My new windows 7 do not allow to install my Canon laser printer.

Similar Questions

• The installer of Windows Vista is not allowing to install or uninstall programs and my laptop came not with a CD/DVD installation, what to do?

  A few days ago I had some problems playing Halo 2. The program itself has suggested that I have reinstall. So, I uninstalled Halo 2 without incident. However, during my attempt to reinstall Halo 2, I received the following Message: redists\vcredist, msi: the Windows Installer Service could not be accessed. This can occur if Windows Installer is not correctly. Contact your support team. Click Retry to try to complete the step failed, or click Cancel to cancel the installation.

  An error occurred when copying files in the background. An unexpected error has occurred while the application was copy files to your computer. Please try to reinstall the game, or contact customer support if that does not solve the problem.
  After contact with the teams of tech games Halo wasn't any help, solution phone a 1-888-xxx-xxxx, a refund of my game. I am bypassing the conversation that happened because the individual basically blew me off the coast. Run the verification tool file system, basically said that I had a corrupted file, and you run the recovery tool. I did this, but without success. I tried to research on issues such as the best of what I know how, only to discover that I need to use the Setup Windows Vista Home Premium CD/DVD. This is another problem. When my wife bought this laptop, she received only a couple of recovery disks. So with my limited resources, I'm in this river with pots of Earth on one side and on the other hippos and and a thumb in a plum for a paddle.
  I am in great need of a useful solution.
  Thank you...

  Hi Jimmie,

  Given that you are facing problem installing Halo 2 and receives Windows Installer errors, to start with, you can try the following steps and check if it helps.

  Method 1:

  Try running the fixit provided in the following article and check.

  Diagnose and solve the program installation and uninstallation problems automatically

  Method 2:

  You can also try the steps in the following article and check if it helps.

  Problems installing and uninstalling programs on Windows computers

• I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.

  Application of program compatibility does not start

  I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.  What gives?

  If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.

  Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.

• Windows 7 will not allow not a program Windows 95 must be installed

  I have an old game called "close combat" that Windows 7 does not allow me to install. I tried to use the troubleshooting option in Windows 7, but it wouldn't work. Any ideas? It is designed for Windows 95

  ------------------

• Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

  Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I want to install lightroom 6. I have Windows 7, but I get a message that Windows Vista is not allowed.

  I want to install lightroom 6. I have Windows 7, but I get a message that Windows Vista is not allowed.

  Hello

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare

• Internet security Windows 7 will not allow the installation of Flash Player 17 update

  Internet security Windows 7 does not allow the installation of the update of Flash Player 17.  I tried the direct installation using the IE_AX update without success.

  The procedures described in the last link enabled the update of Flash Player be downloaded and installed.

  It is regrettable that Windows IE seen Adobe as being an unreliable Site and requires a temporary user disable the security settings for the update to proceed.

  Thank you for your help.

• Why my office worsktation with Windows 7 professional not check and install updates?

  Why my office worktation with Windows 7 professional not check and install updates?

  To resolve this problem, remove the computer from the domain, and then join the computer to the domain.

  To do this, follow these steps:

  1. Use a local administrator account to log on the computer.
  2. Click Start, right-click computer, and then click Properties.
  3. Click Edit settings next to the computer name.
  4. On the computer name tab, click change.
  5. Under the title of Member of , select the workgroup, type a workgroup name, and then click OK.
  6. When you are prompted to restart the computer, click OK.
  7. On the computer name tab, click change again.
  8. Under the title of Member , select domain, and then type the domain name.
  9. Click OKand type the credentials for the user with permissions in the domain.
  10. When you are prompted to restart the computer, click OK.
  11. Restart the computer.

  Kind regards

• Downloaded windows 10 but not able to install that, due to a problem. now m by downloading again n it's show error 80010108

  Original title: update windows

  I downloaded windows 10 but not able to install that, due to a problem. now m by downloading again n it's show error 80010108. pls help me.

  thanku

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Windows is config not download and install the drivers on windows 7

  Original title: USING WINDOWS UPDATE

  Windows is config not download and install the drivers on windows 7 please help.

  [Tip] Customize the Installation of the driver software from Windows Update device

  hope that helps.

• Windows 7 will not let me install my Kodak Digital Camera C875 camera.

  Someone can tell me why Windows 7 will not let me install my camera, worked very well in Visa, any help out there?

  Original title: Kodak Digital Camera C875

  The best way to manage old cameras that have compatibility problems is not to connect the camera to the computer, but rather to remove the memory card from the camera and use a desktop card reader to make transfers.

  If your computer lacks a built-in card reader, you can buy very cheap () USB card readers

• my printer is a HP CP1700 and Windows 7 does not recognize that it is able to print 2 sides

  I just bought a Dell Inspiron.  It works very well except for my printer.  My HP color inkjet CP1700 printer is able to print 2 sides.  Windows 7 does not recognize that it is able to print both side and does not give me the option to enable printing two sides.

  Did you download the drivers from the HP website or just use Windows Update? Try using the software from here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=33110&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=33103

  I hope this helps.

• New windows program does not open in front

  I'm having a problem with Windows 7 not allowing not new programs that I begin to open at the front.  This happens not all the time.  Most of the time system works very well, but I've noticed when I have several windows open with several programs all running at the same time, he decides to take action and new windows will not open in front.  I have an external display connected to my laptop Dell Precision.

  When this happens, I notice Outlook seems to be dominate what he won't let any other window open in front of him, so I have to in order to see the other windows.  My Adobe programs do the same thing, IE. Photoshop, dreamweaver, illustrator, etc.

  When it happens, I also tried the option tab of the window to scroll through open windows and select the one that I would have in mind, but even if I can scroll through windows, when I stop and select the window I want to work on, he won't come to the top.  It's VERY frustrating when I work and a small window opens behind the window, I'm working on and I can not select the prompt window so it freezes ultimately my job because I can not move the program window, because an open window that I can't get to.  Is an example, you are working on a file and you want to save, you click on save and the dialogue window opens behind, asking where to save it to.  You can't get to the prompt window so you cannot tell him where to save it and can not minimize the file you are working, therefore, stop the entire program, hoping that it backs up automatically and pick up then from there.

  When this happens, the only way I can fix it is to restart my computer.  I tried settings regedit to fix it and those who did not.  Any help would be appreciated.  It is difficult to diagnose the problem, as it rarely happens so I can't recreate the environment in which he begins the questions.

  Hello

  Please contact Microsoft Community. I understand most of the time when you open a new program it does not appear at the top of the screen. This can happen due to the entriesor of incorrect registry due to corruption in the system of Windows. file So I will help you solve the problem. So I will help you solve the problem.

  Please follow the steps mentioned below:

  Step 1:
  Start your computer in a clean boot because it allows to start the computer with the minimum set of drivers and startup programs and check if that helps. See the link below to run clean boot: 
  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135  
   
  Note: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Step 2:

  Check the registry settings if there are all variations of the default value , change default and check if the problem is resolved:

  1. Press Windows + R, type regedit in the box open called to run and click on ok.
  2. Open the key: HKEY_CURRENT_USER\Control Panel\Desktop.
  3. Now in the window of the registry editor in the pane right, you will find the keys to the foreground Flash Count and foreground Lock timeout.

  Check out the links below and check the default values on your computer. Check if you have the same values as shown in the links below:

  ForegroundFlashCount

  http://TechNet.Microsoft.com/en-us/library/cc957205.aspx

  ForegroundLockTimeout

  http://TechNet.Microsoft.com/en-us/library/cc957208.aspx

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  If the problem persists, then move to step 2.

  Step 3:

  Let flow Sfc and check as it helps to find corruptions in Windows system files and restore corrupted files. Please visit the below mentioned link to run sfc:

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Hope this information is useful. Please get back to us for assistance.

• Remote Desktop Windows 7 does not allow me to enter a field

  I have a win xp and a host of windows 7 PC, they are not on any field.

  I have a VPN access in the work.

  When I start remote desktop on the XP PC I find myself with a login screen to the remote computer where I can type in my work to logon, the password and the domain.

  On the (new) windows 7 PC, I don't get anything that will allow me to type in the field.

  I start with the credentials of my home PC and it has a "change user", but that gets me only to one PC House accounts.

  I looked in the options and tried a few things, but no joy. There is no gateway Office remotely. I'm in the VPN and can access things like proves it the XP box.

  I can start vmware and run an XP box on it and that gets me in, but it's so backward...

  What should I change in win7 or remote desktop to get this working?

  Thank you

  Martina

  Never mind.

  It's a bit stupid, but if I type in domain\logon as a login and password to work it actually works.

  sigh

  Martina

• 20.0.1: file == > new window & private in new window only will not open then Firefox will not stop running when the application is closed

  Although nothing seems to happen when clicking new window or new private window, there seems to be some process started because when I try to close Firefox and reopen it, I get an error message saying that Firefox is already running. My only option then is to stop the process through the Task Manager. I tried (many times) to uninstall and reinstall.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox