12.2.1.0.0 gives corrupted file to decompress windows 7 pro

Similar Questions

• Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Original title: Max the mouse

  I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP.  It was simple, little grey mouse that has nibbled cheese if the program was busy.  Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

  Thank you, Mr. Singh. That did not help.  But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

• I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro Service Pack1 necessary

  I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro service pack 1 cd needed someone had this problem and managed to solve it thanks a lot

  Hello

  Thanks for joining us on the Microsoft Community.

  According to the description of the problem you are facing problems with reinstalling Windows XP Professional, and you are to be invited to insert the Service Pack 1 drive to complete the installation.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. did you uninstall Windows XP Service Pack 1 prior to reinstalling Windows XP?

  2. what was the installed Service Pack earlier?

  You may need to uninstall Windows XP Service Pack 1 first and then perform the reinstallation of Windows XP and to check if the installation goes smoothly.

  Please see the following articles for more information about uninstalling Windows XP Service Pack 1:

  How to manually remove Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329015

   

  How to remove folders from Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329260?WA=wsignin1.0

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Corrupted file error message Windows...

  I get the above error message title...  I ran 'chkdsk' several times and it has still not corrected this error... what needs to be done at this point?  The error is:

  The file or directory C:\System Volume Information\_restore {94800E57-BEBA-4742-B1DB-66A7419215AB} \RP341 is corrupt.

  Thanks a lot Elizabeth23 for your answer to my problem.  After much trial and error to try to remedy my situation, I took my computer to my friend who has a knowing computers and he was able to quickly locate the corrupted file and remove it from my system.  I appreciate your suggestions and will keep on place by chance I should run into a similar situation like this even once.  :-)  I'll definitely check these links about detection of malicious software programs.

• system32\DRIVERS\pci.sys missing or corrupt file error but windows xp is already preloaded on computer when purchased

  missing or corrupt file error system32\DRIVERS\pci.sys keeps appearing. I had a problem with google chrome and then stop everything. This error appeared. It tells me to use the cr rom boot but xp was already loaded on the sony vaio that we bought a few years ago. I don't know what to do next because I don't want to lose the pictures and music, we have on the hard drive. Any help would be appreciated

  If your data is not backed up, then at some point that the data will be lost.

  Your Sony are delivered with a hidden restore partition or recovery disks, but I do not think that the Sony recovery allows to repair an installation of win, only pure install.

  You must remove the drive and it slave on another PC in order to retrieve the data, or take it to a decent repair shop for them to do it for you

• corrupted files in c:\Windows\System32

  I read your help on personal settings does not, I'm having a lot of probs with my HP Vista laptop and received this message.  I followed the instructions on the command CMD and it can't repair corrupted files showsc:\windows\system32.  What it means and how to solve it.  Thank you very much.

  Hi, Barbara Ladybbird,.

  1. What is the exact message that you found?

  2. you remember to make changes to the computer before this problem?

  You can try to create a new user account and check if the problem occurs or not.

  a. open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  b. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on create a new account.

  d. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Corrupted files Scan SFC - windows 8.1

  Hello

  I have done sfc scan and got the message:

  Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

  
  

  corrupted files are:

  000004bf CSI [SR] cannot repair the military record [l:36 {18}] "Amd64\CNBJ2530. PBO"prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch

  How can I go about replacing this file with a good copy? where can I get a good copy of?

  Babiife

  You are in the place where it may be much easier to simply re - install windows from the DVD or factory reset.

• How to change several files file extension in windows 8 pro

  Hi team,

  
  
  I'm working on one of my animation projects, by mistake I gave the name of file as practice. # instead of practice # .ext
  I made more than 500 files with the same name and now I want to change the file as .iff extension
  
  
  I tried so many as ren and xcopy commands...
  
  
  But still can not get...
  
  
  Please help, because I don't want to change each file extension individually.
  
  
  Some of the file has been changed individually as below a picture, but I more than 500 left to change files and I don't want to make these files with correct extension because it consumes a lot of time...
  
  
  
  
  
  
  
  Thanks and greetings
  Neeraj Alvarez

  I do not understand your problem and the first link specifically mentions the file extensions.

  Batch change/rename the Extensions of files in Windows
  http://www.AddictiveTips.com/Windows-tips/batch-change-rename-file-extensions-in-Windows/

  And the Google link also specifically mentions the file extensions too.

  See if you can get your hands on this program.  It allows to rename the files so that they have no extension.  Then use it to set a fixed file on these files without extension renamed extension.  It worked for me so it could for you.

  CKRename 1.08: Free download
  http://www.Softpedia.com/progDownload/CKRename-download-41199.html

• Where is the "recently opened files" list in Windows 8 Pro?

  With the new format of starting "tiles", I see no list of recently opened files - where is it?  File Explorer has recent locations, but it's just folders, not files.

  List of recently opened files - where is it?

  B.G.

  http://social.technet.Microsoft.com/forums/en-us/w8itprogeneral/thread/6946045f-4e7c-47cb-8240-1403495a8c19#2974d72b-34d7-4581-af1d-336d5801e529

  File Explorer has recent locations, but it's just folders, not files.

  In fact, I started my answer about it.   It is after all in Favorites (aka links).   So why not have Recent there too?  And why is not new just a hidden directory, but that you have to change your point of view to see?   ;  ]

  HTH

  Robert Aldwinckle
  ---

• Cannot be accessed reliably host file shares in Windows 10 Pro

  I can see my folder of Fusion 'Share' using the link on the desktop. I can't not reliable access shortcuts to the same or subfolders in my library of Docs not to (all from the file Explorer?) but some applications can and dreaded getting the "not found" dialog box. This means that I can't open files in sharing most of my applications making my Windows 10 VM basically useless (it is not the only virtual machine I use and have several that need access to the same share). Anyone else having this problem? I'm running the Mavericks as the host operating system, i7 quad core 16 GB RAM, NVIDIA GeForce GT 650 M 1 GB of VRAM (MacBook Pro 15 "Mid2012). I couldn't find a similar post in this forum. Any help will be appreciated.

  Hello

  As far as I KNOW, the following steps will send your host file-sharing problem.

  1 take a snapshot (so you can come back)

  2 uninstall vmware tools

  3. restart Windows 10

  4. install vmware tools

  5 restart Windows 10

  6. test if your shared folders work correctly now and if so, remove the snapshot.

  --

  Wil

• Tried to install downloaded like mozilla and google chat .exe files but recover corrupted file error!

  I just new laptop ASUS K42F with Windows 7 Home. Tried to install the basic downloaded such as Mozilla and Google Chat programs, but continue to get the "corrupted file error (more information go to nsis.sf.net/NSIS_error). How to remedy this situation so that I can download updates etc in the future.

  Hello

  There are many different factors can be attributed to your question.  It could be your network card, a problem with your ISP, Modem, or any other number of things.  Something happens during the download process that causes your files get corrupted.  We would like a little more info to help solve your problem.

  Are you connected via a wired or wireless?
  If you are connected wireless; you could try to connect with a wire and then try the downloads.

  Who is your Internet service provider, and what kind of equipment do you use to connect to their service? 

  You may have a faulty modem.  You can call most of the suppliers and ask them to test your equipment/connection to see if it is the problem.

  You have other computers on your network?

  If the answer is "Yes"; do you have the same results as the download of files on them?

  All type of internet security applications or third-party firewall you use?

  If the answer is "Yes";  try temporarily disabling them and download your files.

  You are connected to a router?

  If you are, try to connect directly to the modem and see what kind of results you get.

  If none of this helps, please post your hardware specs so that we can give you more troubleshooting steps

• Corrupted file... Trying to install my epson Stylus printer 610. Have a LENOVO XP (with currently installed sp3) 32.

  I just sent you a 'response' to my answers... but it came back as undeliverable.  When I accessed the site... I don't see my display problem.  I tried EVERYTHING to get this printer (or any printer to work.  I tried all the basic elements.  Uninstall, reinstall, remove all printers, install updated windows xp3, received all the drivers updated to EPSON.  And now I tried to do what was suggested.

  The USB drives were works very well with my Microsoft Mouse, etc... until I uninstalled all 7 of my USB HOST controller drivers.  See the previous information in my other post.  (I apologize... I've never used this show.

  I worked on this problem REALLY for the more than 40 home... several times.  I even bought a new printer, thinking that there was a problem with the replacement printer.  The printer works fine.  There is a WIN XP driver or another system file that is corrupted.  I walked into the registry in the past... but can't do it without a detailed help, I know what happens if you screw this place.  I can't afford the $150 to take this in to someone I do not trust to fix.

  I know that there is someone out there who can help!  I am familiar with troubleshooting and computers... but I am an old Gal BACK base...

  I appreciate anything anyone can do to help.  Here is my answer to that I tried some tips based on this card.

  Kind regards

  c

  Re: I can't get my epson Stylus 610 printer to print with my computer laptop lenovo, win xp 32. The printer was working fine... had a replacement and will not be printed by the USB port.

  TO: 1 recipient 1

  CC: 1 recipientYou 1 more

  CCI: recipientYou

  Show invisible characters

  Message reported

  Monday 6 February 2012 13:33

  I uninstalled all the controllers host USB 7 I had in Device Manager.

   

  After the system restarts, I got the following errors... that I get whenever I try to install my printer:

   

  1. "the software you are installing for this hardware INTEL ICH8 family USB host controller-2830 has NOT passed windows logo testing to verify its compatibility with windows XP.

   

  second message:

  There is a problem installing the USB controller.  An error occurred during the installation of this device.  Cannot install the drivcer because it is not digitally signed or not signed in the appropriate manner.

   

  To remind you.  This printer was working properly on this computer for several years.  I have a LENOVO T61 running on Windows XP
  32-bit system.  I don't know that somewhere there is a corrupted file...

   

  I'm pretty good at technical things... but there is here a file that is beyond my ability to get to and change on mine.

  Any other suggestions?

  Respectfully,.

  Cheryl

   

  The simple things in life are the most important live - laugh - Love Cheryl

  De : Microsoft Answers * address email is removed from the privacy *>
  To: * E-mail address is removed from the privacy *
  Envoy: Monday, February 6, 2012 07:06

  
  Topic: I can't get my epson Stylus 610 printer to print with my computer laptop lenovo, win xp 32. The printer was working fine... had a replacement and will not be printed by the USB port.

  	YOUR PROFILE | Frequently asked questions
  Hello petersonc2c: Your question on the Microsoft Answers Site received a response: Question I can't get my epson Stylus 610 printer to print with my computer laptop lenovo, win xp 32. The printer was working fine... had a replacement and will not be printed by the USB port. Response Hello 1. do you have similar problems when connecting other USB (Universal Serial Bus) devices to the computer? 2. What is the exact error that you receive when you connect the printer to the computer? Method 1: Try the troubleshooting provided in the link below steps to solve common problems with the printer in Windows Printer in Windows problems http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows Method 2: If the step above does not help us to diagnose the problem, uninstall the [Universal Serial bus] USB host controller drivers and restart the computer. Let Windows install the generic drivers and then see if it helps you to solve the problem. (a) Open Device Manager by clicking the Start button (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. (c) search the [Universal Serial bus] USB host controller device, right-click on it and select uninstall. (d) restart the computer. (e) to restart, Windows XP must re - install the drivers automatically.   Your next steps *. This response answered your question? So let the community know! [Mark this answer as your answer]

  This answer was helpful? Give the author a few congratulations!
  [Vote as helpful]

  You want to unsubscribe from this thread?
  . Click here to go to the thread
  . In your original question, click 'change '.
  . In the editing window, uncheck the "notify me when someone replies to this question.

  * You will need to enter your password first, but when you get to the thread, you will see that your action has been automatically saved.
  Please do not directly respond to this message. If you do not sign upward or feel that you have received this email in error, click here to remove your email from Microsoft Answers.
  Update e-mail settings .   Privacy policy |   Code of conduct
   
   

  a message about this yesterday.  I got response, but could not answer.

  Here are things I tried.  I've tried everything else.  I am convinced there is a corrupted file, but it's beyond my ability to find and replace.  I could really use help... This printer has worked for more than three years.  The ports worked with other devices until I uninstalled all 7 of my USB HOST controller drivers.  Now my logitec mouse (wireless) no longer works.

  Hello petersonc2c,

  Connect the printer to another computer to check the issue.

  Best to contact the ESPON support the likely problem with hardware that can be set on this forum.

• Corrupt files on Windows XP and disturbing call from the technician PC Doctor in India.

  Please explain how to completely remove the corrupted files from my computer that uses Windows XP Media Edition. I had the computer erased completely, but the technician put the files in question on as thought that I might need them. I do not understand the relevance of keeping these files on my computer or if they can affect other programs. I am concerned also a call today from PC doctor of the assistants of the India who suggested I have delete the files and what it would cost for them to do etc. I do not understand how they established the fact that I had these files or how they looked at my phone number. I found their intimidating tone and want to know if they were probably hacked my computer. Why not delete those files myself without having to pay someone to do it? Please give advise me on this if possible because it is worrying me and make me feel insecure when using the computer in question. Thanking you in advance.

  Call PC Doctor is a fraud, and many people received such calls.  If they still call it, hang up immediately.  For more information, please see hear about "Virtual PC Doctor?" in the forum Windows XP security, privacy, and user accounts .

  How do you know that your computer has corrupted files?  Someone he said you look in Event Viewer?  It is quite normal for any Windows computer display hundreds of errors and warnings in the application log in Event Viewer.  They show no corrupt files.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Urgent... a file in the system registry is corrupt... Windows will not start

  Hello

  It's George who has just encountered a problem with my Sony Vaio laptop last night. My priority is to find the superior application test which is located in the desktop of the computer.

  The computer has had problems with a google redirect virus which all the analysis programs antivirus could not detect, and last night, the computer stops after a power failure and was not able to start the windows program.

  The computer will start, but he's going to ask me directly with a message to choose three operating systems which is the Recovery Console, "not to select this [active debugger], and Windows xp home edition.

  Nothing in the menu advanced options of windows would work even safe mode. I was fooling around in the recovery mode, and I have reason to believe that the system registry is corrupted for windows.

  I have trie offered to the http://support.microsoft.com/default.aspx?scid=kb;en-us;30754 method

  How do I recover from a corrupted registry that prevents Windows XP startup

  This article was previously published under Q307545

  , but I don't have a windows boot cd, so I couldn't continue.

  I'm looking for more help from the world wide web.

  My superior applications are due within a week and help would be greatly appreciated.

  Thank you for your time

  sincerely

  George

  If you want to, you can also do another type of bootable CD, and usually, you will be able to simply copy your important files on a USB key, and then on another system.

  Here's an idea:

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.org/download.html

  On the left, click on download, scroll down, choose the most recent version the download link is a little hard to see and they sometimes change the location of the download link, then you might have to look around her.  Today, it is at the bottom of the page, above the drop for older versions and looks like this:

  Hirens.BootCD.13.0.zip

  Beware of the other links on the page to other types of downloads for other types of CD - be sure that eventually you will download the latest version which is now a file called:

  Hirens.BootCD.13.0.zip

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Resource protection Windows corrupted files but unabel to rectify some of them was

  Hi everyone,

  I am a newbie for now.
  Just bare with me if this post shoulb be in another place.

  After running sfc/scannow on my vista ultimate result was: Windows resource protection found corrupt files but was unabel to correct some of them.
  Tell me what files are not fixed. It does not give me a solution, not that I can see.
  So I can't wait to find out how to fix them, and I count on your cooperation.

  I'd really appreciate your answers.

  Hey,.

  My problem is now solved thanks to those who helped me.

  I borrowed the CD from my friend and good took me some time, things are back to normal.

  I have another problem, but it will be another thread.

  Thanks again.

  Michael