My printer is not working properly

Similar Questions

• Printer does not work properly

  Hello

  I'm runnning a program as an administrator in my own session (not administrator). When I try to print a document with these programs, it is not printed.
  It's so strange to me... I think that the printer does not receive the order to print the document :/

  The printer is correctly installed, it works if I use another program to test (performed in my own user).

  PS: I'm sorry. I know that my grammar is not good, because Spanish is my mother tongue.

  Best regards!
  Luis

  Manu:

  I solved my problem. I logged in as an administrator user and I had to add the printer manually, because there is not any printer installed for the administrator user. Then when I logged in under my own user I tried again and the document was printed.

  Thank you very much!
  And sorry for my horrible grammar, but I'm still a beginner in English.

  Best regards!

• Panasonic kx-p2123 printer does not work properly

  I have a Panasonic kx-p2123 I've had for a while and it worked fine on my old systems op, I now have a computer win 7 that had no parallel port. so I bought a USB to parallel adapter cable, and who did not work at all. Then, I got a PCI with parallel port, he worked only a very little, so I had another card and installed. The printer works now sometimes and not entirely accurate. He will begin to work sometimes and print only a few lines and just stop, or sometimes if I turn the power of the printer and then turn it back on, the printer it will take off and print a page in its entirety. Somewhere, I had the idea that is uses port LPT 3 and if I change that it doesn't work very well at all. This computer has drivers for this printer and I have installed and uninstalled those several times. Also the Panasonic does not appear in programs, whence my HP. This is displayed in devices and printers.  If anyone knows what is happening, please answer, thank you Vernon

  Hi Vernon,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You have the printer drivers disk to install the drivers?

  Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  Thank you for details on the question and your efforts to resolve.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• What would cause two-sided printing is not working properly in Acrobat Pro and InDesign?

  I need help with a problem of double-sided printing that occurs only with a document created in InDesign, and then turned into a PDF Acrobat file. It is a simple single page 3, paper 8.5 x 11 with nothing weighs on the marges.5. I went to print it out on my Epson Stylus 7620 duplex, but it does not print correctly. It is printing page 1 on a single sheet of paper without even attempting to add the second page. Then it prints the third AND second double-sided pages. I looked to make sure that there is no box "print separate cover page" checked. I also made sure 'normal pages order' has been selected and not reversed. I checked to make sure that nothing was hanged on the page which may cause the printer to that there is an additional page between pages 1 and 2. I turned the document to Adobe PDF (for InDesign), but the PDF did the same thing. It prints 2-3 as a double-sided pages and page 1 on one page on a single sheet of paper. Obviously, I want 1-2 pages to print double-sided and 3 of the page into a single page. I called Epson, but they said that because other documents are printing correctly, it is not a printer problem, but Adobe software / printer box question, very probably in the InDesign document. I can't find. Has anyone else encountered this problem? Can someone help me with this?

  Using Acrobat Pro and InDesign in creative cloud. MacBook Pro running 10.11.4

  You'd better ask this question in the InDesign forum where more people we'll see.

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• My printer does not work. Error is bidirectional, support is disabled.

  WHATS TO STOP MY PRINTER WORKING IN WINDOWS 7, IT IS SAID BIDRECTONAL SUPPORT IS DISABLED

  Margarett salvation,

  Welcome to the Microsoft community. I see that the printer has stopped with an error message. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the printer?

  3. don't you make changes to the computer or the printer?

  Please provide more relevant information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Otherwise, here are some steps that you can give a try.

  1. Select start > Control Panel > devices and printers.

  2 - Click on the name of your printer, and then click printer properties.

  3. click on the Ports tab.

  4. Select the enable bidirectional support check box.

  5. click on OK.

  Additional information.

  Find and install the printer in Windows 7 drivers: http://windows.microsoft.com/is-IS/windows7/Find-and-install-printer-drivers

  Update a hardware driver that is not working properly: http://windows.microsoft.com/is-IS/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• Hello on the program is not working properly, please return the money to buy other best program and thank you

  Hello on the program is not working properly, please return the money to buy other best program and thank you

  A faulty program that has not been purchased Mali returned from four days

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• I think Firefox is getting worse, because there are many Web sites that does not work properly with it, while my other browser Google Chrome can.

  There are many sites, but I will say only 1 site because I have very bad memory, so here's the problem, Web site Furaffinity.net, search for his website may not work properly with Firefox, its advanced research, help and toggle the button description can be click but nothing happened after a click. However, my other browsers, Google Chrome and INTERNET EXPLORER horrible can work properly. I tried to fix it by resetting Firefox but it doesn't work.

  Thank you, and I take back what I said about Firefox getting worse.

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!