My problem is with the scanning. I can't use the charger of the scanner, it always scans go flat.

Similar Questions

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• "Error - a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner"while trying to scan using HP G4050 on windows 7

  A problem prevented the document are analyzed. Windows 7 - HP G4050 scanner.
  I have a HP G4050 which worked fine with Vista.  After the upgrade to Windows 7, I get the following error when scanning:

  A problem prevented the document are analyzed.  Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner.

  I get a different error during an attempt of an overview.  It starts to get an overview of the page, gets about 2 inches to the bottom of the page and then I get the following error:

  An error occurred when you set the properties of the scanner.  If another program is scanning, please wait to complete, and then try again.

  I downloaded the latest driver (and reinstalled several times) of HP with no luck.  No errors are recorded in the Application events.

  I'm going nuts trying to figure out this one!  Thanks for your help.

  BT

  Update:

  I finally had time to unplug the scanner, wait 60 seconds and then plug it again.

  Problem solved.

  Scan of stupid...

  BT

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• HP Officejet Pro 6830: Unable to communicate with the Scanner

  Printing is fine and just impossible to scan.

  I tried to solve the problem of scanner/copy of the measures:

  1. run a 'HP Print and Scan Doctor' to check

  2. click on 'Scan of difficulty' to identify the error

  3A through the steps with all green ticks, with the exception of the driver with a «!»

  4. with the result, I went and download the latest driver to update the scanner and also did a update system for you ensure that the printer is so far

  5. after the update I still get this message from the scanner "Unable to communicate with the Scanner" and when I press the button of scan/copy the printer only a "ding" sound occurs but nothing is scanning / copy

  Note: I brought the printer 2 months ago and this is the first time that's happened

  Hi @Flash1688,

  Welcome to the HP Forums!

  I see that you are unable to communicate with the Scanner with your HP Officejet Pro 6830 on Windows 8.1. I'm happy to help you!

  If you just try to make a copy with the printer, it works? You see on the screen of the printer error messages? Copy of Documents. Also, if you lift the lid of the scanner during the copy process, you see a light come ON and the scanner bar moving?

  In the meantime, please, try the procedure described in this guide, a message 'no computer found' for HP Officejet 6810 and HP Officejet Pro 6830 e-all-in-one printerand let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Can I use my charger Macbook W 29 with a USBC to lightning cable to recharge an iPhone 6 more?

  Apple has launched a new cable USB C lightning. I have a Macbook with charger W 29, I was wondering if I can also use this charger with a USB C to the lightning cable to charge my iPhone 6 Plus, with no risk of damage to the battery of the iPhone. Is there guidance from Apple or not experience from other users?

  If it sends not more then 5volts to the device it cannot harm him.

• How do I reselect the type to change.  I have a text template that I want to, but when I try to select it with the text tool always creates a new text layer.  How to change the type of the layer in my registered design?

  How do I reselect the type to change.  I have a text template that I want to, but when I try to select it with the text tool always creates a new text layer.  How to change the type of the layer in my registered design?

  OK, Bob. This give a try.

  First, open a new file and make sure the background is white, not on Transparent that I suspect you have currently defined.

  

  Then, type your copy. Your layers panel will then look like the top of this picture...:

  

  and when you drag the text on the image layer, it will look like the lower part of the sample above.

  You can then position the text layer with the tool move

• I have a split screen with the left part always my Wordpress site. I don't know how to get rid of him... Help!

  I have a split screen with the left part always my Wordpress site. I don't know how to get rid of him... Help!

  See:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Can I use a charger of lightning with an IPad 2

  Can I use a charger of lightning an IPad 2?

  Shipyard,

  I don't know is what a "lightning charger", but here is a lightning connector:

  

  

• Can I use a charger t shaped to replace my macbook L shaped charger?

  Last summer, I bought a MacBook Pro (mid model year 2012, I think). It came with the charger in an L shape, which now runs very bad and must be replaced. Can I use a charger of the same power T shaped? I really want to spend £65 for a product that has such bad reviews. By the way, what are the views of the people on the purchase of slightly cheaper Chargers on Amazon and similar sites? Want to save money, but don't want to take the risk of damaging my laptop!

  See you soon

  Should be ok.

• Photosmart B209a more: with the Scanner B209a problem...

  I've already read so many threads on the HP forum. No and then save me.

  I have win7 64 bit and B209a Photo Plus...

  My is simple: I have this pop up: "the HP imaging device is not found. Try the following steps. "etc. The steps do not work. Extended error information gives 8, [(1.0,-2147221502)]."

  I unstall this unit 8 times I reinstall delete %Temp%, but the problem persists, I have already addressed on delete and %Temp%, repair setup/scan/scan.exe and install. Tried the "fix it", but I can't find the file "bdp_scan". Nothing fix it!

  It seems that my scanning device was already installed before my installation. How to remove this old installation scanner?

  Thank you

  I solved my problem, NO thanks to HP. Thanks for me!

  HP support will serve only a consult...

  The driver has been corrupted, corrupt yourself, an incompatibility with daily updates of Microsoft, I do not know what upgrade but here is the solution.

  I changed the group from my home network to the public, that the public at home, that the printer was visible on the HP program. So I uninstall all HP programs and use the driversweeper to clean all.

  That, I install the complete program with the HP driver as administrator and in compatibility win mode 7 (as I said, I use win7).

  SOLVED by myself.

  HP abandons us, I have a high end of my time printer and don't bother HP (it's time laugh you!) HP CARE)

  You guys make a driver and programs more accessible Microsoft and compatible! Tha'ts started too much programming at the end as it is, is simply take the best, see for the snippet of microsoft that the discovery of your printer and install, when YOUR programs don't.

  Thank me (no thank you)

• ABP is blocking content from Ticketmaster, I tried to turn it off but it doesn't. I use Ticketmaster on my iPod, so I know that the problem is with the help of PBA.

  Tried different options of disabling with no joy. Don't know what else to do

  Try to start Firefox in safe mode. If there is no problem, then while
  a course in Firefox > Modules and delete the PBA. Then restart
  FF. If there is still a problem, Ad-Block can be reinstalled.

  ======================================
  

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Problem starting with the Satellite A500-134

  Hi guys

  My laptop is a few years and two months back, the battery has just stopped charging (death), but because of the work schedule, I didn't get time to replace.

  In any case, I was working on a report and took a 20-minute break and when I came back the laptop was turned off by itself and that a single led white light for the AC adapter was.

  When I pressed the power button the camera and light led light power which ends of the AC adapter / light turned on and at the end a dry stop the laptop with the power and the orange light battery light on. Orange light battery led was off after 6-8 sec.

  I tried again and again and the same thing is happening

  Can someone please tell me what is the problem that I really need to finish this report and I am lost.

  Thank you in advance for all your backup stream.

  Try resetting your laptop. Unplug the power plug, remove the battery and press the power button for 20 seconds. After leaving it for a while, only connect the power supply and try to start your laptop.

  What happens when you do this?