My MP210 will be only, preview scan scan button to highlight

Similar Questions

• HP Solution Center V14 will not display the scanning buttons.

  I just bought a HP Photosmart Premium c410a printer and I can't get it to scan anything either the printer or the PC using HP Solution Center V14.  I did the following:

  Installed the printer in a wireless device and the software stopped with a fatal error during the product Config.

  Everything uninstalled.

  Reinstalled the same printer way and same result.    Icon of the solution Center HP desktop, but when you click it nothing happens.

  A ran HP printer Diagnostics and it showed the error scanning.

  Everything uninstalled.

  Reinstalled the printer this time as a USB connection, install via the test page printed, itself went well.  Clicking on the icon, HP Solution Center and it worked but do not display any Scan keys and if I press the analysis on the printer all them that get is the "Scan problem" and I need not the printer to tell me that as well.

  Downloaded the latest version of the software of HP and Yes uninstalled and installed as a USB connection and everything went well, but the same result using HP solutions Center.

  Can I send items to the printer, I can copy documents if the printer seems to be ok, it's just that useless software.

  Any ideas (other than to return the printer to the store and get refund, which will be soon I think) or suggestions appreciated.

  Steve

  Dr. & ShlomiL,

  Thank you two for your help, I've updated my FlashDrive to v11, still no luck so I used HP uninstaller and made a level 1 to level 4 don't uninstall get rid of everything related to HP.  I think part of the problem might have left to install my old printer psc1210 overs or my wifes.   After uninstalling and then stop firewall, protection against viruses and any other useless software, I had installed another as a wireless printer and it WORKED, yippeeeeee

  So now everything works perfectly, thank you once again.

  Merry Christmas and good luck for the holidays.

  Steve

• I have a printer HP Deskjet 3054 - when parsing it will be only a small part of what I want to scan

  my printer will scan only the upper left what whether I want to be scanned and I need a whole letter to scan. I went into the settings and there is nothing I can find that will help me. What can I do?

  Hi almarlane,

  What version of OS are you running?

  What application program that you use to scan (capture image scanning HP, ECT.)?

  Make sure you have selected the entire document by holding down the mouse button and drag over the area you're wanting to analyze before hitting the scan button. Here are some documents that help with scanning.

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.7

• Windows Fax and Scan - no handles on culture after preview scan tool

  WFS, I can't change the apparently random preview scanning area because there is no handles on the tool of truncation. I tried to uninstall and reinstall my scanner (canon mp210) and WFS - no help. It used to work fine. I wouldn't mind disable truncation completely tool if it would be easier.

  Hello

  Thanks for posting that ask you about Microsoft Community Forums.

  According to the description, you are unable to get two handles of the cropping tool after preview scan.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. Did you do the changes on your computer before this problem?
  2. Programs that you use to scan your photos?

  I suggest you to follow the below methods and check.

  1:Run SFC method scan now

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. The SFC/SCANNOW command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the problem persists, try Method 2.

  Method 2: Create the new user account.

  Creating the new user account would solve the corruption problems in the user account.

  I suggest you to follow the article given below to create a new user account and check.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  Hope the helps of information. If you have questions about Windows. Feel free to post. We're here to help.

• Can I combine all pages of a document of several page, in the end, only really scanned document?

  Hi all

  I have a HP Officejet 6500 a Plus, which is a combined printer/copier/scanner, I have attached to my 19 HP all-in-one computer, Windows 8 operating system.

  I often use the scan function by scanning a document which will then automatically be saved in My Documents directory under the default name of 1 Scan.

  I hope that there is a better way for me to make the following about the scan function.

  For example, if I have a several page document, let's say, for example, that it is 3 pages, I will, to start, open the top cover of the HP Officejet 6500 has more scanner and place of the first page on the document table, close the lid and press scan. Then, I wonder if I want to pdf or jpg. I'll usually choose the pdf, and after a few more questions, here, this first page of my document will get scanned and then recorded in the Documents directory under the default name, 1 scanner. Then I take the page 2 of the document and follow the procedure above, this 2nd page to finally be saved in the Documents directory under the default name, Scan 2. I repeat the foregoing for the 3rd page, in order to have ultimately recorded in the Documents directory under the default name, Scan 3.

  Now I have 3 different files, they being 1 Scan 2 Scan, Scan 3.

  Currently, if I want all this email to someone, I need to join all 3 files in my email. Thus, I charge the receiver with duty open 3 different files attached, i.e. the 3 different fasteners files named 1 Scan 2 Scan, Scan 3, if he or she wants to view the 3 full page document.

  Is there a better way that I can use my HP Officejet 6500 has more to be able to put all 3 pages in only 1 scan, so suffice it so send an email to only 1 file attached, so that the receiver will only be required to open only 1 file attached in order to see the 3 different pages of my document?

  Any help would be greatly appreciated. Thank you very much.

  Best of all,
  James

  Hello @James8888 , I hope you're well

  Yes, you can scan multiple page and save it in a file. See the link below for instructions.

  1. Click on this link: Scan of Windows 8 with full functionality software HP for HP Multifunction printers
  2. Select "how to scan with HP software.
  3. Select "how to scan an original of several page in a single file.
  4. Follow the steps from there

  I hope that assistance, have a wonderful day

• I want only to scan old slides and photos for catering and archiving using a v-600 bought Epson recently. However, I want to be able to integrate the text (metadata) such as captions or descriptions of each of the photo file. What software LR or PS would

  I want only to scan slides and old pictures restoration and archiving using a recently bought Epson v-600 (always in the box). However I want specifically to integrate the text (metadata) such as captions or descriptions of each of the photo file. What software LR or PS would be more appropriate and easier to use? Running Win 8.1 on a desktop computer.

  Both will work, but Lightroom would be better to enter metadata in the image. and keep track of them. You get both with the Photoshop Lightroom bundle for $10 per month.

  Lightroom and Photoshop | Plan of cloud of Adobe's creative photography

• Office Jet 6700 will not control panel scan. ideas please

  Office Jet 6700 will not control panel scan. ideas please, everything else works fine and happy with printer

  Have you tried to perform a full power cycle on the system and try the analysis immediately after that everything is turned on?

  • Unplug the router all-in-on
  • Wait 30 seconds
  • Plug the router back in power and wait until it completely initialize
  • Restart the PC
  • Unplug the printer while on
  • Wait 30 seconds
  • Plug the printer back in direct power

  So, have you tried to disable your firewall and protection scan from the front panel of the printer?  Sometimes a firewall service will see the printer as a threat and block incoming traffic.  However, based on the analysis of gets it PC around as she reaches out to the device, rather than the reverse.

• Essentials of security will run a scheduled scan of the entire system on a computer running Win. XP hibernation

  Essentials of security will run a scheduled scan of the entire system on a computer running windows XP Hibernate

  No scanning is performed in hibernation, standby, sleep, or else that the system is powered off.  You must plan the scan for a time when the PC is running.  MIDI works fine for me.

• OfficeJet 6210... W7 64 bit... will print but not scan

  JO 6210 will print but not scan

  Hello attatronand welcome to the Forums of HP, I hope you enjoy your experience!

  I understand that you are having problems of scanning.  Any specific error comes up when scanning? Is that what you've scanned several programs?  You are still able to make a copy?

  I recommend to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• My dell 964 will print but now scan events.

  My multitack dell 964 printer will print but not scan.  Help.  Thank you

  Hello
   
  1. do you get any error message when trying to scan?
   
  Many Dell printer users have solved this problem by installing the additional software supplied with the CD/DVD printer.
  Put the printer disc in the CD/DVD drive, follow the instructions in the Dell installation screen to install software or additional components and check the result.

  Windows Image Acquisition service provides image acquisition services for scanners and cameras. Check if this service is started.
  1. Click Start, type services.msc and press to enter.
  2. from the list of components, double-click the service Acquisition of Image Windows (WIA).
  3. change the startup type to automatic, and then click Start.
  4 apply the settings, and then click ok.

  The problems of scanning: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-scanning-problems
   
  For more support options, you can post your request here:
  http://en.community.Dell.com/forums/
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• C4750 all-in-one will print only 2 page 8

  I finally got my all-in-one printer of C4750 to leave saying he was offline now, now it will print only less than 2 pages of a Quebec of 8 pages.

  Hi CIN4,

  Thanks for the reply.

  I would recommend that you download and run the HP print and Scan Doctor and see what diagnosis it can offer you

• Scan button on F4480

  I have a deskjet F4480 printer and'm running OS 10.6 on my Mac.  When I got it, almost 2 years ago I couldn't scan button to work.  I was only able to analyze by entering in the preview or the HP folder, etc.  I called HP at the time and they've come a fix to get the key scan on the printer itself works.  The week last Apple has me reinstall OS 10.6 because of a problem that I had with my fan.  This led to losing me the fix on the scan button.  I called HP and they want $25 to tell me once again the fix (my bad for not writing it down the first time).  Does anyone know what is the solution?  Thank you!

  Hello kksumlin

  How your printer is connected to your computer?

  Based on your explanation, it sounds like the Scan options are not set. Please follow the article below because it contains several solutions to solve the problem.

  A 'no. Scan Options' or "scan settings are not defined" Message displays on the all-in-one

• PSC 1350 printer all-in-one: the "scan" button is grayed out.

  I'm looking for just a simple answer to this.

  My 1350 all-in-one (an old model by the way) has all of a sudden the "scan" button grayed out

  He shows me the overview of the analysis, but it does not scan.

  I used this computer and the printer together for many years.

  This isn't a device, just a regular connection.

  Frustrating.

  Hello

  Or select an area on the preview of the scan with the mouse or uncheck the custom size option and choose the required scan size, then you will be provided with the opportunity to complete the scan.

  Kind regards

  Shlomi

• Can not scan using my Photosmart 2610 Scan button on 10.6 Snow Leopard

  Hello

  Just to avoid any confusion, is not scanning the computer here (from previewing or HPScanPro). I refer to the scanning using the Scan button on my AiO printer.

  HPScanPro has stopped working for me when I installed 10.6.  What I've read, the solution is to scan to Preview.app.

  My problem is that when I press scan on the printer and select my computer in the list - and say then that I select "Tiff to Preview" in the list, it always launches HPScanPro which fails.

  This feature was important to me because I often have to scan lots of pages one after then the other.   Simply push the button on the scanner, then by changing the page and by pressing on the button again allows me my scan in batches and worry then save all files at once thereafter.  This is a great time saver.

  Is there a known workaround solution?

  Just to update my original post, it seems that HP has updated the software for the Photosmart 26xx (2610 here) for Mac OS 10.6.  The software is dated 2009-10-21, but I'm sure it wasn't there until not so long ago.  Anyway, analysis of the scan key on the printer works again and several features appear to have been improved.  There is also a widget dashboard for ink level.

  I am impressed that HP will continue to improve and upgrade their software for a printer that is no longer supported for some years now.  This printer has been a very good experience.

• HP3630: SCan button missing HP3630

  No scan on 3630 Deskjet button its all done through your computer. Not like the good old 3055A I've just dumped.

  It took me an hour to realize this, but now I've found my way around it, it seems simple enough (I'm 70 years old and more) so a little behind early digital age.

  Go to devices on your copmputer and make sure that its in this folder.

  Click on that and all will be revealed. Printing or scanning options and where the file/send.

  Persevere, he cursed frustrating as HP mention nothing of this detail in their sales presentation text, then rely on chat rooms to answer their questions because they do not work outside office hours to answer questions when most of us work at home.

  @Tringthing

  Welcome to the HP Forums

  Thanks for posting.

  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.

  As I read you're frustrated that you do not "scan" button on your all-in-one printer HP Desk Jet 3630.

  Please follow the steps below to analyze the documents from your computer.

  • Load the item on the scanner glass, into the document feeder housing
  • Look for your model of printer to Windows, and then click the name of the printer in the list of results.
  • HP Printer Wizard opens.
  • Click on scan a Document or Photo.
  • HP Scan opens.
  • Click on scan.
  • Click Save.
  • The window record under opens.
  • Select the folder you want to save the scan, to change the name of the file , if necessary, confirm the file type in the menu Save as , and then click Save.

  click here to find a document that will help you in better scanning.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.