Toshiba Tempro has stopped working

Similar Questions

• The backlight on the Toshiba 32W1333DB has stopped working

  I have Toshiba 32W1333DB, the backlight on the tv stopped working, if I shine a torch on the screen I can still see everything, after watching videos on this problem, that I could find was that it could be the backlight inverter.

  Can someone advise this has a TV, the TV works directly from the CPU, it is more than likely that the CPU has a defect, or is it possible that all LED bulbs have blown, any help or advice would be appreciated.

  Thank you

  Posted by ryanbern
  

  I have Toshiba 32W1333DB, the backlight on the tv stopped working, if I shine a torch on the screen I can still see everything, after watching videos on this problem, that I could find was that it could be the backlight inverter.

  Can someone advise this has a TV, the TV works directly from the CPU, it is more than likely that the CPU has a defect, or is it possible that all LED bulbs have blown, any help or advice would be appreciated.

  Thank you

  These models use LED backlight, so there is no inverter integrated in the game. Probably something wrong with the LED or the power supply.
  Suggest that contact Toshiba customer service for further advice.

• Portege R500 - Flashcard Toshiba has stopped working

  Hello

  I get this error "Toshiba Flashcard has stopped working and will be closed" when I start my laptop Portege R500.
  What is the cause?

  I'm running Vista and my PC continues to run even if it does.

  See you soon,.
  Elty

  Hello

  It's not easy to say what causes this problem.
  In most cases to other parts of the software may affect the functionality of different applications.
  For example, my flash card stopped working after Vista ran some updates.

  I simply removed the old VAP (value added package) of the system.
  I cleaned the registry and the system using CCleaner (free tool) and reinstalled again the VAP.

  Now everything works fine.

  I think you should try the same too.
  Remove the VAP and installed as the new VAP downloaded from the page of European driver of Toshiba.

  Check it out!

• ConfigFree has stopped working error on Satellite L850-13R

  Can someone help me with this and also tell me about.

  Everytime I turn on my laptop I get notification message "Configfree has stopped working"... "try to get the solution on the internet... "and I don't know what is the problem and how to fix it.

  I have Toshiba Satellite L850-13R, i7, using Windows 7 Starter.
  Can someone tell me what is this error and how to fix it? and, also, my laptop is very slow since I got these notifications. I scanned and there are no threats found...

  Thank you in advance...

  I m not very well why the Utility of Toshiba ConfigFree has stopped working, but I can tell you how you can solve this problem.
  I think simple installation ConfigFree could solve this annoying problem.

  How the product?
  First download easy all the utility driver page ConfigFree Toshiba UE
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
  Please pay attention to the version. There is a ConfigFree utility for 32-bit system and 64-bit.

  After the ConfigFree utility has been downloaded, uninstall the previous software installed.
  In Control Panel-> programs & features, you should find the ConfigFree
  After the tool has been uninstalled, restart the laptop
  Then unizip the package downloaded and start the installation.
  Reboot once more.

  ... That's all :)

• Toshiba notebook registration reminder has stopped working

  Hello

  everytime I open my laptop it displays "of Toshiba notebook registration reminder has stopped working".

  How can I fix it?

  Hello

  Should you the registration reminder? I put t think so, if you have already registered your laptop

  Way the easiest is to disable you the program from startup to navigate to start > run > msconfig and select start tab. You can then search the registration reminder and uncheck the box.

  After the computer restarts it shouldn't t appears more. Can you confirm this?

• Toshiba Flash Cards has stopped working...!

  HI :)

  My problem is:
  When I start my laptop an error message pops up saying: "Toshiba Flash Cards has stopped working".

  What is Toshiba Flash Cards? and what I will do with this error?

  Also, is the utility of flash refers to the Fn key card in the keyboard? If it is, so the problem above will not let me use the usefulness of this key "Fn".

  Thank you: x

  Hello

  Software Toshiba Flash Cards belongs to Toshiba value added package (VAP) and it controls the functionality of the FN button too.

  If this service has stopped working so I recommend if you allow it.
  For this you must have access to the services of Vista:
  -Go to the Start Menu
  -In the white line (search) type services and press ENTER.
  -Click on continue in the UAC prompt, (if it is necessary to provide the password for administrator approval)
  -Search for Flash or PPV cards or similar
  -Right click on the service if you want to disable or enable, and click Properties. You will find an option to enable or disable this service

  Also on this page:
  http://www.Vistax64.com/tutorials/59910-services.html

  But if this will not help you then need to reinstall the VAP.

• What can I do this message-"Toshiba DVD Player has stopped working"

  Hello

  My DVD drive used for good work... and then I installed iTunes.
  He then worked for a while, but only by using "Run as Administrator".

  After a few weeks I started getting the message "Toshiba DVD Player has stopped working".

  I uninstalled iTunes - and uninstalled and then re-installed DVD player - but it still doesn't work!
  Any solution please?

  Thanks in advance for your help.

  Ms. Q_reeus

  My solution is to remove a Toshiba DVD drive and install VLC player. You can get it for free.
  It can play all video formats, and you don't need additional codecs.

• Toshiba Service Station has stopped working

  Window will appear indicating
  "Toshiba Service Station has stopped working"

  It offers two choices: check online for a solution and close the program
  close the program

  When you select check online nothing seems to happen... the move dashes indicating
  something does occur briefly then nothing... .no window opening, no report,
  and yet the information station continues to not work.

  What happens here?

  Problem event name: CLR20r3
  "signature 01: toshibaservicestation.exe"
  "" 02: 2.1.3516.17155
  ««03: 4 a 899406»»
  and so 9 signatures.

  You know what, before starting to look for the solution and spent hours playing that I advise you to install the OS by using HARD drive recovery option. Reinstall the OS and check if everything is working well with the factory settings.

  In the past, I did several times and immediately after the new installation, everything worked fine.

  Who knows what you have done with your machine. All we has own way to configure and optimize the operating system to use. Maybe you have turned off something. Who knows? It is not easy to offer a concrete solution to this.
  Reinstall the OS and verify functionality without changing anything. I am 100% on it will not work properly.

  By the way: what model of laptop do you have?

• Toshiba Disc Creator has stopped working Error Message

  I have a Toshiba Satellite P305D-S8834 and tried to burn a CD using Toshiba Disc Creator v.2.0.1.3. But I kept getting an error message saying "Toshiba Disc Creator has stopped working." and could not properly burn a CD. Although I contacted Toshiba support, I couldn't not useful information. Advice would be appreciated.

  Try to remove and reinstall Disc Creator. Install the latest version from the Toshiba site.

  Also update the BIOS and make sure you use quality such as TDK DVD discs. Disks unnamed wear easy and use of dye at low cost.

  Also try to remove the UpperFilters and LowerFilters:
  http://support.Microsoft.com/default.aspx?ID=314060

• Toshiba Service Station has stopped working - Satellite L500 PSLS0A

  I have a Toshiba Satellite L500 PSLS0A-019002 with Windows 7 Home Premium pre-installed that I received as a gift from two months ago.

  Apart from some do not like the weird and useless (to me) Windows Vista / 7 functions, the Office I get the error message "Toshiba Service Station has stopped working" who proceeds to find a solution, but apparently never find one because this situation repeats itself whenever I start.

  On another thread in the forums of Toshiba, someone suggested to download the independent utility called Toshiba Service Station and put it back. I see no such utility listed on the page of downloads for my Toshiba model. Because I don't know what the Toshiba Service Station did (unless it goes by another name - Toshiba Bulletin Board perhaps?), I don't know what causes the error or how to fix.

  Does anyone have a more accurate solution?

  As the user above has said, you can remove it. It is not important utility and does not have a big problem in your system.

• Toshiba Service Station & cfFncEnabler has stopped working

  From the start I get 2 error messages.

  Firstly said that Toshiba Service Station has stopped working and then cfFncEnabler stopped working. Windows looking for a solution and will notify you when a is found.

  Close the program.

  Any ideas as to why and what can I do about these?

  Hello

  Hmmm maybe there is something wrong with both applications
  In such cases, it s always advisable to reinstall applications recommend

  The Toshiba Service Station is a stand-alone application and can be downloaded from the Toshiba driver page
  The cfFncEnabler seems to be a program that controls the FN keys.
  So, you will need to reinstall the tools that control the FN keys

  As far as I know this is a utility of Toshiba Flash Cards and VAP.

• Utility supervisor password Toshiba has stopped working properly.

  has stopped working properly.

  An update is available that solves this problem.

  Press or click on to download the update on the site of Toshiba Corporation

  Download instructions

  1. Tap or click run or Open. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the installation wizard.

  It is a Toshiba program, so the place to get answers to this topic would be Toshiba, not Ms.

• Toshiba 320 GB external USB HDD has stopped working

  Hello

  Recently this evening my external hard drive has stopped working. I can start it and the blue light shows, but it seems that the arm of reading or the mechanical part is stuck or does not start. It has a very low and repetitive clicking noise.
  Before I used to get a strong enough * Click * when starting and now nothing. Nothing does load in windows either, and remains undetected.

  I thought that I could send to repair if it's arm which is broken or needs other than tighteneing as, it's a pretty desperate situation that recently, I cleaned my computer and used the external hard drive as back up, with all of my work for the last 8 years on this subject...

  And I can't afford a recovery of data of 300 books, either.

  null

  Possibly the HARD drive died completely. I mean it might be possible that a head crash could cause this problem.
  My HARD drive died in the past, it was a laptop internal, HDD, and before that the HARD drive is dead, I noticed a strange rattling noise.
  After a restart the laptop the drive HARD was not accessible
  Well, HARD disk crash is not an uncommon problem and it always happens
  So, in most cases, it s also should back up the data twice. That is to say: on DVD, CD, etc.

• TEMPRO service stopped working

  My computer has recently (and after any knowledge installed software changes) began to show a box labeled BACK "C:\Program Toshiba Tempro\temprolaunching.exe" indicating "cannot start Service TEMPRO. Press a key to continue. ». TEMPRO alert has stopped working.

  I tried to solve the problem by restarting my computer and software update tempro, but nothing is helping.

  My computer is a Tecra M10, S.O. Windows Vista Service Pack 1 (Spanish version).

  Any suggestion?

  Best regards.

  Did you remove version preinstalled and installed latest version available after restarting the laptop?

• Utility power management Portege A100 has stopped working

  The power management utility has stopped working and when I try to save the profile of Laptop/portable power management screen control panel I get a message saying that the power cannot be defined as two revision levels are incompatible.

  I tried to remove and reinstall the Power Management Utility and utility Toshiba but when reinstall I get a fatal error notice and the 0x51A error code. Can anyone help please?

  I suspect that this problem could have been triggered by an update XP or Norton Internet Security.

  Hello

  Maybe the registry is confused upward
  Try to clean and repair the registry using CCleaner. It the free tool.

  Firstly uninstall the energy saver, then clean the registry.
  Download page of the European driver Toshiba Portege A100 Win XP tools and drivers.
  You will need:

  Common module-> must be installed first!
  Energy-saving

  Good luck