My iPhone 6 s write always full memory

Similar Questions

• iPhone 6 + iOS 9.2.1 always full memory

  Hi, I'm very frustrating now. My iPhone6 + 16 GB with iOS 9.2.1 update is running out of memory. Even after I deleted all photo, video and all applications.

  When I looked in the storage and manage the configuration, storage showed even less than the quotient of the ability of my iPhone. But in the available space is 0.

  I restarted my iPhone, reset all the settings, but it does not work.

  When I deleted an apps will show there is an abundance of space. But 5 minutes later, he turns to 0. It of like any virus or bugs out of my space

  really disappointed with price $ 800 but the quality is not good. Please help me

  Do you by chance have WhatsApp? There are a multitude of reports of this app consumes space on your phone

  On the other - connect the phone to iTunes

  Go to summary

  See the color bar at the bottom and put a picture of this

• I have iPhone 5s, it shows always full of storage?

  I have iPhone 5s, it always shows complete storage, how can manage us? is there something wrong system? or default with virous?

  Note Please

  You use iTunes?

  If you-

  Connect the phone to iTunes

  Go to the table of contents on the left

  Scroll to the bar of color at the end and see what fits on the phone

  You can also

  Settings - general - storage management - see which applications are too much space

  That post and we will help if you need assistance

• BSOD an attempt was made to write to readonly memory

  My computer went nuts and crashed last night. I have no idea what the issue is, I get error blue screen 'attempt was made to write to readonly memory'... sometimes. My anti-virus 'blocked a threat' a few minutes before the accident, so I don't know if it could be the associated virus. The computer hangs at each attempt to start it, System Restore and startup repair were not helpful either. Said Startup Repair could not fix the problem, and the system restore said he succeeded... but always crashing. I was able to do start in safe mode only (networking) off and recover the files of emptying and sys info

  But I have no idea what to do with this information.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessa

  I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessage, but when I click in the conversation, no text box for me to write as he does with everyone. It's driving me crazy. How should I do? The two contacts are in my address book and identified on my computer but I can't their message from my computer and have to keep spending on my phone to text their return. Their new messages are always also highlighted on my computer. In the photo I've included, you can see there is no text box for the text of the group with "Franny, dad."

  

  Thanks for any help!

  What happens if you start a new conversation with Franny & Dad from the IOW computer do not try to "catch" the conversation

  Click on new message and put their names in there

  If this does not work - remove the wire from the Mac and try again

• Always full of storage

  I have a problem with my storage is always full even though I deleted almost all applications including whatsapp and also reset the settings, nothing has worked with me

  Probably, you have an App or a corrupt system and may have to do a system restore to fix. But first try the steps here:

  http://osxdaily.com/2013/07/24/remove-other-data-storage-iPhone-iPad/

  System Restore: first back up your device via iTunes. Import your photos on your computer, and then copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup.

  https://support.Apple.com/en-us/HT201252

• Appointments of Braehead Genius always full Bar?

  The closest UK bar (Braehead in Glasgow) appointments engineering seem to be always full. Does anyone know what time of the day, the next day appointments open? Apple support me 08:00, but I tried and they were full already!

  Apparently nominations open at midnight for a week in advance. But I found it much easier to simply turn up half an hour before the opening and the queue time. Sorted!

• iPhone WiFi hotspot not always recognized

  Sometimes, my MacBook Air recognizes my iPhone as a hotspot 5SE, sometimes he recognizes it, then rejects it, and sometimes it doesn't recognize at all.

  It seems that I have to toggle the settings > cellular > Personal Hotspot several times before I can get my MacBook Air (10.10.5) to recognize my iPhone, keep the connection.

  Hello Mel Magree,.
  Thank you for using communities of Apple Support.

  If I understand your message your iPhone 5s is not always recognised by MacBook Air. I know how it is important for you to be able to use the hotspot on your iPhone 5s feature. In this situation I recommend to use the steps in the following article:

  Get help with Personal Hotspot in iOS

  Best regards.

• Yahoo password email changed computer but the iPhone and iPad can always GET mails without updating the password

  Yahoo password email changed computer but the iPhone and iPad can always GET mails without updating the password...
  Normally, it should show as 'could not load the mail' or 'impossible to download the mail' or 'Please verify your password... "
  It's really wired.

  You are probably using IMAP

  Update contained in one place - it synchronizes across devices - all as is your email

  With POP accounts, you'd see what shows your question

  Instructions on how do to vs in IMAP POP3 - IMAP

• MacBook Pro (2013) turns off unexpectedly, full memory

  My macbook pro (2013) Retina has full memory. I want to delete stuff to free up my storage but I can't because there a risk of stuck and close. When he tries to turn it on it shows the apple with the loading bar logo and comes only about 1/4 of the way loaded. It then shows a black screen with a circle with a line through it. Can someone please?

  Thank you!

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  When in SafeMode (if successful) try to remove stuff

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Some tags are not recognized at all (mp3/ogg, always full albums)

  Hello!

  I encountered a strange problem. My rocket recognizes not all my files tags. — about 1/3 of my songs appear as 'unknown' as 'unknown '. My question is, someone bumped into what whether similar? I tried searching this forum but can't find anything similar.

  It's a little weird, like:

  • They are always full albums that are not recognized (i.e. newer than a part of an album).
  • I have not found a common application for the albums, tags are not recognized;
  • Some of them are MP3 (id3v2.4 I presume), some are OGG,.
  • some (most) is torn apart by myself CD, some are not.
  • I have them checked (of course) on the computer and all my software recognizes the tags.

  For example, 4 8 Weather Report albums are "unknown" - and one of them is OGG, MP3 3 and 4 which ARE recognized, 3 are OGG and 1 is MP3. I have my albums organized in the manner of MUSIC/artist/Album folders / *. [mp3/ogg] on the "rocket".

  All have been (re) marked with easytag, in fact, that I have recently relabelled/checked the tags of my entire collection with easytag (to ensure that it is usable on the "rocket"). There must be something wrong with my tags. I tried to format the device (in the menu), reset the database by deleting the device, but it does not... help on the updating of the database that is the same files that do not have recognized, however.

  Any suggestions or ideas?

  Thanks for your help!

  Hi again!

  And, thanks to the advice of sansafix, this problem is now solved!

  It seems that id3v2.4 was the culprit - my files under 2.3 relabeling them does the job. In addition, my OGG files were (and still are) the ID3 tag, unlike what I thought. But now they are 2.3 work also.

  Don't know why some of the tags did work, however, even though they were all 2.4 - but their relabelling as 2.3 made it all work in any case. Also, in easytag, I can't seem to be able to prevent OGG files of the ID3 tag, I can only it stop him marking with ID3 alltogether (which is not nice, because I have MP3 and OGG). There is an option to avoid tagging FLAC with ID, however. Maybe I should post a feature request for the guys of easytag, this should be easy to implement...

  I have my tags to format UTF-16 also and did not encounter any problems (yet - my rocket is still so new I don't have time to see all the songs with characters & foreign languages).

  But, in any case, thanks again! Very useful forum, it is indeed.

• Can not copy the database of res folder and write to the memory card

  I developed a small application using blackberry jde 7.0. I want to copy the database (.db) of res folder and write to the memory card. When I run in the Simulator, it throws exception "FileNotFound". But the file is located in the res folder.

  Help me guys...

  Here is the code

   copyFile("/Demo.db","file:///SDCard/Databases/Demo.db");
  

  //Copy to Memory card
  public void copyFile(String srFile, String dtFile)
  {
  try
  {
  FileConnection fconn;
  fconn = (FileConnection) Connector.open(dtFile,Connector.READ_WRITE);
  //if(!fconn.exists()) // if file does not exists , create a new one
  // {
  // fconn.create();
  // }
  InputStream is = (InputStream)getClass().getResourceAsStream(srFile);
  System.out.println("read" + String.valueOf(is.available()));
  OutputStream os =fconn.openOutputStream();
  byte[] buf = new byte[is.available()];
  int len;
  while ((len = is.read(buf)) > 0)
  {
  os.write(buf, 0, len);
  }
  is.close();
  os.close();
  }
  catch(IOException e)
  {
  System.out.println("Exception"+e.getMessage());
  }
  }
  

  The exception is

  File not found

  «When I run in the Simulator he throws exception "FileNotFound".»

  Which line is the rise of this?

  You might find the code in the sample application SQLiteDemo, which does almost the same thing, useful in the study to determine what went wrong.

• Always full screen Web site

  can someone explain to me how do I create a Web site that is always full screen on pc browsers?

  I came across a number of methods, for example-

  http://StackOverflow.com/questions/17478661/Adobe-Muse-how-to-style-body-to-100-width

  The simplest method would be I think.

  Go to 'Page Properties' select 'Metadata' the Properties Page and add the following code to the HTML format for area -.

  Remember, though, that everything you do with your page, it's the measurement in pixels based, means that it will not scale-to-fit the size of the page. However if you create your own css file and put this in the head content, you can replace the many properties and make your Adaptive layout. This would require you to know if the css, and if you don't know enough css to do this, my preference would be to create your page layout in Dreamweaver anyway.

• How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Hello

  How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Thank you

  Jay.

  Hi if your task is running an informatica mapping you can set your DAC task to run the full mapping for incremental and full loads, so tab task just point to the mapping.

  Hope that helps.

  Thank you

• My memory of the iphone is always full

  my iphone keeps showing memory full message. Most of the time I am unable to take pictures or videos.

  I contacted apple to many times, but they never understood what the problem is.

  I even got a new iphone but still facing same problems.

  I did a reset several times and returned the unit to the factory settings.

  at the beginning I used the backup restore from Itunes, then Icloud and still problem is not going away.

  so I did a reset and deleted everything and doesn't not restore from a backup, but after a few days the memory gets again.

  at the first I get about 4 GB or more of free space then it tends to zero.

  The only thing that I guess this backup uses icloud is whatsapp - very important for me I can't remove it.

  flactuations i noticed in the available memory. FB and snapchat sometimes eats storage.

  What do you think I should do now? Other than to do a restore full every week or almost...

  It's frustrating and Im thinking to move towards samsung

  What memory size do you have? You never mentioned.