my internet card does not work__

Similar Questions

• Option Internet PCI card does not work

  Last week I had format my Satellite and I had installed Windows 7, 64-bit, but now the Internet PCI card does not work.

  It says that my Radio power is off, even if in reality is not.

  I had the same card for Windows 7 Version, but unfortunately Internet update for nothing.

  Please can you help me.

  Thanks in advance

  Can you please tell us which model of laptop you have exactly?

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Graphics card does not work on the Satellite L850 PSKFWA

  Hello

  I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
  I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

  I haven't noticed any problem with the graphics.
  It may be a Radeon problem, but what I have on my system, which was installed at the factory.

  Thanks for everything back
  Hetty

  + The message was edited: model nr. Add the object +.

  Can you please tell us once more what model of laptop you have exactly?
  Are you using the original Win8 preinstalled?

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

  Everyone knows this problem.

  I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

  Any ideas out there?

  Does anyone have this problem?

  I reinstalled the Yamaha drive a couple of times and always the same: no sound?

  I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

• P20-552: 2 GB SD card does not work.

  I have a P20-552 (PSP26E-025E9-S4), which is about 18 months old. I recently bought a digital camera (IxUS 750) barrel with a 2 GB Sandisk Ultra II SD card and the combination does not work well. Although I can transfer images from the camera to my Toshiba laptop with a USB cable, sometimes, I would use the SD slot on the laptop, but there seems to be a problem: seconds after pressing home the SD card in the slot, I get the message "disk is not formatted - do you want to format it now?". I said OK but then I get the message "cannot be formatted disk in drive E".

  The card continues to work perfectly fine in my camera and on my iPaq Pocket PC. In the Toshiba SD card works quite happy with Sandisk card of 256 MB SD, which is usually in my PDA.

  Anyone has an idea why the 2 GB card does not work in the Toshiba? It's updating a driver - I watch the other day but I couldn't find anything that seemed appropriate, but I might well have forgotten something...

  I'm running XP Home Edition (SP2) and are automatic updates IT. I have Norton Virus and Zone Alarm running and have no problems with other software/applications - at least, no problem, as someone suggested to suck my laptop overheating a few weeks ago ;-)

  Thank you, Brian.

  It seems that the unit doesn t support this card.
  See your user manual. You will find an information that this device supports only the following SD card formats: Mo 8/16/32/64/128/256 and 512

  According to this document, the 2 GB are high.

• Sound card does not work after upgrade to XP Pro

  I need help - Microsoft participated three times without result. After that I updated to XP pro that my SigmaTel C Major sound card does not work. Done all the usual uninstall the driver, update driver etc. No results. When I go into the properties of audio devices, midi and mixer IE driver I see a status message: active but device not started

  Any ideas on how to solve it is greatly appreciated.

  Hello

  Sorry but I have no explanation for this. I can recommend you to remove the sound card in Device Manager, then restart the unit. After reboot, the sound card must be recognized and installed properly.

  It will be interesting to know what model of laptop you have.

• HP2310i: New (ASUS GEForce GTX 750Ti) graphics card does not not on HP 2310i

  Hi all

  Help, please! I can't get my new graphix card to work with my HP 2310i :-(

  Basic unit of HP: Pavilion

  Model: p6320uk i5 CPU 3 .2GHz

  RAM: 6 GB

  Screen: HP 2310i

  Windows: 7 (64-bit)

  Card: ASUS GEForce GTX 750Ti

  I swapped the old card and put in the new (I know what I'm doing with this as much before). Connect the plug of the correct video adapter for the graphics card is: DVD-D/VGA. Everything turns on and all I get is...

  DVI: NO SIGNAL

  VGA: NO SIGNAL

  I can't add the new GEForce drivers from the disk because it needs the map in situ.

  What Miss me? What can I do? I am doing something stupid?

  Help! :-D

  Thanks Jowler

  Jowler, welcome to the forum.

  You have shown two different models in your thread.  I used the p6329uk.  The reason that the video card does not work is that it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on January 15, 2010.  Therefore, the GTX 750ti will not work.  The last series of video cards that does not need UEFI was 640 gt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Hybrid Analog/DVB-T card does not work - Qosmio F50

  Hybrid Analog/DVB-T card does not (Windows Vista Home Premium).

  Channel zero came after scanning with Media Center. Sent to the hardware engineers.
  Tha card has been tested in a "fresh load of Windows" and worked well.

  It was suggested to clean and reload Windows.
  I made and tested with and without having to download Service Pack 1. Still does not work. Driver has also been updated (2.3.3.21).

  Any suggestions?

  Thank you

  Hello

  First of all, you should test the portable DVB - T with Toshiba s card preinstalled Vista.
  Everything has been set up and should work fine

  I think that it s not Analog/DVB-T Hybrid card problem.

  Maybe the DVB - T signal is too weak and therefore you do not find the TV channels using this card.

  In my country and the region, the DVB - T signal is really weak and I need a DVB - T antenna to receive the signal and the channels!

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Satellite L20-264: wireless Internet access does not work

  I have a US Robotics router and a wireless laptop, I followed the instructions exactly in the manual to set up but the internet still does not work wireless but it works through the ethernet connection.

  Can someone help me please.
  If it helps my laptop model is 264 L20
  Thank you

  It is a pity that you describe your problem WLAN so little time and we don t know what you tried exactly and what results are there.

  For properly WLAN use two hardware components must be configured right - the router itself and laptop. It will be interesting to know on what are the instructions you wrote.

  Are you sure that your router is configured correctly?

• Satellite A200-1VM - SD card does not work

  SD card does not start.
  I already have SP1 and in Device Manager SD card appears with "!" when a card is inserted and is not, when it's empty.
  When I insert a card inside it says does not start code 10 but I see the led blink whenever I put a card inside.

  Can anyone help?

  Error code 10 said that the SD card driver was not installed correctly or device couldn t load the driver.

  In any case, you should definitely try to reinstall the driver from SD card.
  First go to Device Manager and uninstall the old drivers.
  Then install the driver again, downloaded from the page of European driver of Toshiba.

  Finally, restart the laptop and try again!

  Good luck

• Error message - Toshiba flash cards does not react

  On the top of my screen, I see a message that toshiba flash cards does not react. Where can I change this? I can't close the other windows because this message gets in the way.

  Tamara

  Hello

  Utility of Toshiba Flash Cards control the Fn keys.
  You should check and if necessary should deactivate and activate the card Programs\Toshiba\Flash card utility Flash

  If this does not help, reinstall again the Support of Flash memory card utility.

  Welcome them

• Satellite M200 Flash card does not work?

  My new laptop Toshiba M200 (works on Vista) continues to display an error message that my Flash card does not work and that the system is looking for solutions.

  Other threads in this forum, I understand it could be a driver problem, but there seems to be no suitable driver available for download for my M200 model.

  Who can help me?

  Thank you

  Hello

  When you reference the Flash card, I assume you mean the utility toshiba Flash Cards. in this case, I would say that you reinstall (i.e., uninstall and then reinstall) relevant Toshiba Value added Package for your laptop model. to locate the relevant Toshiba VAP, visit your regional toshiba driver. This should solve your problem, such as cards Flash requires the installation of files for your Fn + F keys (for example by pressing Fn + F6/F7 fades and lights up the screen), so I think that Vista is looking for solutions as the Fn keys could be involved. After installation, you can disable the startup Flash cards when the computer starts up, but do not uninstall the toshiba VAP.

  This should help your question

  concerning