My printer does not play nice!

Similar Questions

• WRT300N and Asus Eee PC 1002 H does not play nice-Wifi N

  I have an Asus Eee 1000 H and 1002HA Eee. Both are running XP. I have a linksys WRT300N. All are supposed to support Wireless N. I got the 1000H running to 135 Mbit/s, but my most recent 1002HA runs at 54 Mbps, even right next to linksys. These are the settings of the WRT300N.

  Network mode: mixed - if I select wireless only, it does not see the SSID but will not connect do not.

  Radio band: wide angle: 40 MHz channel

  Standard channel: 1-2, 412 GHz SSID Broadcast: enabled.

  I use WPA with TKIP. Key renewal: 3600 seconds

  Beacon interval: (default: 100 milliseconds, range: 1-65535) DTIM interval: (default: 1, range: 1-255) threshold of Fragmentation: (default: 2346, range: 256-2346) RTS threshold:

  The driver installed is the version of the driver 7.6.1.149.  This is the 1002H Wifi driver

  Well, I tried WEP and WPA, and both do not work.  But I went to WPA2 and that worked...  I give up.

• iOS (Final) 9.3 and the hue does not play nice with Siri

  I have not had any problems with Phillips Hue/HomeKit/Siri all seven betas of iOS 9.3 Although.  However in the final update, which also brought an update hue shortly after, I can no longer use Siri voice commands to operate my lights.  I have everything reset, checked the lights and scenes, but Siri tells me that nothing is connected.  Everything works manually but nothing using Siring I suspect HomeKit.   Anyone see a problem?

  Everything started working again.

  Never mind!

• My printer does not print the words.

  I have a HP Photosmart.  My operating system is Mac OS X 10.6.8 version.  I woke up this morning and my printer does not print the words, only the outlines of the text boxes.  It's the same thing on my other computer that is running Windows XP.  I changed the ink cartridges.  When I ran the alignment he printed the blue boxes around the page and black boxes on the right and left sides.  I also printed the word IMPORTANT! but that's all.  I ran a print quality Test and it printed blue, red and yellow stripes horizontally and vertically, thin and thick, "BOLD" and vanish.  He also printed them in parentheses and nothing in the parenthenses.  I uninstalled the printer on my Mac and reinstalled.  I got all the updates also.  This did not help.  I tried to get the updates for the printer by using the application update on the printer, but he said that none was necessary.  Help, please.

  Thanks for your concern, but I threw the thing in the trash.  It was one of your printers 'free' which uses a very expensive ink.  We have collected these printers over time so I opened one I got "free" last month.  I hope it lasts over a year.  Will you be playing with programming and I need a new driver soon for this one also?  Sorry to appear cynical, but at the moment I don't have any different attitude to the project.  I am informed that I will need a new driver for the operation of our other printer and I don't understand what was wrong with the old driver.  We did nothing.  It should work!  I just want to print, words!

• Hello printer does not appear in the list of IOS Printer Options

  I have a home network with a router of Time Capsule.

  I connected my Cannon MX920 wireless network.

  The printer worked very well for my MacBook Air, my iMac, my Windows laptop, 10, my iPad and my iPhone.

  There are no known pending software updates to devices.

  I connected my HP OfficeJet 6500 (E709a) for the MacBook Air via USB and it works very well.

  I installed on the portable Windows 10 Hello and I can print to the printer OfficeJet @ MacBook Air laptop Windows 10 and the iMac (and of course the MacBook Air) very well.

  In Safari / Bookmarks / Hello on the MacBook Air, ONLY the Cannon printer is listed.  The OfficeJet directly attached via the USB port does NOT appear.

  My QUESTION is how can I make the printer OfficeJet @ MacBook Air appears as option in the printer Options / recent printers of dialogue so I can print to it from my IOS devices?

  This seems to be a pretty simple configuration problem, and I don't see the need to spent $ 20 on the App Store to make it work.  I see some comments along the lines of this problem, but the solutions are quite difficult to follow and seem to depend on having the printer appear in Safari / Bookmarks / Bonjour list.

  I'll appreciate any solution (or explanation as to why it isn't a).

  Hello DevGuy,

  Thank you for reaching out to the Community Support from Apple. I know how useful it can be to have all your devices on the network with a central printer, and I'd like to help offer a glimpse into what could prevent your of you using to print to your HP 6500 iOS devices.

  In order to print from a device iOS, the printer must be connected to the same Wi - Fi network and supports the Air Print feature. After some research, it seems that the 6500 HP does not support this feature directly. You may be able to find a solution based on HP in the App Store app, but this printer does not have Air Print capacity based on support documentation, that I could find at HP.

  For more information about known printing of Air and a list of compatible printers, have look at this article: About AirPrint

  If you have any other questions, please help again. The entire community is here to help.
  -Best regards

• 12.4.2 iTunes does not play songs.

  I have iTunes on Windows 10 12.4.2. None of my songs will play. They get stuck at 0:00. If I try to go manually it still does not play. I tried to shut down and restart. I also tried to uninstall and reinstall. Nothing has worked. Please help me. Thank you.

  I solved my problem. Apparently, I had questions General audio so I ran "sound problems."

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• Firefox does not play HTML5 audio

  My Firefox installation (v33) does not play HTML5 audio.
  I am referring to audio tracks (MP3) you can listen to on your personal Google Reader. The stream does not start, there is no time of the track being filled.

  -Youtube HTML5 player works great both for Audio and video
  -J' tried Incognito mode (without cache and cookies)
  -Tried restarting without Add - ons (I use Adblock and other stuff)
  -Tried to restore Firefox.

  None of these permits.

  -V38 IE11 and Chrome, the browser listen very well
  -A clean Firefox (on my virtual machine, for example) very well disseminate

  Any tips?

  EDIT: SEW I'm touched by it? https://Bugzilla.Mozilla.org/show_bug.cgi?id=911837

  You can file a bug in the Mozilla bug tracking system: https://bugzilla.mozilla.org/ (see: https://developer.mozilla.org/docs/Mo.../Bug_writing_guidelines)

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• My episode does not play in the store

  My episode is not playing in the store, but it's as a Subscriber.  The circle of game/load just continues to blink.

  My podcast is connections with Craig Sherman.

  Your feed is at http://feeds.feedburner.com/ConnectionswithCraigSherman

  There are three elements in your workflow: only the third is a media file playable. Appears when subscribing but does not play in the store within a reasonable time.

  The URL of your file is a Google Feedproxy one and if it works well in a browser it redirects to a URL of Google Drive. Google Reader is not a place appropriate for your media files - it has always caused problems and I advise you to find another host.

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.

• Hi my firefox don't like flash, it does not play vidio in youtube. it a big problem

  It does not play flash.
  If I try a slow firefox in 1 min one after that came like that of Pentecost somfink firefox
  "A script fail.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I'm on a mac and my printer does not print

  I'm on a mac and it sends the document to my printer (Hp Photosmart 4680 all-in-one), but the printer does not print. My printer worked fine and now it will not print. I'm doing something wrong. This has happened once before and I am frustrated with and left for about 2 days, I had tried everything I could think of, unplug the unit for an hour or more, uninstalling and reinstalling, checked ink levels they were very good. Then all of a sudden, he started working again. I turned on my computer and the printer, and surprisingly it comes to start printing. Does anyone else have this problem? If so what do you have? Or someone has any suggestions of what I can hurt!

  Thank you

  Make sure that your OS X is healthy:
  
  1. download and install OS X Combo Update.
  2. download and install the printer driversHP from Apple.
  
  Finally, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page (if you want).

  Do not connect your printer via a USB hub, connect directly to your Mac.

• Printer does not print not complete pages.

  When I give print command, the printer (I use MS Works), the printer starts to print a page and then, after a few lines, will be offline prematurely. The printer does not turn off. It sounds the signal that the job is done and ejects the sheet of paper. Maybe 5 lines are printed until the printer ends prematurely.

  Hi Davy40,

  I understand that you are having problems with your printer only give you partial pages, but acting like it printed the entire page. I'm sorry to hear what is happening, but I will certainly do my best to help you.

  I just need to ask you some questions to help you better!

  1. what model printer work?

  2. you are working with a Windows or a Mac computer?

  3 do you get errors when trying to print?

  4. how the printer is connected to the computer? USB or wireless?

  Once I have this information, I should be able to help!