My iPhone is set up to autoforward SMS messages to another iPhone. The first iPhone must be activated so that the SMS messages automatically to the front?
I have a working iPhone which is implemented through iMessage auto before SMS to my personal iPhone. If my work phone is not activated SMS messages don't not autoforward. Must the phone working be enabled so that SMS autoforward work?
Yes, in any kind of call or the transfer of text, each device in the relay channel must be turned on and connected to the network.
Tags: iPhone
Similar Questions
-
After my reboot of the iPhone, the iPhone must be re enabled and why?
After my reboot of the iPhone, the iPhone must be re enabled and why? And the iPhone had no problem in the past. I need help!
You have a SIM card installed? If not, install one. Then try to activate it.
-
iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone. Male/female connection not relieve tight. Advice\help would be appreciated.
Try a different cable - preferably a certified one MFI
If this does not work
Please take a genius appointment at an Apple Store, or select another authorized service provider.
-
facing the front camera is installed on the iPhone 6
Hello! Please check this. I am aware that there are similar issues with a solution here, but I'm here for a slightly different reason.
Now I can´t find the email to talk to an official apple which is what I need. I need a to confirm that the movement of the front facing camera is a known problem due to poor/low quality glue and goes without having the phone in a drop of water or any form of damage. This happened to me, I have never dropped my iPhone, but through the daily use (usually, no extreme movement or whatever it is) the device is passed so that the gray "half moon" covers half of the hole for the camera. So naturally I talked to the place where I bought it, it was sent to repair (ish, they never repair, they send you just a new) where we discovered that the iPhone was slightly bent. I was shocked, that I never did anything that could cause such damage, but realized that somehow he had to me. Accordingly, any warranty has been deleted, then they won´t looking at the camera because the phone is folded. I explained that the issue of the camera is well known and he did not as a result of the bending. They do not believe me, and that's why I need a Apple to write me an email saying that the problem is known and that it does not come as a result of the bending. It is the only way that I can return the guarantee for the cameras of sake. The email will be shown the guy from the store that takes care of this. I read higher than (some) iPhones suffers from a bad glue and a half moon appears, but can't find the source. Thanks for any help!
Sincerely
Oscar
While it is true that there are those who knew their glass/screen covering part of their front facing camera, this question can also be reproduced with force by bending from your iPhone. I would have meant you for nothing to happen, of course, but as it is now, there is no way to verify what happened before the others, as the only documentation they have of this is an afterthought. The issue of bending to the iPhone, whose screen is fixed to, and the movement of the screen of his normal place which covered now your camera, are present.
That aside, however, if you already had Apple inspect this device as it looks like you have, you will need to pursue any other opportunities on this through the same avenue. Contact Apple for support and service - Apple Support
Wish I had better news for you
-
I uninstalled Adobe Flash and then tried to download. I get a message from Adobe saying 'Failed to initialize' is there a setting on Mozilla, I need to change to allow the plug in?
Why don't you use Firefox 7?
-
The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...
Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls
-
I recently bought an iPhone 6s I have loaded with my iTunes support information (old phone an iPhone 5). Problem is that I now have a replica on both phones I have an Apple ID - how to change the apple on the new ID
What do you mean by 'repetition '?
You use two phones? Or did you give the old phone to someone else? If you use two phones, one ID on both Apple is probably than most people. Before you give or sell an iOS device, you must sign in iCloud in settings > iCloud and restore the device as good as new.
-
I am so tired of this bluetooth problem on my iPhone 6. I am updated to iOS 9.3. Anything I pair with my iPhone must be within 6 "of the phone. What should I do?
looks more like a hardware delivers then one software
-
Can you lock my iphone without finding active my iphone?
Please I need your help. My iphone was stolen yesterday. I logined as my icloud but I does not enable find my iphone. I have tried everything I can to find my iphone, but everything is hopeless. My iphone is very important to me. Have you even help me to find my iphone or block my iphone. ? I really really need your help. My name is Nguyen Ngoc Thai and I'm Vietnamese
# You can not remotely lock or locate the phone without finding buy iPhone activated. That's why Apple invites you to do when the phone is activated. Other users in the user forum can do either (and neither does Apple).
-
MI iphone 6s esta blocked is that not me acuerdo of the clave of acceso al Teléfono, lo trate reiniciar en itunes pero no e could
The password lock screen, the restriction code and your Apple ID password can be very different. If she asks you a password, you should be able to use the options described in the lower part. If she asks you your Apple ID password, you can work around it and will need to recover. See the articles below. Also, if you have proof of purchase for your device, you can go to an Apple store, they will help you with the Apple ID PW, but only if you can prove that you are the owner legitimate.
Forgotten ID Apple PW:
https://support.Apple.com/en-us/HT201487
I forgot the password:
https://support.Apple.com/en-us/HT204306
If you have forgotten your password to use the Recovery Mode screen lock.
https://support.Apple.com/en-us/HT201412
If you have forgotten the password of restriction, you need to restore your device as New. Go through the normal process to restore your device, but when you see the option restore again, or from a backup, do not forget to click New.
-
problem iPhone 5s load is reduced to
My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?
Please help me anyone
-
I deleted some photos from my iPhone 6 but I noticed that it was also deleted out of my IMac. How can I stop this
If you use iCloud photo library all the photos you delete a device will be deleted to iCloud and all other devices that are connected to this library to iCloud. The iCloud design library should synchronize all changes, including deletions, to all devices. You can reduce the storage space required on your phone by selecting settings > iCloud > Photos > optimize iPhone storage.
-
I can't unlock my iphone by apple ID knowing that the previous owner removed the device from his account, but still the unit asks the old code in order to unlock the phone
If the device is always ask for the ID of the previous owner, then it is has not been deleted.
-
Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...
-There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?
-One API PI or raspberry beaglebone exists for LabVIEW?
-Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)
Thank you very much for your advice!
Best regards
Elena
Elena,
I know raspberry, so no comment on that.
For the rest:
-Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.
-LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:
1. choose food that serves your needs.
2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)
3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).
4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).
Norbert
-
Unable to set my HP6632B supply voltage of 12 v with the hp66xxbc
Hello:
I use the IVI hp66xxbc driver to control a power supply DC HP6632B, and I get an error when I try to set the voltage of 12V. I can adjust the tension manually on the front panel and using the option "Contact instrument" in the tool "Measure and Automation", but not with the driver of the IVI. Any help would be greatly appreciated.
I tried to set the ÖVP at 20, but the pilot didn't like either. And I could do it manually. This part is not included in the attached report.
Here is my configuration:
LabVIEW: 7.1
hp66xxbc driver: not sure.
Just run "HP6632B-Init-and-Set - voltage.vi.
Here is the error I get:
"Error 1074135024 occurred to hp66xxbc configuration OVP.vi.
Possible reasons:
Driver status: (Hex 0xBFFA0010) invalid value for the parameter or property.Secondary error: (Hex 0xBFFC0004) parameter 4 out of reach, or an error occurred when setting setting 4.
"Development: OVP limit"
Hello Mike,.
It seems that the problem is possibly due to the deactivation of the query ID in any of your folders. In many cases the specific driver IVI uses by default the model with the minimum of features and smaller beaches. Do you have errors if you try to set the ÖVP to 2 volts? If you still have a problem after activation ID query and try a smaller value of the ÖVP, please post an example with a minimum of code that reproduces the issue and doesn't use the wrapper to live and also include a capture OR the spy of the occurrence of the error.
See you soon,.
NathanT
Maybe you are looking for
-
Firefox 27.0.1 use up to 500 000 k of my memory! Why and how I fix this?
I have Firefox. And sometimes, when I'm watching a video, the video is immensely! So, I went to Task Manager to see how much memory using sound. And it's using a huge 480, 000 k! I have a basic theme and very basic addons. Nothing complicated. Almost
-
Re: NB200-11 L recover disk
Hello My NB200 11 L is not start properly. I don't have a recovery CD. I saw that Toshiba offers a download for disk recovery service but cannot find this service in the site of toshiba UK. I'm looking in the wrong place or could someone help me to g
-
I have created a RT FIFO as in the figure below. When I want to write about the FIFO, I get the following error.
-
Original title: blue screen * stop: 0x0000007B (0xF79B1524, 0xC0000034, 0 x 00000000, 0x00000000, how should I do for vista He says to run CHKDSK /F to check for hard drive corruption. then restart your computer, how can I do
-
Hi, I tried to print a PNG image in painting, I did on my HP Deskjet 3050 J610 without lines or borders. This is a fully colored picture and I'm trying to get it to reach all ends of the page, so I can print without ANY white on the page at all. Than