my installation cd does not work.

Similar Questions

• Cannot activate XP Repair, installation ID does not work on the phone

  Hi all, I recently had to run a repair of Windows XP Edition family due to a driver issue and finally managed to return to the start screen and try to log in, but it wont let me connect you without activation (I suppose some confusion because it is installed on my computer for more than 30 days, but the repair made me have to reactivate).  So, I tried to start safe mode and was able to connect here in the version without networking.  Unfortunately, when I try to activate by phone (no network connection, the default ethernet driver was the cause of all this to start), the automated thing will not take the installation ID that is displayed in the activation page.  I know that I have a valid product key and the original disk, as I used it a year ago to re - install on a new hard drive, but I have no way to actually enter the product key!

  Assumptions on how I can try to work around this problem for long enough to activate online (I use a USB wireless, but the computer must be started in order to establish the connection), or why the crazy long installation ID does not work?

  Thank you very much

  Eric

  Hi EWool,

  • Have you tried to activate the normal mode?

  You cannot activate Windows XP safe mode and most of the drivers does not work in safe mode.

  I suggest that you contact the support of Microsoft telephone activation to reactivate Windows XP.

  How to find a phone number for a Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929

• Lightroom6 installation code does not work

  I'm tired, the installation code does not work.

  After 10 days, there is no way to be supported by Adobe, but they took my money.

  I'll block the payment and never again buy Lightroom.

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• tried to install creative cloud but the installation file does not work.

  tried to install creative cloud but the installation file does not work.

  the installation window is suddenly turned off.

  What can I do?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Windows, download itunes says windows Installer updates does not work

  I too manage download of updates, get the errors for microsoft office 2007.  I tried to download the utility for him but can't even download that.  Says windows setup does not work.  I ran malwarebyes but still does not load them.  Can I reload windows vista without losing everything?

  Hi Jkfitz2,
   
  Welcome to the Microsoft Answers Forum community!

  first of all, I suggest you to re-register the windows installer. To do this, please follow the steps below:

  Step 1:
  
  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
   
  1. in the menu 'Start', click on ' execute:.»
  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
  3. in the menu 'Start', click 'run '.
  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  For more information, please see the link below:
  http://support.Microsoft.com/kb/555175

  Step 2:

  Also I suggest you to start the Windows Installer service.

  Steps to start the Windows Installer service:

  1. start, type Services.msc and press ENTER
  2. double-click click Windows Installer
  3. the value of the Windows Installer Manual startup type
  4. Click Start to start the service. Note the error message, if any.
  5. click on OK.
   
  If the steps above does not you can download the latest version of the windows package install autonomous from the link below.
  http://www.Microsoft.com/DownLoads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Also I suggest to restore the windows components update, try to fix it.
  Please see the link below to fix:
  http://support.Microsoft.com/kb/971058

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer                                                              
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• Xmarks is functional? It didn't work for a week and the installation wizard does not work.

  The last time worked Xmarks was on 25 October. I am connected correctly and it tries to synchronize, but never finished. Even the Xmarks Setup Wizard does not work. It is a very useful addon in the past one I hope he'll return to work.

  I had this problem too. I'm running Firefox 25.0 and used Xmarks 4.2.1. Sync would not end. I downloaded Xmarks 4.2.3 from Xmarks web site (not the site of Mozilla Add-ons that apparently has 4.2.1) and now everything looks OK.

  Mark

• Have key but the installation media does not work

  OS came with the laptop, now the recovery disk does not work so I just the key but not the medium to install it. Please tell me what to do? Really need my laptop!

  Contact the vendor for a replacement drive.

  Why do you think you need to re - install Windows?

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• 14 elements installs but does not work

  I installed Photoshop Elements! 4 out of 10 Windows and it does not work. I received this message:

  • C:\Windows\System 32\MCVCP120.dll is not designed to run on Windows, or there is an error. 0xc000012f error status

  He suggested I have reinstall which I did and got the same message. Thinking that this might be a problem of Windows 10 I went back to 8.1 for Windows, but I get the same message. I tried installing from the CD and download but still get the same message.

  Support chat Adobe has yet been able to solve this problem.
  

  Please check:msvcp120.dll error in Windows 10

• Flash Player installs but does not work

  I've recently upgraded to Flash 11.6.602.171. I am running Windows 7 x 64 and IE 10 (32-bit edition). Installation said successefully Flash installed, but embedded Flash content does not appear on the web pages. All I see is a blank section where should appear the flash content. Still works fine before, it started just after an upgrade to the latest version. Shockwave Flash object is enabled in Internet Explorer. Go to Flash in my control panel shows that the latest version activex controls are installed. Here's what I've tried;

  • Through all installation and uninstall procedures set out on the Adobe web site. No differerence.
  • I uninstalled Flash and checked that it is uninstalled as described on the web page of Adobe Version 'find' according to the
  • Reinstall Flash and it says "Flash installed successfully."
  • Go to the page to find the Version and the Flash object is not displayed. When the page is loaded a gray area appears, then disappears, and no flash object shows. Do right click makes up the menu of the flash objects and I can access the Flash drive configuration manager, but can not display flash content.
  • I uninstalled and reinstalled 3 times and get the same results.
  • Videos YouTube work fine. Only embedded objects do not work.

  Another thing I noticed is that Silverlight video does not show as well. Move the mouse around section of the white screen where video Silverlight should be, the mouse pointer changes to the finger and I click, playback of video with audio but no video. I also noticed that aero live preview on my taskbar now shows white screens with icons instead of a real overview of the windows. I think this may be a video display problem, but have no idea as to how to proceed.

  Any help is greatly appreciated

  Issue is resolved for now. By reading another post, I came across this;

  http://forums.Adobe.com/message/5112973

  I posted my find there. The bottom line is by uninstalling Windows update kb2670838, all my problems disappeared. Feel like lately I spend hours and hours the weekend to try to resolve the problems as Microsoft Updates create the Wednesday and Thursday of the previous week. Thank you Microsoft!

  Mike

• CS5 installs but does not work

  I tried to install CS5 Extended on a Win XP SP3 computer that already has an installed CS3 upgrade.  I like to keep the CS3 until CS5 is working properly, that it is not doing.  Here is what happened:

  -CS5 seems to install safely; I put it in its own folder, separate from the CS3.  There is no error message during the installation.

  -After restart, I noticed that no icons were installed (is this normal?) while CS5 is on START > programs.

  -CS5 does not start when you click on CS5 in the start menu > list of programs, or as a file in MS Explorer.  Bridge CS5 fact run, but you cannot access CS5 from there either.

  - And my old Bridge CS3 had now CS5 as it is by default on 'Open with', rather than CS3 (is there a way to control the selection?).  CS5 will not charge nor of Bridge CS3.

  I tried to install CS5 twice, the second time after uninstall and run "Cleanup for CS5.  No luck, I got the same problems!

  I removed the CS5 on my computer so that I can use my old CS3.

  Can someone help me get the CS5 running?

  CS5 Extended is Photoshop. This forum is for the specific problem now.

  Please post in the Photoshop forum.

  Bob

• Office home and Student 2007 installs but does not work

  SST installed on my Windows Vista laptop... I can see it in the menu programs, but it won't work.  It does not show as a default choice for programs or the other.  Help!

  See the Microsoft article below which talks about the same.

  You receive a "Microsoft has not been installed for the current user" message when you start an Office XP program or start the Maintenance of Microsoft Office mode
  http://support.Microsoft.com/kb/298022

  An error "The Application must be installed" message when you start Office programs
  http://support.Microsoft.com/kb/302846
   
  If that does not solve the problem, then post your request in the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  If this post can help solve your problem, please click the mark as answer check on this page it helps people who need quick access to answers THANKS AND GOOD LUCK

• Creative update of cloud downloads, installs, but does not work?

  Whenever I start my computer (Mac, latest OS), I see that there are 9 available for download for Adobe CC updates. Whenever I update a single application or all, it downloads, installs but nothing is done. When getting information about apps. everything still shows as 12.0 as if it has not been updated. When I restart the computer once again, I get the message that there are 9 updates available for download. It is a never ending cycle and no matter how many times I 'Update all', will continue to download, install, but nothing really is set to date.

  I have set the permissions of the drive, remove the preferences and allowed read/write access to all files of Adobe and it still does not.

  
  Thank you.

  Hi Motionlab_AU,

  Please navigate to ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it to 1.0.old. Launch desktop CC and try to update again. (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html)

  Kind regards

  Romit Sinha

• How do we install updates when the installation program does not work

  Whenever I try to install the updates, I get to the page 'Please read the license terms' and 'Next' is not available.

  I've been in contact with Microsoft about this before, and an engineer has spent half of the day sorting - and it is still the same!

  Help, please!

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• WAMP Server installs but does not work on Windows 7 Professional. Why?

  To prepare my computer for Web construction and necessary for installing Wamp Server.  Installed, it does not run.  the office bar icon don't change from pink to green.

  Since your message clearly has nothing to do with your comments on the web site of Microsoft Answers, I left it the Feedback forum on the forum of "Programs" of Windows 7.

  If you have problems with wamp, you do not ask the wamp forums would be more productive?  http://Forum.wampserver.com/list.php?2