my new mac pro keeps freezing and is really slow because of that colourful circle of spinning!

Similar Questions

• MacBook Pro keeps freezing and timing after update to El Captain 10.11.15

  I have a MacBook Pro, which was previously executed on SCF 10.11.14 2013. I began to see problems before my laptop even turned on! When it is restarted after installation, I got about 60% of the way down the front loading apple bar it has completely stopped. I waited quite awhile (maybe 20 minutes) but no progress on the charge. I did a reboot hard twice before he finally finished (sidenote: both times I restarted, instead of starting at the beginning of the load bar as it should, the load bar would start in the place of 60% that he is stopped at the first time).

  It finally comes and I had to open iTunes, Photoshop and Safari so it was very laggy. After working on my laptop for five minutes, the song that I had started doing these breaks, and Photoshop as well froze upwards. I tried to go on Safari, and that's where the beachball replaced my mouse arrow. I tried to use my MB with the only window open (photoshop), but even force weren't no longer works. It just seems to be freezing for longer periods of time.

  I ended up doing a hard reboot once again and only with the help of Safari, but this does not work. Hard restart once again tried only using Photoshop and encountered the same problem. This last time, I have Photoshop open, but for some reason, the tools are not answer at all. For example, when you use the Paintbrush tool, you will see a circle in the placement of the classic mouse arrow when you are in the photoshop window. Well, the arrow of the mouse remained and everything I clicked on, as well as two fingers/output action zoom did nothing. Nothing does in Photoshop anyway.

  Could someone please, please help me? I'm a photographer and I have a project due to my clients in the morning, and I can't afford this issue right now. I write this on my MB Air, which runs on CBS 10.11.13. I'm afraid to try an install of update on this one!

  If nothing can help, can someone tell me how easy and on an empty stomach to downgrade to the previous version of El captain? Thanks a bunch!

  There is no easy way to downgrade. He must erase the drive and then reinstall OS X. First, you need a good backup. Or you can try the following:

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  Boot to HD recovery: restart the computer and after the buzzer, press on and press and hold the

  Command and R keys until that Menu Utility screen appears.

  3 repair the hard disk and permissions: restart the computer and after the buzzer, press on and hold down the command and R until the Menu Utility screen opens.

  When the Utility menu, select disk utility, and then press the continue button. After loading disk utility select it

  indented (in general, Macintosh HD) entry of the list to one side.  Click first aid button in the toolbar. Wait for the operation

  is over, then quit disk utility and return in the Utility Menu.

  4 download and install updated Combo OS X El Capitan 10.11.5.

  5 reinstalling OS x: reboot of HD recovery Select reinstall OS X in the Utility Menu and click on the continue button.

  [Exclusive to use the foregoing authorization to theratter by khati.]

• No Apps tab / empty House food in a creative cloud on the new Mac Pro

  I just set up a new Mac Pro at work and installed the creative and signed cloud application, but there is no tab apps and my house is empty, displays a button that says 'Install Adobe Apps' which does nothing when you press.

  This new Mac Pro came with creative cloud apps installed from my tech team (we have a broad account University they set up with). The applications work correctly, but I would like to be able to keep everything up to date with the creative application of cloud. I have my own ID for creative cloud that works fine on my home computer and my old work computer, but it does everything just not on this new computer, even if I took out my old work computer. I see a lot of messages online on this matter on the windows computer (look they can delete the OOBE to fix), but I do not have these same files on mac.

  Anyone know what I can do to get the application to work as he does at home and on my old computer to work where I can see, install, uninstall and update all my apps?

  I opened a discussion with Adobe and was able to solve the problem. Please see the transcript below:

  Sansan: I understand that you have no Apps tab on your creative Application of clouds, what it is that correct?

  Brandon Schuk: I tried to solve it through the forum, but the staff and myself were not able to understand.

  Brandon Schuk: That is right. I see solutions in the forum but nothing helps with Mac.

  Brandon Schuk: Everything works fine on my old machine and on my machine at home, it's just this new Mac Pro, which is having the problem. Everything is disconnected on the old machine, so this should be my second computer.

  Brandon Schuk: My computer at home and this one.

  Sansan: thank you for the information, I'll be happy to help you with this.

  Sansan: Click on finder and then simultaneously press shift + command + G keys. That you will get the go to dialog box.

  Sansan: To go to the dialog box, type "~ / library '(without quotes) and click on Go."

  Brandon Schuk: it

  Sansan: Then open the folders > Application support > Adobe.

  Brandon Schuk: Okay

  Sansan: From there you can remove folders OOBE and AAMupdater.

  Brandon Schuk: deleted

  Sansan: Open the dialog folder to once again by clicking Finder > "shift-command-G" on your keyboard.

  Sansan: To go to the dialog box, type "/ library '(without quotes) and click on Go."

  Sansan: Then open the folders > Application support > Adobe.

  Sansan: From there, remove the OOBE and Adobeapplicationmanager folders.

  Brandon Schuk: Got it

  Sansan: Have you been able to remove it?

  Brandon Schuk: Yes

  Sansan: Now back to the Utilities folder and trash: cloud Adobe Creative and files of Adobe application manager.

  Brandon Schuk: File utilities?

  Brandon Schuk: Oh, I see.

  Sansan: Okay.

  Brandon Schuk: Wasn't expecting to be there

  Brandon Schuk: deleted

  Sansan: Okay.

  Brandon Schuk: Should I close Office creative cloud at any time?

  Sansan: https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  Sansan: Download the Adobe CC tool from the link above.

  Sansan: After download you if please run the installer and let me know what options you happen to clean.

  Brandon Schuk: Resembles a certain applications listed

  Brandon Schuk: Clean all?

  Sansan: Please let me know the first two option you get?

  Info: your chat transcript will be sent to [email protected] at the end of your cat.

  Brandon Schuk: Adobe Application Manager for Mac OSX 10.6 and CC Adobe Extension Manager

  Sansan: If please select the first and click on selected cleaning.

  Brandon Schuk: fact

  Sansan: Close the application now.

  Brandon Schuk: closed

  Sansan: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4774&fileID=4438

  Sansan: Download Adobe Application Manager from the link above.

  Brandon Schuk: Downloaded and appear to be installed.

  Brandon Schuk: He says "update" for awhile and then disappeared.

  Sansan: since the utilities > Adobe application manager > Core > launch PDApp.

  Sansan: I know the status?

  Brandon Schuk: He's almost done--until the progress bar.

  Sansan: Okay.

  Brandon Schuk: He recently completed and the desktop application creative cloud dropped down

  Sansan: Please log in.

  Brandon Schuk: I am, and I now see the applications tab.

  Sansan: Super! Then, the problem is resolved.

  Brandon Schuk: Thanks a lot for your help

• Creative Cloud Desktop App crashes on the new Mac Pro 2013

  After you use the Migration Wizard to move the apps of my MBP 2010 of a new Mac Pro 6.1 (OSX 10.9.1), I find that the designer Cloud Desktop App constantly just crashes after entering my username and password (it is started as a menu point bar or separate window).  I uninstalled and reinstalled several times with the same result.  Here's a partial crashdump (I have the complete list available):

  Process: Creative cloud [541]

  Path: / Applications/Utilities/Adobe Creative Cloud / * / Creative Cloud.app/Contents/MacOS/Creative Cloud

  ID: com.adobe.acc.AdobeCreativeCloud

  Version: 1.4.0.348 (?)

  Code type: X 86 (native)

  Parent process: launchd [159]

  Responsible for: Creative cloud [541]

  User ID: 501

  Date/time: 2014-02-12 09:01:44.196-0500

  OS version: Mac OS X 10.9.1 (B 13, 4116)

  Report Version: 11

  Anonymous UUID: 62963EDC-D8F8-8862-AD7C-BC6179E3E2DC

  Crashed thread: 31

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  "Reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[NSXMLDocument initWithXMLString:options:error:]: argument zero"

  the problem is caused by 'migration' of your adobe applications rather than install them correctly.

  Uninstall everything that you can run the cleaner and try again correctly installed: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Hello, I bought Adobe for download a few years ago and settled in on a Mac Pro. I want to uninstall on the mac and install it on a new Mac Pro. No idea how I can do?

  Hello, I bought Adobe for download a few years ago and settled in on a Mac Pro. I want to uninstall on the mac and install it on a new Mac Pro. No idea how I can do?

  Just download, install and activate using your serial number.  You are allowed to have the software installed and enabled on both machines.  If you do want to keep the original installation of backup you can turn it off by opening one of the programs and by selecting help-> Deactivate.

  Here's a general link for where you can find the download links...

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  If you want a more direct link, you must name the software and version.

  If you need your serial number, you should be able to find it in your account Adobe online if you have registered the software when you install everything first.

• I just pass the parameters and software my PowerBook has a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install.

  I just upgraded the software and settings, include CC, of my PowerBook for a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install. I try because whenever I restar keep bothering asking for installation, (by the way, the link is not updated). You will appreciate your help.

  never migrate adobe software.  It must be properly installed.

  Uninstall all the programs of cc you can, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Acer K272HUL and new Mac Pro

  Hi all

  I am considering getting a new Mac Pro, and I have three screens WQHD (2560 x 1440) of 27-inch Acer K272HUL I want to connect to it. This view has

  2 x HDMI, 1 x DVI (W/HDCP), 1 x Display Port (in), 1 x Display Port (output) for the entries. Can someone tell me if I would be able to connect all three of them for the new Mac Pro and if so what would be the best way to connect to them and what cables or adapters I need. It would appear that the first simple HDMI to HDMI, but for the other two I don't know which would be best. I don't know if there is a bolt of Thunder to port display cable and I think you used to be able to string two views on display but port do not know if this is an option here. Any help on the best scenario and required cables would be much appreciated.

  Thanks in advance.

  Yes, the Mac 2013 pro can take care of three of these monitors.

  Best is to get three mini displayport > display port cable. $10 each

  You can connect one via HDMI on the Mac port, but mini displayport/displayport is preferable.

  To use the input DVI you need of a displayport mini $99 > DVI adapter.

  Make sure that you connect each monitor to a separate Thunderbolt bus.

  

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• I have problems to re - install Acrobat 10 on my new mac pro. It downloads and installs but I can't find anywhere on my computer.

  I'm having problemsI'm having problems reinstalling Acrobat 10 on my new mac pro. It downloads and installs but I can't find anywhere on my computer. Re-install Acrobat 10 on my new mac pro. It downloads and installs but I can't find anywhere on my computer.

  You can install the Acrobat x update without installing acrobat 9.

  Start the software acrobat x installation.  you will be prompted for the serial number x' are, first of all.

  After entering the serial number x' are, you will be asked (with a drop-down menu) to select the eligible program (acrobat 9).  Select acrobat 9 and enter the serial number its (acrobat 9).

  Enter the correct number at the right time and proceed with the installation.

  Make sure you did more that 'try the link.  Make sure you have made the necessary changes or explain if you couldn't tick the box "any developer".

• CS5 for mac is installed on an old mac.  I have a new Mac Pro and iMac, that I want to install.  I can do this, and if not what is my best option.  I mainly use Photoshop later.  Thank you!

  I have a new Mac Pro and iMac, I want to install CS5 on them.  I can do this, and if not what is my best option.  I mainly use Photoshop later.  Thank you!

  Personally, I would install just without turning off. Worst thing that will l be happen you will need to disable a. Does not mean that you must uninstall just disable and when you need it, just disable one of the other and activate the current. But I assume CS5 because he is not yet supported most probably don't even follow the activations. I'm guessing the last part but when trying to install and activate without disabling one will not harm what anyone,.

• I bought adobe creative suite 6 on the apple store with my new mac pro book and may not know how to install it on my computer that I don't have a cd player.

  I bought adobe creative suite 6 on the apple store with my new mac pro book and may not know how to install it on my computer that I don't have a cd player.

  You can download and use the serial number of your drive to activate it.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• 3D effects of base and new Mac Pro

  Hello

  We run first CC on the new Mac Pro.

  We use a lot of Basic3D effects in our first edition.

  After we changed our machine to new Mac Pro (black)

  When I try to make the section base of 3D or export the video that

  a basic 3-d effects, the computer crashes.

  When previewing, it gives me a few-like digital noize

  the software has problem video processing.

  How can we solve this problem?

  The first crashes without warning.

  I can force it to exit the software.

  The only way is to restart the computer by pressing the power button.

  I rebooted the computer again several times.

  Hi TR4.

  Thanks for the details.

  Please try to change the mode only software rendering engine and check if Premiere Pro crashes again. Then, go to the menu file > project settings > General to change the rendering engine. Please report if the problem is resolved after changing.

  Kind regards

  Vinay

• I have Photoshop CC and will buy the new Mac Pro. CC of Photoshop supports 12 cores?

  I have Photoshop CC and will buy the new Mac Pro. CC of Photoshop supports 12 cores?

  Actually, I disagree with respect.  Photoshop makes good use of a large multi-core system.

  I use a desktop PC top of range 12 core for more than a year.  Hyperthreading gives me 24 logical processors.

  

  A lot of Photoshop uses all of the logical processors whenever possible.  Which means that the system is available for your use as much more quickly.

  How long can you complete the radial blur on the next page reference (it's just a Radial blur the simple of a medium sized image)?  My system it ends well less than 10 seconds.

  http://ksimonian.com/blog/2010/02/24/improved-Photoshop-benchmark-CPU-speed-test-for-both-Mac-PC-free-radial-blur-filter-test/

  Here is my result:

  

  Based on my knowledge of Intel processors, I think that the new Mac Pro with the latest Xeons top range will run this test in an unprecedented 5 to 6 seconds.  If your system takes more time, it's a person with a powerful multi-core system may be doing things in Photoshop while you wait for seconds.

  In addition, large systems - especially those with ultra-high throughput of e/s (like the Mac Pro will) - multitasking VERY well.  The new Mac Pro provides a disk subsystem gargantuan high-speed flash memory.  I had to build a matrix RAID of SSD to achieve this performance.

  Virtually nobody has seen yet Photoshop run as well as he is going to run on this new platform.

  -Christmas

• I have a new Mac Pro I downloaded the first Pro CC and everytime I open it it crashes... I gave up

  So I have a new Mac pro plant.

  I downloaded Pro CC Prime Minister it does not open, it crashes every time...

  But I still work with Photoshop

  I'm lost right now... guess I'll stick with FinalCPX

  Thank you, I will burn it tonight.

• New Mac Pro and Vram

  My new mac Pro has dual AMD over-pants D700 6144 MB but After Effects does 2 GB of VRam in the bottom menu.  Why is this?

  

  This bug is listed as fixed in the next update:

  http://Adobe.LY/1pFGGRE