My running program, it shows a under vi on the screen all the time
Well guys, my program has a lot of void / vi
but only when I try to run something in my program
all the time the clay under vi appears on the screen
and the others do not...
I never see that happen, then why does it appear when I click Next?
How can I solve this problem?
Thanks for the help
In vi--> appearance properties windows--> customize
Click on 'close thereafter while initially closed' also if you need to be opened first.
Tags: NI Software
Similar Questions
-
My new iPhone shows up under devices in the sidebar of iTunes, but I can't find the summary screen
I googled several fixes, but none of them work. My phone appears under devices, but no summary screen. I just had on the phone yesterday and he restored the old phone. I want to be able to select certain playlist to have this phone, etc.. Summary screen was easy to show everything I needed to know or change. How to display summary screen?
Yes, I made sure I have the latest version of iTunes. Yes, it is connected via the port usb and visible in the devices. No, when I right click on the device it shows a summary option, just eject, restore, sync etc.
See the boxed area in my screenshot:
That's what you click on, not on the name of the device in the sidebar.
-
OK, so the point is around 2 specific games that I play with my friend, those Heroes of Newerth and League of Legends. The two I need to aprove make changes to the computer to start. Together with launch normally, but when it comes to load a game, I'm gambling or not my pc will fuction when the loading is complete.
The problems differ from a partial freeze with occasional spikes along the screen to a snowy screen and sometimes even a blue screen or a forced reboot.
I doubt that the problem has nothing to do with the required performance, especially when it comes to League of Legends. My pc is brand new and it can run the latest game call duty on high graphics with no problems at all and it is several times heavier on the required performance than the other two 2.
Any ideas what could be causing it and how can I solve it?
My pc runs on Windows 7 on an AMD Athlon II x 4 630 to 2.80 GHz proccessor 2 GB of RAM, the card mother M4A785TD-V EVO and a gainward gt 240 512 MB GDDR3 graphics card.
Thank you all for trying to help me.
Hi Apos,
Uninstall the game and reinstall it back by running the program as administrator and check if this is useful:
Steps to follow:
i. right click on the program
II. Select run as administrator from the list.
Uninstall or change a program:http://windows.microsoft.com/en-us/windows7/Uninstall-or-change-a-program
With regard to:
Samhrutha G S - Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
SecMon does not show an option to change the time of the Start/Stop event for 2011
Did someone met a hotfix or an update that will allow you to filter the events of CiscoWorks SecMon using the year 2011?
The last date, you can currently use 31 December 2010 which is fine for now, but we have generally set dates to view alerts that are not resolved during the last 24 hours, in case one of them slips through. As soon as we have more in January/February/March, fixing the date of December 31, 2010 will begin to take a toll on the server since it will have to query all the events.
Thank you
Cory
Cory;
Software maintenance ended on November 18, 2008; It was the last date to which release any software maintenance or bug fixes would be released.
November 18, 2010 was the last day to receive assistance through the TAC.
Scott
-
I installed the download Assistant and she show Acrobat is downloaded, but the program does not run or listed as a program. The only thing listed under programs is the wizard. When I click on it, it gives me just the possibility to download Acrobat again.
Charlesgreen123 after the installation files are downloaded, you can run the Setup program to install Acrobat. By default, the installation files are saved in your download folder.
-
How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.
Thank you!
Townes wrote:
I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!
Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.
I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.
-
Error when you try to run Quicken 2011: this program is not supported under XP
Win XP pro - Quicken 2011
I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP. What I do toget Quicken supported?
For help on Quicken, I recommend posting your question in the community live Quicken . The people there can help you better as we can in this forum of Windows. Boulder computer Maven
Most Microsoft Valuable Professional -
When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". I ran 6 different viruses, malware, rootkit, scans etc. everything looks clean, but 'start' is still there when I right click the executable files. How can I get rid of him? I tried the System File Checker tool, it didn't work. When I click on "Start" it is not now open applications.
Do not know if it is any help.
http://www.online-tech-tips.com/computer-tips/Windows-right-click-context-menu/
Be careful when you change the registry so... Make sure that you have backups.
-
the computer is configured to automatically run programs at startup detected
I have windows 7... computer running very slow when I start the pc, or even to open internet programs... don't have a full scan virus no nothing...
When I check the performance he said: convenience store has made some changes to your system.try to try the task you were trying to
do before.
and she said then in a pox: problems
the computer is configured to automatically start detectet and a yellow triangle with an exclamation point
could you please tell me how solve the problem... thank you so much manual
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Peformance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
back program does not work under XP
When I try to open this accounting program, the command window opens and a text flashes on the screen, then it goes to a blinking cursor. This program works very well under Windows 2000. Is there a way to make it work in XP SP3?
When I try to open this accounting program, the command window opens and a text flashes on the screen, then it goes to a blinking cursor. This program works very well under Windows 2000. Is there a way to make it work in XP SP3?
Unlike earlier versions of Windows, Windows XP does not rest on the BACK, and as a result, Windows XP does not have a program to do many things that would allow BACK.
On the other hand, is Windows 2000, such as Windows XP, based on Microsoft's NT operating system, and in general, a program that runs on Windows 2000 must run under XP. You can compare, for example,
Troubleshooting in Windows XP MS-DOS-based programswith
Troubleshooting MS-DOS-Based in Windows programs (that applies to Windows 2000)
and you will see that the documents are virtually identical.
If the suggestions of "Troubleshooting" in the article XP don't help not (in fact, before judge you), see if you can get your old application work using the Compatibility Mode of Windows XP program. If the configuration in Windows 2000 does not work, try Windows 95.
-
I have a running program... BUT I'm not! Help...
We have a program that is running and I see on the 'task manager' or the sign down! And when I try to click on the program to open it, it just says: 'the program's already runnin I'll always have to restart the entire computer again just to pull up! Can someone help me?
Thanks in advance!
Tini
Do you mean that you can't find the application in the 'Applications' in the Task Manager tab or that you don't find it in the tab "processes"?
The process name that appears under the processes tab will be not exactly the name you would expect - and sometimes it's a bit obscure.
What is the name of the program?
What happens if you restart the computer - which should stop, unless it is configured to run at startup of Windows. You can prevent this behavior if you want.
The best way to stop an application from starting when Windows starts is to find the appropriate option or setting in the menu of the application of "Préférences" or "Options".
Otherwise, download Autoruns, let it scan, see the 'Connection' tab, find the application and uncheck the box at the left end of the line.
-
Original title: broken shortcut
ALL my shortcuts on the desktop and start menu - all programs are showing up with blank windows pages icon and the name of the file and .lnk I uninstalled something and it happened that I tried system recovery and everything else that I uninstalled the States are back but this how can I solve this?
Hello
1. what changes have been made to your computer before the problem?
Follow these steps and check if they help.
Step 1:
I would say you rebuild the icon cache and check if the problem persists.
a. press the keyboard Windows logo key combination + R to bring up the Run dialog box.
b. type cmd and press ENTER to open the command prompt window.
c. in the command prompt window, type the following commands pressing ENTER after each line:
Taskkill /f /im explorer.exe
attrib-h "%userprofile%\Local Settings\Application Data\IconCache.db.
del "%userprofile%\Local Settings\Application Data\IconCache.db.
Explorer.exed. this restart Windows Explorer and rebuild the cache icons as needed.
Step 2:
Test the issue in a new user account.
-
Flash the taskbar interrupts other running programs
HP having problems with the flashing task bar which interrupts the other running programs, is it a problem of update or a manufacturing problem?
Original title: performance of tasks/HP bar issues.
Hello
I suggest you to check if the taskbar is set to auto-hide.
Here is the link:
Show or hide the taskbar
http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-the-taskbar
-
I recently installed a new antivirus protection software, now at any time, I try to run a program he's asking me what program I want to use to run it, even for already installed programs. For IE, firefox, etc, it's simple, but when I try to adjust the volume of the system through Control Panel he asks me what program I want to use it to run only and I can not. Any ideas how to solve this problem?
Look at the article on execution of .exe files.
Article number: 950505 - when you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505You can make the default program using set Associations.
1. open default programs by clicking the Start button, click default programs.
2. click on associate a type of file or Protocol with a program.
3. click on the file type or protocol that you want the program to act as the default value. (In this case it will be for .exe files).
4. click on the change agenda.
5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs.
6. (if you don't see other programs or your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)
7. click on OK.You can also look at the information here: restore the .exe Windows Vista file association, after badly with another application
http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.htmlThank you
Marilyn
-
I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.
Any ideas?
What is the version number of Studio 5000 you have?
You can try to install using the "compatibility mode".
What is program compatibility?
Program compatibility is a mode in Windows that allows you to run programs written
for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
but some older programs might run poorly or not at all.
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibilityCompatibility mode - make sure to run older programs in this version of Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
Windows 7 Compatibility Center
See if your software or hardware is listed and what options you havehttp://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Learn how to use the Mode of Windows 7 compatibility with legacy applications
http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps
Using Windows 7 or Vista Compatibility Mode
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html
J W Stuart: http://www.pagestart.com
Maybe you are looking for
-
display Web pages with characters rather than text
I have a user who is having a recurring problem with the display of specific Web sites. I have on occasions uninstalled and restored only to have it come back in a few days.
-
Satellite C660D - 19 X - touch pad or external mouse not working not
Good evening Touchpad of my neighbour does not work.She tried an external mouse and I tried a different external mouse.No luck with either Any ideas?We tried it in safe mode too and no luck.We tried the system restore, but no luck. Thanks in advance.
-
My laptop HP Compaq nx7400 has its keys Ctrl and Fn exchanged. How can I set it right?
-
High definition (HD) of Intel Graphics Driver
Hello Recently replaced my laptop Windows 7 x 64 windows 7 Professional × 32 and I have not found High definition (HD) of Intel Graphics Driver Version: 8.15.10.2476 for my windows 7 pro 32 Please I really want to run my HP Pavilion g6-1325sx Noteboo
-
How can I get an old Dos program open in its entirety using a pif file that I used to XP