MY NEW DELL INSPIRON - FIRST INSTALLATION IS NOT WELL

Similar Questions

• I have new Dell Inspiron 15 7000 2-in-1 graphics card = Intel HD Graphics 520 only see a blue screen in the develop module is the graphics card not supported?

  I just new Dell Inspiron 15 7000 for Lightroom on road.

  Graphics Intel HD Graphics 520 =

  Only get blue screen to develop the module

  This card is not supported?

  It works as Lightroom uses is no longer your GPU for rendering of image in the develop module.

  Please see the FAQ and the troubleshooting of Adobe Lightroom GPU

  ~ Assani

• My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

  My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

  I watched updates of the audio driver for my pc and am not sure which one I need or you can even use it.

  Although "4.1" speaker systems are very common, the ADA745 should work without problems on a new system.  I have no connection to the ADA745 info but I guess it would connect everything as you are currently connected to the old PC.  New systems PC audio supports up to 7.1 speaker (with the most common 2.1 or 5.1) systems.  There is no drivers for speakers, however, you need to define the types of speakers in the control panel (e.g. article 4.1, and if this isn't an option, try the 5.1 and see if works well).   Printed with the new PC installation worksheet should detail the audio connections and if not, there is a copy of the Dell manual loaded on your PC and it has the details on the back panel connections.

  In Vista, the sound control panel is accessible by Start/Control Panel/hardware and sound/Sound.

• Install Windows 7 x 64 on a new Dell Inspiron N5110 with NoOS

  Hello! I recently bought a new Dell Inspiron N5110 with NoOS. Now, I am trying to install Windows 7 Professional x 64 on it from a USB. I made this a hundred times, but now I'm stuck with a problem. After the beginning of the installation it shows me a message:

  A required CD/DVD device driver is missing. I f you have a driver disk, CD/DVD or player of the USN, please insert it now.

  I tried to google for answers to this problem, the only thing I found is that the laptop does not all SATA drivers installed and asks me to install some. However, I can't figure out how to do this. The system doesn't see another Flash DRIVE with drivers on this subject and if I copy the drivers to the root of the USB which I am startup also fails to find the drivers.
  How can I solve my problem? Any help is appreciated. Thank you!

  I fix this plug in USB2.0 flash boot, when the plugin USB3.0 discovers same error message.

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• How to scan with my new DELL Inspiron 560 with Windows 7?

  My new DELL Inspiron 560 with Windows 7 (64 bit) works very well with my all-in-one HP C7280 printer except the scan function.  I tried and tried to get the correct driver, but all I get is "no scanners are detected."  Any suggestions?  I would appreciate your help!  Thank you very much!

  E-mail address is removed from the privacy *.

  Have you downloaded and installed the "Full Feature software and drivers" HP at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&os=4063&product=3204785

  If this doesn't fix the problem there is a HP Scan utility of diagnosis that can help and it is available for download on the same link as above.

• Old software (2004) can be loaded on a new Dell Inspiron?

  I bought a new Dell Inspiron 660.  Can I load and use any software from my old Dell (2004)? Winamp 2004; Canon MP530 printer. Seagate Manager 2011; Outlook Express 2004

  I bought a new Dell Inspiron 660.  Can I load and use any software from my old Dell (2004)? Winamp 2004; Canon MP530 printer. Seagate Manager 2011; Outlook Express 2004

  Outlook Express is a 'no '.  This is part of Windows XP.  You better to choose a new e-mail client/application.

  WinAMP is a freeware third party - Yes.

  Seagate Manager likely came with your external hard drive?  This is the third part freeware also - Yes.

  Your printer from Canon ("n")... Depends on the manufacturer of the device for it's support in your new operating system.  Likely Windows 7.  From the link in this paragraph - it seems they have drivers for Windows 7 and Windows 7 64 - bit - so which resembles a Yes as well.

• My new Dell win 8 PC does not recognize my CS5 install disc.

  My new Dell win 8 PC does not recognize my CS5 install disc.

  I'm ready to upload to the web, but I can't find the right site.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• New Dell Inspiron 3847 could not install

  Yesterday, I bought a Dell Inspiron 3847 desk top. After that I turned on the computer received a message for location of audit United States of setting up normal, English and I choose Pacific Time and next pressed. I received the message on blue screen "we set up your computer, this may take some time." Then after a few minutes, the computer screen went blue screen to flicker multi colors. I had no choice but to turn the computer off, wait and when I turned the computer back on, I got the message - your account has been disabled and then message defaultuser 0, with message insert key disk to reset. Which of course I did not.

  That's happened?

  I got to Best Buy and they do not know the problem. Also better to buy La Quinta CA gave me a very hard time and accused me of put a virus on the computer. Really, I said I just plug it in and turned on the computer.

  Please notify. I have nothing else, and no information has been placed on the computer.

  I would be recognizing a relay.

  Sincerely,

  Copper

  Hi rsmetana,

  You will need to go back to Best buy and talk to a Manager. Your office had a hardware failure or operating system.

• Restore Windows 7 on my new Dell Inspiron N5050

  Just got a new laptop Dell Inspiron N5050.

  It uses about 3 weeks and love it.

  Pop - up invited me to Windows Update. Clicked on Yes.

  Update was underway, I accidentally turned it off.

  Now, it starts, but moments after, he goes to the Blue Screen of Death and, before I can even read the blue screen, it goes to black screen and asked how I would like to start - Normal startup - SafeMode - Safe Mode with guests, etc.

  So I want to restore to an earlier time or just restore at the beginning (factory settings).

  I can do this in one of the options on the black start screen?

  Dear Sir.

  After turning on my laptop, displays the following message.

  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.

  If this screen appears again, follow these steps:

  The BIOS in this system is not fully ACPI complaint, please contact your system for a vendor

  update the BIOS.

  Technical information:

  Stop :-0 x 000000 A5 (X 11, 0 x 00000003 0x000000, 0x00000000, 0x00000000)

  --------------------------------------------------------------------------------------------------------------

  My laptop model: Inspiron 15 N5050

  I buy recently two months back. Why this problem happened, I don't know

  Please advise, how to solve my problem

  I'm waiting for your quick response

  Kind regards

  Christophe Barros

• New Dell Inspiron 1764: Problems with signal low connection to wireless networks.

  I have a new laptop Dell Inspiron 1764 I received on 25 June. It is "replace" a Dell Inspiron 9100, who has learned to be too slow and too bulky for my needs. For the purposes of support, the two laptops are running on Windows 7.

  Overall, I love my new Inspiron 1764. However, I noticed the connection/signal strength seriously degraded, with wireless (Dell Wireless 1397 WLAN Mini card) card, compared to my Inspiron 9100 (Dell Wireless 1350 WLAN Mini-PCI card).

  In areas of my home that my 9100 can obtain the power of the complete signal (5 bars), my new 1764 bars 2 or less. This behavior is not as limited to only my house as I have tested in my work and in an area of less than 10 feet away from the wireless router, I have 'Internet connectivity problems.

  I tried twice this morning talk with Dell technical support. The first person I talked to tried to be helpful and initiated at least a DellConnect session with me so that he can check out some of my settings and such (However, why they went twice in my sharing settings I could not determine as they have absolutely nothing to do with the intensity of the signal).

  Unfortunately, I was disconnected from the session when I went to a place that had less signal than just next to my wireless router.

  I then go on the chat support with Dell and received another technician to speak with. I explained my problem, told them that I was in a DellConnect session with the other technician, and they looked to the top of my support contract.

  They then told me that my warranty does not cover software issues and referred me to the software Department and said it would be a supplement. I told them that I did not believe that it is a problem of software in any way, shape, or form. They told me that it must be a matter of adjustment. I spent several hours scouring the internet forums on Dell and other sites check those who have had similar problems. Some of their questions were certainly the software settings, but I still don't yet to find anything that tells me I have an incorrect setting of software.

  So far, I'm standing in my kitchen, tapping on my Inspiron 9100 with a full 5 bars, while my Inspiron 1764 is sitting next to me with a skinny 2 bars, and I am literally standing 7 feet above the room which houses my Linksys WRTU54G-TM router.

  Personally, I suspect a faulty wireless card, but how to convince Dell to hear my case and replace it instead of trying to bilk me for support of useless software?

  I hope Dell Tech Support bed actually this post, or people with the same problem can Dell refer to my previous post describing the problem and the fix.

  It IS a PROBLEM of MATERIAL WITH the ANTENNA, AND VERY PROBABLY THE DIFFERENCE BETWEEN a DECK CONNECTION at the ANTENNA of the PLATE, from connections TAPE FOIL INDIVIDUAL at the ANTENNA of the PLATE, THAT DELL MUST HAVE RESPONSE BETWEEN WHAT MINE PORTABLE has BEEN CARRIED OUT AND THE SPARE ROOM WAS MADE. THE PROBLEM IS NOT SOFTWARE, PROVIDER OR ROUTER, IT IS THE PLASTIC WITH THE ANTENNA CASE!

  Dell is in fact losing more money with the hours of technical support through software patches and sending technicians with new wireless cards that does not solve the problem. They need to send and replace the plastic case behind the LCD screen with the updating of antenna and connections.

  Good luck!

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• Dell Inspiron 1525 Microphone does not

  I have a Dell Inspiron 1525 with a built-in microphone. I run on vista. The microphone is not picking up my voice. I went to the control panel. I have made sure it is activated, and all volumes are rising. It is said that SigmaTel Microphone Array works, but that's not true. I also uninstalled and then reinstalled the SigmaTel driver. I did a system restore and that didn't help. The speech recognition does not pick up my voice either. All other sounds work fine, I built in Webcam which works very well, except for the record. But who is also defined on such sigma with all volumes upward. I've had this computer for over a year and the microphone used to work, I think that when I updated something she decided to not work. But I really need my microphone to work, and I am really frustrated because I can't use it. ANY advice would be appreciated thanks!

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx
  --------------------------------------------------------

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Dell Inspiron 7559 - headphones do not work

  Hey everybody,

  I was with my Dell Inspiron 7559 this weekend and suddenly stop the audio of my helmet. I had no problems during the first month I got the laptop and audio still pregnant works very well. When I plug in the headphones the dialog box also don't watch not asking questions on the audio device connected to the port. I know the headset works on my phone, and I tried uninstalling the Realtek audio driver and using the native driver. Nothing seems to work. Someone at - it suggestions? I'm grateful for any help!

  Best,

  Cameron

  Hi mammothus,

  Thanks for posting.

  Have you tried another set of headphones?  The 7559 decision-making is a composite, which means that the headphones and microphones can be inserted into the same taken.  So if your current headphones are not lining up with the plug, so they will not show.

  Some customers have tried a different approach by purchasing one of these dividers, which seem to work pretty well, and they are inexpensive.

  

  Please post back with your results.  Thank you.

  Kind regards
  Robert