade for windows 8 on October 27, 2012 and so far I can't have it work on my PC. Please tell me what to do to have my windows 8 install

  Hello, Mary:

  Has even thought of field sorry that our computers were made before windows 8. HP doesn't come back so far to develop drivers for Windows 8 for our HP Touchsmart 600-1050 series computers or 300. Our computers have only eight point touch. Windows 8 requires 10 points. Yes, you can install windows 8 but you'll lose touch features but also of many other features as well. Please get Windows 8 on touchsmart here in this forum. You can see how others have installed. What software they were no longer able to use and the features that they have learned to live with out. After reading it then you can decide if you want to take a chance and make the top grade or not. If you do the high-grade remember that your computer won't work properly thereafter. Why is this? Because HP has neither they will never develop drivers for our computers and the third party did not develop them as well. You can see what others had trouble finding. frrw.

• TouchSmart 600-1050: touchsmart 600 1050 installed new drive sata, how can I recover disc windows 7OS home prem w/o OS

  How to recover Windows 7 Home Prem OS, after original hard drive failures. I replaced it with a new HD, but can't boot OS and does it have any disk recovery Touchsmart 600 1050, it was purchased nine walmart 2009 by me, prior to this accident, the cd/dvd-rom failed and never returned.

  The new hard drive should be of equal size or as to what you had and not the format of the AF.

  You will have to order recovery disks, if you live in the USA/Canada, call HP at this number 1-800-334-5144 and see if you can still get a set of recovery disks.  Otherwise the site worldwide: http://welcome.hp.com/country/w1/en/support.html

  If HP does not have the discs, you can get them at the computer the surgeons who have them:

  http://www.computersurgeons.com/p-18105-recovery-kit-gv405av-for-HP-model-number-600-1050.aspx

  Needless to say that you cannot get them on USB key that you must repair your CD/DVD drive to use the recovery discs.

• 600-1050 HP Touchsmart All in: upgrading ram touchsmart 600

  I bought a

  Memory RAM-DDR3-1333 8 GB [2x4gb] Upgrade Kit for

  to upgrade my HP Touchsmart 600-1050 all-in-one.

  However, he had not worked and shows only a black screen after the installation.

  The discription is

  Memory 4GB DDR3 - 1333 PC3 - 10600 Non - ECC Unbuffered 204 pin 1.5V = 9 CL

  Then after, I bought another

  8GB (4GBx2) DDR3 1600 MT/s Kit (PC3 - 12800) CL11 SODIMM Notebook Memory Modules CT2KIT51264BF160B / CT2CP51264BF160B to amaozn.com

  It has the same problem.

  Those who are not compitable with my computer?

  If so, let me know a compitable memory set for upgrade.

  Yes, that would be true, but that model is an all-in-one computer, it is not flexible for the replacement of the Board of Directors, as a regular desktop would be. You probably only have the option of a Board.

• TouchSmart 600: Low battery for the keyboard will not disappear

  After upgrade to windows 10 in PC all-in-one TouchSmart 600; whenever the PC wakes up from sleep mode, low battery for the keyboard warning message appears despite the fact that the batteries are new.   The message 'form' has no way of closing other that "remind me later".

  Solution: new keyboard, Logitech > bought.  Must say that I was so tired of the current fake e-mail I just replaced my HP keyboard and mouse with another third-party.  Thanks for all those who have responded or tried to help.

• Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Suzanne,

  With the help of a video-to-USB device like the EVGA UV plus + 19 will not damage your computer or HDTV. The EVGA UV + 19 more is an active device and is not just a passive cable. To the best of my knowledge, there is no passive cable which will convert the USB ports in HDMI ports.

  Frank

• My desktop HP Touchsmart 600 computer: My HP Touchsmart 600

  Desktop HP Touchsmart 600 has a about 5 inches square dead spot on the top left corner of the screen.  Is this a problem that can be easily repaired?  If so, can it be repaired locally?

  Thank you...

  Bruce

  @ButchBob, welcome to the forum.

  If your computer is no longer under warranty, I suggest you find a computer repair shop known locally to see what they have to say.  It shouldn't be too difficult for them to fix it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP TouchSmart 600: External Toshiba USB 3.0 drive not recognized on HP Touchsmart

  I have a desktop HP Touchsmart 600, and I bought a 1 to Toshiba external USB 3.0 drive and when it plug to the USB port, it does not, even tried the other port and restarted, but does not yet recognize, I tried to reload the USB Chipset, but no cigar. I am able to use it on my Sony laptop. I would be grateful for any help or suggestion. Thank you people.

  Hi @StevieB1,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the external drive not being seen. I'll be happy to help you.

  Please, try the steps in Troubleshooting connections USB (Windows 7).

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Re: Satellite A300D-11 t - how to install Windows and software provided?

  Hello
  I have a Toshiba Satellite A300D-11 t (model: PSAK0E-00700DGE.) Due to the mistake of hard drive, hard drive has been formatted and I lost my OS. When I bought it two years ago, the laptop came with Windows Visa and other software. But I don't have any software CD this time except the mannual.

  Please help me how can I have my Visa settings or factory of origin.
  Thank you
  Ben

  Hi Ben,

  The problem is that you must create this disk with Windows and all the drivers/tools yourself if it of not given with the computer. This can be done with the preinstalled Toshiba Recovery Media Creator who creates the Toshiba recovery disc. This disc contains a picture to factory settings (Windows with all the drivers and tools) and can be used to restore the factory settings every time.
  So you need this disc to install Vista with the supplied software.

  In any case, now it s too late and you need to order such a drive of Toshiba directly but it s not for free:
  https://backupmedia.Toshiba.EU/landing.aspx

  Of course, you can install Windows on a normal disc of Microsoft, but then you must install all the drivers and tools yourself so recovery disk is the easiest way and pre-tested by Toshiba. ;)

• RTM of Windows 8 installation Fail on Touchsmart 600-(1050)

  Has anyone else had much luck RTM of Windows 8 on a Touchsmart 600 installation? My installation starts ok, but after the first reset it everything is there with the logo and the whirlpool circulating. The boot record, I checked and I have a suspicion that he doesn't get Windows to start after the reset.
  
  Anyone else facing this?

  Just for everyone to know that I finally managed to fix it. It appeared that my question was a known Windows 8 Preview version that Microsoft has released a fix for (http://support.microsoft.com/kb/2727113). Apparently, there's a bug which can cause freezing symptoms I was see and by running the command

  bcdedit/set disabledynamictick no

  due to the gel to stop. It seems that the update has been released with RTM of Windows 8, so it does not seem to have worked at least the Touchsmart 600-1050. Many other people are reporting that it didn't work either, but as long as the above command will stop the gel I'm happy.

  My installation is going well now, work all, all happy. The only thing I needed to update was the touch screen 2.6.9.0 to 2.6.10.0 pilot who has really improved stability. That and the driver for the buttons on the side of the case.

  Happy days!

• HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI

  HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI. I have connected the same cable to your laptop and it connects, suggesting that there is a problem with the CV. The TouchSmart has a GeForce GT230 graphics controlled by the control panel NVIDIAnView. By using the system control panel and the control panel NVIDIAnView, I have not been able to locate the Samsung monitor.

  I made restarts it etc. also without success. Does anyone have a suggestion that I could follow.

  Hello

  It is a machine CTO, but have many models of the Touchsmart 600 HIMI IN port series, not OUT port so you can't connect to a TV using HDMI in order to get the picture on the TV.

  

  Kind regards.