My laptop seems to be folded at the beginning

Hello

Something I noticed when I started to use my ultrabook: if I place it on my desk / another table, he seems wobbly. The front left side seems to be hovering in the air, about 1 mm from the surface of my desk. I checked all the rubber below thingies and they are always there and properly set, so what can I do to stop hopping? I rather not remove one of the rubber thingies because I fear that will cause scratches on the bottom, when I move my ultrabook.

Outside of my ultrabook is wobbly, I love him, but hopping is more annoying since I use my ultrabook all the time when, in lectures or writing tests of lawschool. You have a simple solution, like a larger rubber thingie I place below?

Best regards
Marlinde

Hi Marlinde

How much time do you have your laptop? Try to contact your local dealer, explain the situation and ask if you can get the replacement. Maybe this should be the first step for you.

What do you think about this?

Tags: Toshiba

Similar Questions

  • my laptop seems to have burst. The screen is black and it is not connected to the internet, bu it's on

    The laptop would go sometimes dark, I would slap the mouse pad and it would come - it was a few months ago. In recent weeks it went dark while listening to something on the internet, I have to stop it for a few minutes, but he could return and sometimes come back by touching the mouse pad. The days he did it more often, and now he won't even after leaving it out overnight. It's as if he didn't want to be used for many hours a day. The internet light would not come and I hear it run slowly. I bought a supply of malware from the Web to a 'partner' sites (not me remember not the company name =------, on May 24, 2012, and that they were supposed to provide technical support for 2 or 3 years.) However, if I can't see the screen, I can't use them.

    Hello

    Thanks for sharing the information. In case, if you need help, you can always after your questions related to Windows and your valuable suggestions in the Windows forum.

  • Subscription to creative cloud seems to have ended at the beginning

    I bought a subscription of 12 months in may 2015, today I tried to use Lightroom, but he says test expired; I confirmed that I'm connected with my Adobe ID, I have tried to re - enter the license code but it said that it had already been used.  Photoshop was available, but he said updated necessary; after update to Photoshop, he says and then start the trial.  I tried logging out of my Adobe ID and insert it again creative cloud by restarting.  No effect.

    Lightroom uninstalled and reinstalled, it now says buy now.

    Of course I already bought once so I don't want to buy new.  The product I bought was "Adobe Creative cloud photography Plan: Photoshop CC more Lightroom - 12 month license - download (PC/Mac) ' 25/05/2015 from Amazon and it is installed on a Mac (El Capitan 10.11.2); It worked fine until when I finally used Lightroom 2 weeks ago.  Creating cloud version is 3.4.1.181

    Thanks for the reply of John, I can confirm that I have worked through two solutions.  I wasn't able to get Adobe Application Manager to disable the product but maybe it's just for CS6 applications.

    I have uninstalled all Adobe apps, uninstalled creative cloud and renamed/library/application support/Adobe, reinstalled creative cloud, reinstall applications and still have the same situation.  I then tried opening one of the applications that are now available again as requests for tests.  I signed up from the Help menu of the application and signed on again once.  As a result, it now seems to work.

  • Laptop not recognize its system on the computer

    My laptop seems to be activate / recognizing the sound system on the machine that rarely. It becomes very difficult to predict and use the machine. Any thoughts why it's happening?

    Hi Goyal,.

    The problem may be due, if there is a problem with your volume settings, your sound card or driver.

    1. What is the brand and model of the laptop?

    2. you receive an error code or message?

    3. have you made any recent hardware or exchange of software on your computer before the show?

    4. are you able to hear the speakers built into the laptop?

     

    Run the Audio troubleshooter, updating the sound card drivers, by following the steps in the link below.

    Tips for solving common audio problems:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

     

    For reference:

     

    Sound cards: frequently asked questions:

    http://Windows.Microsoft.com/en-SG/Windows7/sound-cards-frequently-asked-questions

     

    No sound in Windows:

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    If you need further assistance on this topic, let know us and we will be happy to help you.

  • Guests of password to you at the beginning, before my Toshiba has loaded my system.

    Original title:

    When I turn on my laptop asks me my password at the beginning until my Toshiba has loaded my system. Once loaded, I wonder my administrator password, until I can make progress. How can I remove the first request of password, or delete partitions?

    Hello

    You have the first password, who is invited before the start of the computer to the top?

    The password you are talking maybe a password for the BIOS.

    You will need to access the BIOS and disable the password.

    BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I suggest you to contact the manufacturer of the computer for tying this topic.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  • tried to create a private folder for the work of the book as the in-laws use our computer but don't know where to start and it seems to have sent the info im trying to hide anywhere please help

    tried to create a private folder for the work of the book as the in-laws use our computer but don't know where to start and it seems to have sent the info im trying to hide in every sense, please help, its windows 7 we have, I will learn more about computer but now I have to stop my son-inlaw through my belongings on the computer

    Nancy

                                                   

    Hi Nancy,.

    Encryption of files and folders is a way to protect against unauthorized access. EFS (ENCRYPTING File System) is a Windows feature that you can use to store information on your hard disk in an encrypted format. Encryption is the best protection that Windows provides to help you keep your information secure.

    You can make a folder and then encrypt it.

    http://Windows.Microsoft.com/en-in/Windows7/encrypt-or-decrypt-a-folder-or-file

    Good day!

    Answer please if you face concerns.

  • Download not add-ons for Muse. Easy to buy and all seems good, but nothing in the downloads folder. Adobe "Obtained" Watch website I have Mac, Muse CC 2015, C Clowd, Cync files is on.

    Download not add-ons for Muse. Easy to buy and all seems good, but nothing in the downloads folder. Adobe "Obtained" Watch website I have Mac, Muse CC 2015, C Clowd, Cync files is on. Help?

    You should contact the provider of the Add on in this case.

  • When you say to put in the folder it comes, he used to do, now it seems that put it in the last folder you used, I can't remember what it is that this is not possible it just?

    When I export images I check it so that the pictures in the folder just, but there is no more, it puts the photos exported in the last folder I exported photos in and if you can tell me what this was I would really appreciate it.

    I put it again and again, but it is still never done.  I'm obviously missing something.  I have the same problem with Photoshop.

    leannewhatever wrote:

    I tried what you suggested, but it did not work.

    What does your test? LR uses the preferences of the previous version file when you perform an upgrade of LR (Lr 4 to 5, LR 5 to 6, etc.). In the process of 'conversion' of the old preferences file, it can be damaged. We had many reports with many different "unexplained" symptoms after an upgrade like this. Reset the LR Preferences file solves many of these issues.

    Make sure you have "Add to catalogue" checked. If this is not the case, the exported files will not be imported into LR. You will need to right click on the folder that contains the original files and choose "Synchronize folders," which will import the exported files. Even if you have "Add to catalogue" verified that I suggest you that you synchronize the folder with the original files to see if it makes them appear.

  • Increases the size of the "HDD Recovery" folder on the partition "D".

    I am the owner of laptop Toshiba Satellite, recently, I noticed that my D: drive (unused) is saturated and after careful analysis I realized that the "HDDRecovery" file size is > 200 GB.

    I don't want to remove the file or remove image files inside that I need the functionality of recovery, but I have not a clue how to handle the recovery process to decrease the volume.

    Do you have an idea how this issue?

    Wojtek

    Hello

    It seems strange to me that the size of the HDD recovery folder would increase up to 200 GB continuously. Probably for laptop computer stores files backup automatically in this folder, but I m not very well why

    However, I recommend you to create a recovery media (recovery disk) using the Toshiba
    Recovery media creator (this software pre-installed on the Toshiba laptop).

    The use of disk recovery (or USB key recovery) would fix the laptop back to the factory and even if settings you should remove the folder in HARD drive recovery or the entire partition, this partition, and these files would be created again.

    Hope that this information could be useful for you.

  • Computer laptop XP does not appear in the network of Vista laptop

    My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

    Can someone help me with this? Thank you so much in advance.

    Hello
    Maybe this can help.

    To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted
    Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).
    If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

    If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

    In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

    http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have permission and security issues with Vista/Win7, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

    * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

    Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

    -----------

    If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • I lost my archive folder in the mail...

    Hello

    Does anyone have any idea why I would have lost my Archives folder in the mail?  I had one and can't understand why he disappeared.  The folder is still on my webmail ISP page.

    Also I seem to be unable to find the mail folder.

    Help, please.

    Robert

    I discovered that I had excluded the folder Mail of Spotlight.  By excluding, I wanted her out of the Spotlight, not the results of Mail classification.

    I do not understand that all research... Mail, Safari, contacts, etc ... are the result of global search for Spotlight arctivity?

  • What happened to the ability to drag a link into the address bar in a folder on the personal bar?

    It has been possible to left click and hold the icon of the site in the address bar and drag it to a folder on the personal bar to create a bookmark. This feature seems to have disappeared somewhere along the line.

    It seems that the problem may be intermittent. When I posted this question yesterday it worked and I was able to rearrange bookmarks into folders in the toolbar by drag-and - drop, but today both are behaving like expected. I'm not aware that I've changed nothing, but that doesn't mean not changes nothing!

    If all goes well, it will behave in the future.

    Thanks for responding.

  • How can I move all messages and folders in 'Local folder' in the folder of my main account? The local stuff is to import from Outlook

    I imported my mail from Outlook, and they went into a local folders. I want that they in the main folder for the my account section. How can I move them there?
    For the moment, I create each folder and then copy the contents of one folder to another - crazy, and I have dozens of files

    DOH!

    After spending most of last night slowly moving the files from the Local level to the account that it's a little late for me to go back the other way, but what you suggested looks like it could work.
    Still seems simpler to 'right click' a folder and "move it" and all subfolders to have it move properly as well. Of course your test produces a different result for me. I wasn't able to drag all the folders with the sub folders and the contents of these subfolders go with it, only the contents of the main folder is gone.
    Still, as I said, I have now done most probably time call it a day on this topic and I hope that all similar problems see your answer above - cheers.

  • Firefox creates "desktop" folder on the desktop whenever I have download

    So I just installed Firefox on my new laptop, and whenever I download something, Firefox creates a "Desktop" folder on the desktop and download of the sticks in there. I used to be able to download directly on the desktop, but with this version, I can't. I tried tools > Options > save files to, but whenever I have click on the Browse button and select the location of my desired download (office under the "Favorites" section), Firefox ignores and sets the path as C:\Users\User1\Desktop\Desktop. Is it possible to fix this? It is extremely irritating.

    See if it works for you as it does for me.

    1. Create a new folder on the desktop labeled downloads (or any other name),
    2. Open tools > Options-> general
    3. Downloads, click on the Browse button and select the new downloads folder that you just created.

    Firefox wants a "folder name" for downloads, by specifying the 'bureau' only or won't 'Favorites '. When you try to force the issue, the name of the folder will mimic what the user is trying to specify. In your case, it created the folder "Desktop" on the desktop. Yes, it's different from previous versions of Firefox, but this change took place ago - many versions so it is not really 'new' any longer.

  • New itunes install. All the songs are on an external hard drive. A lot of songs do not show up in itunes, but they are in the folder on the external drive.

    This seems to be a common problem:

    Recently I had to reinstall Win 10 & then itunes. All the songs are on an external HD iTunes does not show a large number of songs that are in the folder on the external drive. I copied the .itl to the new itunes folder. I also tried holding down - from itunes shift - select a library. Any ideas how to be able to see the songs in the itunes on the hard drive folder in the itunes library?

    Thanks in advance

    Steve

    See make a library of portable split. Have you copied the correct .itl file, or should you connect an external hard disk .itl file? If you can find the correct .itl, it should have all your songs and playlists. See the empty/corrupted after upgrade/crash iTunes library when the library has been altered for the first time with the new system. If you have to start creating your new library in an iTunes folder to the root of the external drive and move all the media inside... \iTunes\iTunes Media before adding to the library.

    TT2

Maybe you are looking for

  • Libretto U100: pictures are wider than they should be tightened

    When viewing my photo file, all photos are wider than they should be tightened. I guess that's because the screen is a 'big screen '. Is it possible to display the photos in the normal width? Do I need to change the settings to do this? Thank you for

  • Windows Firefox keeps jumping up and down.

    I downloaded the latest version of Firefox, but I have a slight problem. Everytime I open Firefox it jumps up and down. How can I stop it? This has happened Each time Firefox opened == Earlier, I downloaded the latest version of firefox 3.6.6

  • Some games do not work on a Satellite A60

    I currently own a Satellite A60 with Mobile Radeon 7000 IGP, however some games if just bought don't work, they are not 'new games' its title as «Command and Conquer Generals» You can up grade the graphics card in a laptop with those located on the o

  • How to change the existing terminals 'view as an icon' to view data by program type

    I had a few LabVIEW code inherited from someone else. And there are tons of existing terminals, displayed as an icon. Is it possible to batch process to change all of display them as data type? Thank you very much!

  • Image or icons on labelfields

    Guys, Is there a way I can create labelfields with icons or images. Rgds Nadir Firfire