my new computer never crashes since I instsalled flash all I can do to fix this?
my new computer worked very well until I installed Flash to play a game and since it falls down and must be cold started to reboot.
Sometimes, it crashes as soon as windows is loaded and must be restarted to do anything on the computer. It doesn't have to be online to crash and it crashes even when I do not have anything to do with flash.
I don't know that Flash is what makes crash or if it's just a coincidence, but if you can help I would be very grateful.
Problem has proved to be a bad treatment unit. Everything suggested here as well as what Microsoft has offered tried and kept going again on the problem. Finally found a suggestion on the internet to try blocking off 1 of the dual processors so that the computer was only working on one processor instead of two and now it no longer crashes. Really slow since its only half the speed/processor that is supposed to work. Is about to send the new dual processor to society and replace the one we just bought and installed being apparently faulty.
Thanks for all the help everyone who gave me suggestions.
Tags: Windows
Similar Questions
-
I'm watching the netflixs on my computer but error N8307 KEEP POP UP to what can do to fix this
I can watch only a few minutes of a movie, I'm watching on an instant view on net flix, befor N8307 POP UP error. its me say I have a problem with my conection.everything els internet works on my pc.what can I do to fix this problem.i've exausted myself with netflixs assistance team.
Hello ShawnWilliams1969
Support with NetFlix errors send your question to NetFlix support link below. Thank you. -
I bought Lightroom 5 of B & H Photo a few months ago and since then have now upgraded computers. This new computer doesn't have a hard drive and I can't figure out how to download it on my new computer. I must not have created an Adobe account when I initially purchased and downloaded on my other computer. How can I still download it if the serial number does not appear in my plans and products page? I still have the drive and everything that came with it.
Hello
Please download the Lightroom 5 application from the link below.
http://prodesigntools.com/Lightroom-5-DDL-comparison-vs-LR4.html
Serial number - please visit https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html
Let us know if this helps!
Kind regards
Vivet
-
My computer runs slower since installing Security Essentials. What can I do to fix this?
Hi David,Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.Brian -
I bought Photoshop a couple of years, which was installed by the CD. However, I just got a new computer, which is not a disk drive, so I can't reinstall the program. Is there a way I could download it with the serial number, so I can still have the program on my computer?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Hi, how can I start my programs? An old verson of Adobe creative suite 2 premium for universities? I have a new computer and I find the activation code of the can´t. The old computer was rejected. Can you help me?
Please check: error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3
-
Hi I had CS 5.5 Student edition (download no CD), but then the hard drive of my computer is dead. My computer has been "fixed", but was completely wiped out. I bought a new computer and want to download again - one question - I can't find a way to download the edition of students anywhere on the site, do I just download the normal edition? Two - question because my computer was wiped out how to uninstall / disable one I already downloaded? Because you get only 2 total downloads is that correct? I want to
Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
Concerning
Megha Rawat
-
I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help
He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer
-
I have a new computer and have lost the dreamweaver program. How can I find and redownload it?
Download and Installation Help-
-
What has changed on my computer? I was able to create folders and can no more do this... I have Windows 7 with Microsoft Office Home and Business 2010... before uninstalling some software yesterday, I could create a new folder. now I can create is no longer a new folder.
How can I solve this problem?Thank youHello Annette,.
It is a problem for a long time under Windows 7. To solve it I recommend that you only install the following program - FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .
After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.
Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.
Let me know if this solves the problem for you.
Kind regards
BearPup
-
whenever I shut my computer down I have to type f1 & esc to start, how to fix this?
whenever I shut my computer down I have to type f1 & esc to start, how to fix this?
Hi tonimiller1986,
· What is the number and the model of the computer?
If you are using a portable computer, make sure that your laptop battery is charged and/or the power supply is correct. If the problem is not with the power supply while the issue might be with the BIOS. You can get in contact with the manufacturing system to get the updated BIOS update or reset to default values and check if it helps.
Caution:
- Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.
- BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
I hope this helps.
-
Have photoshop 12 new computer, I don't have a hard drive, how can I download?
My old computer crashed so we bought a new and I got photoshop elements 12. The new computer is not a disk is there a way to download? I downloaded the first time per disc.
Hi rlstever,
Please see the link below to download the installer of PES 12:
Download Adobe Photoshop elements 12, first direct links too. ProDesignTools
Kind regards
Sheena
-
I had an old computer get taken out by a storm. I managed to save to computer hard drives and installed them in a new computer. I can see my programs MS Word, PowerPoint, etc. and Visual Studio 2012. The problem I have is to find the executables for these programs so that I can actually use them. Is there a work around or do I still have to pay for them? VS is a pro version and more than 2K last I checked! Am I missing just the files in a folder, that I don't see? I seem to be able to find the files exc for other programs. (Rosetta Stone)
Really, I don't want to buy these programs and will probably go to another (more accessible) suite of software, if necessary. I can write the code in other IDEs and use another desktop software which ensures the compatibility of the MS products if that's the case.Thank you for your time and understanding,HHYou cannot run programs from the old hard disk, they must be reinstalled on the new installation of Windows computers.
Apart from the home folder for Office who would be in the Program Files folder, directory on the original drive Setup performs a number of other things. It will make hundreds of changes to the registry, install many libraries and sign them and put some files in the Windows directory itself.
Also, if the version of Office that was on the old computer came with the PC, it's more likely to be an OEM license. As such, it cannot be installed or run on the new computer as a limitation of the original end user license agreement.
-
I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)
HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers. All computers are coming with Windows 7. HP please find a solution!
I could get my HP PSC 2210 all-in-one to print! I don't know exactly, because I've tried everything I could think of. My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately. I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers. Here is what I tried... again, I tried several things, although I've been in that general area...
connect the printer to the computer
go to the CONTROL PANEL--> Device Manager
Click the arrow to the left of the IMAGING DEVICES (to be developed)
RT click on printer PSC 2200 (should be listed under imaging devices)
Select PROPERTIES--> DRIVER, then uninstall
Select / tick "remove the driver for the device.
the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)
Unplug the printer to computer
re - connect the printer to the computer
Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).
Go to the control panel--> devices and printers
Select printer PSC 2200, select Customize your printer, then the printed test page
I hope that you will get a valid test page. If this is not the case, another option I tried was:
Through the above scenario. When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")
Continue with the remaining steps above.
I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck! I'm sorry that's not accurate. Yet once, I tried everything I could think of, and something finally worked! (I don't think I tried to 'Turn off the pilot') Good luck! .........
).
-
I have a new computer from my employer tomorrow. This old will be discarded. Will it be any problem install all my apps CC necessary on the new computer?
Hi john % 20olavo72423779,.
It is suggested to disconnect and then uninstall the old machine that you do not use the most.
After you disconnect, please install the desktop https://www.adobe.com/creativecloud/desktop-app.html CC app
Let us know if this helps!
Kind regards
Aurélie hamadi
Maybe you are looking for
-
MY friend bought a new iPhone 5 whenever I get a TEXT from him, it displays a different phone number and not its name when the texts she has me, can someone explain how this can be corrected? Eleanor
-
How do I uninstall Awesome screenshots for Firefox
I installed Awesome screenshots for Firefox. How to uninstall it?
-
HP g 23 010: ethernet connections
Bought a new system in March but connected wireless. Now that I need to use an ethernet cable, it does not connect to the internet. Called ISP who says WHAT NIC is bad in the system after connecting the laptop with the same cable to internet. Throug
-
With Windows XP Home Edition... How to switch to DMA Mode?
With Windows XP, how can I change DMA mode?
-
Download driver HP d110a doesn't work on my processor amd c50, pls help
Download used to work on the amd processor and asked a patch {whatever}