C4750 all-in-one will print only 2 page 8

Similar Questions

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• HP Officeject 7310 all-in-one will print but does not copy

  I have an HP Officejet 7310 all-in-One printer will print and scan, but will cease to copy.  Can someone help me with this problem?

  Another thing to check - in the front, press the Menu key, select Type of paper, plain paper, copy OK and then press start copy in black.

• HP Officejet J5780 all-in-one will print test and diagnostics pages but nothing else

  I tried to install my Officejet J5780 on a Windows 7 machine and install CD does not work for Windows 7.  Downloaded the software and drivers from the HP site and since then the printer prints a test page or a page of diagnosis etc but nothing of MS Office or Notepad.

  Any ideas?

  Hello

  I see that you have a problem with the printer. I would say that runs the print and scan the doctor.

• HP Photosmart C6180 all-in-one will not scan mulltiple pages

  My C6180 will not scan more than one page from the charger. After it scans a page will scan others by using 'add page '. I would analyze all the pages since the charger without manually add pages. I'm used to be able to do. Help, please.  Thank you.

  Have you contacted HP Support for your printer/scanner?

  http://support.HP.com/us-en/product/HP-Photosmart-C6100-all-in-one-printer-series/1153695/model/1153698

• HP ENVY 5530 e-all-in-one: HP ENVY 5530 e-all-in-one will print but not scan

  The material (both print & scan) worked well on OS 10.10.x but as soon as I xfr needed a MBP less 10.11.4 it stopped scanning through the HP software, but will work under Mac software scan. (The side of the printer still works fine.)

  Hi @Mrkil1o1,

  Welcome to the HP Forums! I'd love to help you to scan from your 5530 craving for your Mac. I understand from your description that it worked well when you have 10.10, but since the upgrade to 10.11 you can print but not scan.

  Let's start with resetting the printing system, uninstalling the software, repair the permissions of the drive and re - install & re-add the printer:

  Scrub / uninstall

• HO Officejet 6310 all-in-one: 6310 print only 1/2 of the first photo on 2 5x7s

  I use HP photosmart Essential 3.5 on Win 7 pro 64 - bit Home to print photos, I am printing 2 5 x 7 photos by 8.5 x 11 pages, the printer load photo paper and sometimes sends an error "on paper", I hit ok and it prints but it prints 1/2 or less of the first photo and any 2nd photo the quality is great, just want to print the entire photos and no ink on half of the photos, any help would be great thanks.

  Thom

  Thom,

  Sometimes, the results depend on the program you're using to print.

  Test the printing of two photos on 'plain paper '.

  Make sure that the media type is correctly selected (Photo paper)

  Try / consider:

  Try to print pictures using Windows Photo Viewer > as well as other settings, check that you have enabled "Copies of each image.

  

  Reference and examples:

  Print - Programs_and_Methods

  Section:

  • Photo printing with Windows for Windows Photo Viewer

  Paragraph > print Photo on the main plate

  -----------------------------------------------------------------------

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Printer C4750 all-in-one: do I have to uninstall a driver?

  Hey guys, I now work a new installation and insntalled only driver ' base' for my printer HP Photosmart C4750 all-in-one in this case:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4700-all-in-one-printer-series/379461...

  My only problem now is, I can not adjust the "Volume of ink" to make ink last longer, and the default settings are really black for everyday use.

  The Question:

  Do I need to uninstall the driver of the course 'basic' to install the "all-in-one HP Photosmart C4700 Printer series full feature software and driver" here:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4700-all-in-one-printer-series/379461...

  Thank you, pcpunk

  Hello

  Without unless it calls for.

  Kind regards.

• ENVY 5530 e-all-in-One Series: My ENVY 5530 e-all-in-one prints only two pages of a multi-page document.

  My newly installed (Jan 2015) ENVY 5530 e-all-in-one prints only two pages of a document with several pages of my HP desk top 500-123ea, windows 8.1. Message on PC "Unable to print document", it's even on Double or single sided printing.  A ran Scan doctor, OK; reloaded software and Firmware from the Hp site. He spent hours and hours of reading the elements of list of support HP; Impossible to talk online with HP. very in angry and frustrated. This HP product seems not as "fit for purpose". I will give HP Feedback after this announcement and rate accordingly. I beleve others have similar experience of this problem. HP is aware?  Is anyone out there that can help?

  We gladly invite you.

  A Roll-up update is already available since December, although it seems that the description is not being updated accordingly.

  Follow the section "get the hotfix rollup for Windows 8.1"in my previous link, which can be obtained by installing the package or by using Windows Update, this is the update that the articale refers... ".

  Shlomi

• HP officejet 6500 all-in-one - will not print a worksheet excel in landscape mode

  I can print a worddoc in portrait & landscape very well. I can print a worksheet excel in portrait mode, but when I put it in landscape mode, it will print only one or two inches on the left side & is not in landscape format at all. I unintalled and reinstalled my software updates & printing. What can I do to fix this?

  Hi sbclady,

  I would like to help.  You can answer a few questions?

  1. When you did the re-install, you use a disc or a download from hp.com?
  2. If you print a printer status or self-assessment Test report, can you give me the a.) Product # and B.) Version of the firmware of the printer?
  3. If you shut down your computer (not a reset) and a Hard Reset as described in the following link, is there a change?  Click here
  4. What is the operating system for your computer?

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• C7280 all-in-One will not print envelopes

  The printer tells me the envelopes are the right size and will not print.  I use Windows 7.  I put in all the exact measurements for the envelope in both software (Word 2007 or Hallmark Cards), then in the window HP I set the size, but it will print only on paper in full format, not the envelope.  Is it possible to substitute the rejection of the printer of the envelope?

  Check the paper type: in the C7280 printing preferences/options is set to plain paper.

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).