My kindle does not work on my PC.

Similar Questions

• Kindle does not connected macbook pro sharing network

  Sharing my internet does not work on kindle 7th generation, it says that it is connected to wifi but not internet. But this internet sharing works perfectly on all other devices. I share of ethernet port thunderbolt, which is behind my proxy of the Institute. I do not understand how to make the static settings on the kindle. I tried this link https://discussions.apple.com/thread/2743129 , but it did not work!

  Mac OS X 10.10.5

  You should probably talk to the Amazon Kindle support people. My Kindle has Wifi or Internet connection problems often, and if everything else works fine, then it sounds like the Kindle. http://www.Amazon.com/GP/help/customer/display.html?nodeID=200127470

  Good luck

  GB

• Touchpad does not work on Satellite C55-A-184

  My touchpad does not work...
  I don't have a mouse to use to get the details of the driver etc.

  Can someone please help
  It is so boring.

  I can't download the update of the driver as I'll have to use the kindle to find help,
  Any advice would be greatly appreciated,

  Thank you.

  What happened exactly, or what exactly makes you in the past, until this problem happens?

  First of all, please post some details on your laptop model and the system you are using.

  Then check if your touchpad isn't disabled.
  To enable or disable the touchpad, you can use the function key. It depends on the laptop model. Either use the FN + F9 (F9) or FN + F5 (F5)

  In case this does not work you need to connect a USB mouse, just to be able to reinstall the driver for the touchpad, but to be honest, I t will think his problem of the touchpad driver.

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• Administrator Bios password does not work on HP 4420 s XT940UT #ABA Windows 7 64-bit

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits I suppose initially that he came with? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Once you open a session with the service the customer of HP one case of pension, they will provide once the utility you and steps to execute it. who can capture the UUID. BTW - UUID is a unique ID for each machine (16 digits or more) stored in the BIOS itself.

  Once the results of the utility (UUID and other info) in the log file, shared with HP, they can generate a key file (SMC) to reset.

  Well, depertment of technical support can help you in it, no need to ask for anyone in particular or the Department.

  It will be useful.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• Open the link behind Mail does not work

  Sierra using my link opened behind Mail does not work. The link opens on the top of the window.

  This option works for me in Sierra... is working for you with your previous version of the OS?

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Do not disturb (on request) does not work

  I have an iPhone 7 more with iOS 10.0.2. I had set up as NEW when I got it. I use the function do not disturb I SLEEP every night to block the incoming notifications apps and emails (including work with the application Outlook email). I leave the phone won't cut not so I can make sure my alarm wakes me up the morning. But it does not work. I still wake up emails and notifications of the app. It worked on my old iPhone with iOS 6, 8, 9 or even 10.

  I see a lot of old messages and questions about DND not work, but they were more specific to older phones and ' iOS.

  Anyone else having this problem?

  Any ideas for help?

  Thank you.

  I'm sure that I understood this.

  I had "only when locked" checked and not 'always' in settings do not disturb.

  I leave my iPhone unlocked all night using the bedside table Central app as my alarm clock.

  There we go.

• Contact ID does not work after update iOS10.0.2

  http://www.Macworld.co.UK/how-to/iosapps/iOS-10-troubleshooting-tips-3646690/

  Troubleshooting iOS 10 tips: Touch ID does not work

  Some users have reported that a previously happy Touch ID installation stopped working when they made the update to iOS 10. It is a pain, but rescuable - you will probably need erase your fingerprints and re-enter.

  First, however, try something simpler: go to settings > Touch ID & password, enter your password, then press the buttons next to pay Apple and iTunes and App Store so that they become white. Turn off your iPhone and turn it off again, then go back to settings and turn the two knobs back to green (you will need to enter your password Apple ID).

  Who fixed the problem?  I haven my Aff!

  If not, go through the fingerprint stored in settings > Touch ID & password - press each of them in turn - then erase fingerprints. Then go back and press Add A digital footprint and put back them in. It's a bit complicated, but it should fix the problem.

  I did all that, but the problem could not be solved.

  Try the following steps:

  1. go in the settings, press button ID & password, enter your password. Then turn off iTunes and App Store. Restart your iPhone or iPad. Return to Touch ID and password in the settings and re - turn on iTunes and App Store. Press Add a fingerprint to add another print.

  2 remove and re-add fingerprints: settings > Touch ID & password > enter your device code > scroll to find fingerprints fingerprints. Press the fingerprint, that you want to remove, and then press DELETE.

  3. restart your iPhone by pressing and hold the Sleep/Wake and home.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Scan with preview - several Pages of a PDF THAT does not work in Mac OS Sierra

  Hello everyone,

  I had upgraded my Macbook Pro (early 2011) to Mac OS Sierra. A famous feature of older versions of Mac OS is to use Preview to scan documents to PDF format, joined the pages scanned all of a single document.

  After upgrading to Sierra this feature does not work correctly. The pages are not more combined into a single PDF. Anyone who has observed the same problem?

  Best regards from the Germany

  Jörg

  Yes, it's been posted here several times.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.