the computer is configured to automatically run programs at startup detected

Similar Questions

• The computer is configured to automatically run progams at starup

  Windows 7 Home Premium 64 bit IE 10

  Windows 7 Home Premium 64 bit IE 10

  OK - what is your question?
  Are you eager to stop some of them from loading at Windows startup?

  -Go to the start menu and type msconfig in the search bar or Run command
  -In the Configuration of the system, click on the Startup tab, and clear the check box next to any
  program, you want to load with Windows.

  .

• The computer is stuck on automatic updating when closing down.

  During execution of the closure procedure an automatic update starts and had not finished after many hours. Even if it says do not turn off or unplug, because the computer will turn off automatically, I had to do. Now when starting, it still considers that it is updated, and other programs do not work correctly. I need to start in safe mode to restore, because the system restore does not start. How that I start in safe mode? And why the automatic update is causing this problem? It's never happened before, so there must be a bug in the update, and I can't stop it starts up because it is automatic! Someone Please helpme!
  My computer is using Windows XP Professional
  Thank you very much

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Above is the link to XP Newsgroups.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Problems with the binding update Windows XP

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon

  These are the Vista Forums. Mick Murphy - Microsoft partner

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

  I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

  Please can you help me?

  Original title: AdvrCntr6.dll

  Hello.

  There is a guide for fixing here:

  http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm

• every time that the computer shuts down, (IE Automatic updates), recent documents is empty.

  original title: recent documents: every time that the computer shuts down, (IE Automatic updates), recent documents is empty. How do I prevent this? Very frustrated Ruth

  Recent documents: every time that the computer shuts down, (IE Automatic updates or I turn off during the night) recent documents is empty. How do I prevent this? Don't know if the following has nothing to do with it, but - about 6 months ago I reinstalled XP, since then I have no sound and comes to the foregoing. Oh and to add, at the same time, I've changed hard drives up and down, which means that I have and that he had 2 hard drives.

  Very frustrated Ruth

  Hello

  Try the steps below to solve the problem.

  Caution:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  (a) open the registry editor and navigate to:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer-advanced

  (b) save the key in a file. See the article of support upward.

  (c) the value of Start_ShowRecentDocs as a result.

  (d) value of 0 - list of my documents most recently opened is disabled
  Value 2 - list my most recently open documents is enabled

  Note: set the value to 2.

• Why the computer wants me to choose a program to open the downloads with

  Why the computer wants to choose me a program to open the downloads with

  I fixed missing .exe file

• Does restart/reboot the computer after installing or uninstalling a program?

  Original title: does restart/reboot the computer after installing or uninstalling a program? Which option is it on Vista? Hit reboot? Or off, wait and then start up?

  I was told that if you add or remove a prgram, after it installs you need to 'reboot '.

  Is this true?

  Does this mean that, after the program is installed, you must reach the restart button? Or press 'stop' and then again wait a minute and then be able to save the PC?

  Hello

  Often an installation or uninstallation of will need to reboot to complete and it never hurts except for the
  time it takes.

  A reboot is usually sufficient.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all).

  Hello!

  I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all). I picked up my installation disc and everything, only to find out that someone stole completely he reapply. I am unsure weather or not it is enabled or whatever it is. I tried to call Microsoft technical support and they said to go to the retailer I bought since then, but the retailer in question no longer exists. I'm just screwed?

  Thanks for your help!

  You can retrieve the product key, and then use it to re-download a new copy:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

  Go to the recovery of the software Page and then enter your key:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  If you plan to upgrade to Windows 7, see:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Ads are played in the computer even if there is no program running

  Original title: my problem came out of nowhere, I keep getting interrupted with audio ads or programs.

  Even if I close all the windows, I can still hear announcements!

  Is it possible that the widows can be opened that I do not know of?

  its very frustrating for almost a week now... all the world this experience?

  Thanks for any help

  Hello
  1. which version of the operating system are you using?
  2 did you do changes on the computer before the show?
  3. what browser do you use?

  Perform a virus scan by using the Microsoft safety scanner.
  Microsoft safety scanner
  http://www.microsoft.com/security/scanner/en-us/default.aspx.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I recently C clean the computer and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?

  I recently C clean the computer (Vista) and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?

  Thank you

  Hello

  (1) are you facing problems with your computer?
  (2) when exactly the error message is invited?
  I recommend you perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  You can also run the Microsoft Safety Scanner to make sure that your computer is virus-free.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  I hope this helps!

• Try to get the Scheduler of tasks for automatically running Windows Media Player with a log?

  I did a new task in the Task Scheduler to run wmplayer.exe. The trigger is whenever a user logs on. He gave me a permission error, which I fixed it by checking "do not store the password." Everything remains that I went alone, without anything change it. So, I disconnected and reconnected again to see if wmp would open by itself at startup. There can be no. Any ideas?

  Haha, nevermind, I forgot to restart the computer >. > This is a lesson to all, ALWAYS RESTART you YOUR COMPUTER IF YOU HAVE PROBLEMS. Patches about all ^_^

• 120 envy: envy 120th Scan of the computer cannot be activated MAC running El Capitan

  Hi guys,.

  I recently installed it all above named mentioned HP printer software but for some reason, I can't Scan for compatible computer.

  I need to work in order to scan a batch of documents and consolidate in 1 file.

  The native application of the Mac scanner handles scan page by page and saves it on my desk. but I really need the batch option to work.

  I followed all the standard procedures to reinstall the software, resets etc, but I'm still having the problem.

  Under the HP utility screen, I have the scan to computer option on the bottom of the menu. I click on that and extract information. Then I get this message as well as the red dot

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I made sure all the software is installed and I still have the same question.

  I can connect to the printer and scan of the web also. I just seems to be a problem with the HP utility App and the printer.

  Any advice would be appreciated.

  Thank you very much.

  Paul.

  Hi Paul,.

  Download and install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Then, open the HP utility and try to activate the Scan of the computer again.

  Please let me know the results,

  Shlomi

• Just after the closing of the games installed on my computer, my firefox browser automatically runs and takes me to this company website; How can I disable this

  These games are downloads from various sites (myfreegames.com; gametop.com; freeridegames.com; others) and the action is always the same - as soon as I leave or made a game, Firefox opens immediately and connects me with this particular game company Web site. There must be a way to disable it. Help, please.

  I'm not there. These sites are on the edge of being illegitimate often, and they can open a browser window to try to sell you a game, or display advertisements (or both). It opens just Firefox because it is your default browser.

• Computer crashes opening files or run programs of desktop

  I have SP3 installed with XP Home. If I click on a link, file or program on the desktop everyting freezes after a clean boot. The weird part is that if I run the taskbar Control Panel application, close it, now, everything will work as it should. In safe mode, everything works as it should.

  mfguitar,
  Here are a few things first.

  Demarrer start in SafeMode with command prompt, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Ensure that all updates are up-to-date and also update the drivers for your hardware.

  Create a new user profile and check the status on a new profile.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.