My screen moves everywhere

Similar Questions

• Control screen moves to the right?

  My screen moves to the right about 1/2 "after that I have reset to factory settings?  I can fix with the factory settings, but after about an hour she moves to the right again?

  DEERJOHN

  Hello deerjohn,

  I understand that you are having problems when your monitor guard shift to the right, and you have tried to do a factory reset on it and it continues to happen. There is not a lot of troubleshooting you can do with a monitor. I provided you with the steps to do a hard reset on the screen below:

  Step 1. Unplug the power cord from the wall and the monitor

  Step 2. Hold down the power button while the power cord is disconnected for 30 seconds (this drain ALL the power to the monitor)

  Step 3. The monitor, ensuring that it is plugged directly into a wall and not into a power strip or surge protector.

  If the problem persists, try to reduce your screen resolution down a little and see if it works.

  To go further with troubleshooting that I encourage you to post the number for your product for your computer (if it's an HP computer). I'm a link a HP Support document below that will show you how to find the number for your product. So, if you could indicate what operating system you are using. And if your operating system 32-bit or 64-bit like this and the product number I can give you accurate information.
  
  How can I find my model number or product number?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?
  
  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• screen moves to the left on hdtv screen when loading games

  With some games, when they load the screen moves to the left, causing the left side of the screen appears on th right as well as a black boarder. im running windows 7 on an emachine 2.0 GB with an AMD sepron (tm) 145 Proccesor 2.80 GHz with Geforce NVIDIA nforce 430 vidieo - and im using a flat screen of 37 "viso HDTV as a monitor

  Hello

  In windows 7, the resolution of the screen during playback of some of these changes of games based on the resolution of the screen, you have provided for the game.

  Method 1:

  Do a right click and go to the shortcut properties and find the box where it says 'run' pass the value normal in full screen.

  If this does not help, configure the following setting and check:

  (a) right click on the game shortcut icon, click Properties.

  (b) on the shortcut tab, go to run.

  (c) in the drop-down list, select expand.

  (d) click on apply to apply the setting.

  (e) click on Ok to confirm the change.

  Method 2:

  Also, I suggest you try changing the hardware acceleration, here are the steps to change the hardware acceleration.

  (a) go to start > Control Panel

  (b) in the window of the Control Panel, click appearance and personalization

  (c) click personalization > display settings, and then click Advanced settings.

  (d) go to the Troubleshooting tab, and then click on change settings.

  Note:

  The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  You can also see this thread and find the solution posted by fix ' that1.guy on Saturday, January 2, 2010 02:06 "user of the problem.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/2ff8212d-8656-4ced-9da1-21deed2c6c2a 

  I hope this helps!

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drag the entire screen moves

  Hello!  I'm working on my first project in edge animate and have encountered a problem that I hope someone can help me with.

  The 'slide show' is supposed to be read on an ipad or tablet.  It is implemented to scroll through screens by clicking on a thumbnail or slide to the left or to the right.  When I test this and swipe left or right, the entire screen moves.  Is it possible to lock the header, footer and thumbnail bar in place so that they remain "anchored" and bounce around?

  Here is a link to illustrate my problem: http://envisionideas.com/YOURChecking/YOURChecking.html.  This will be optimized on an iPad.

  Thanks - I really appreciate any suggestions!

  Last one at random... This is a feature of Windows by chance (ie. in Internet Explorer while your application is running)?

  If so, add this little gem to your css:

  HTML, body {}

  -ms-touch-action: none;

  }

  Edit: nm, your original post said iPad.

  Try to put this in yourin your html code

  for example.

• Screen moves when I point the mouse, like opening an email

  Relatively new desktop IMac, Yosemite.  I use a mouse when I point the cursor on any line, the line moves suddenly.  It sometimes takes a few tries to succeed, because it moves (move a line or so away).  He did this, since I got it and seems to be deteriorating, or I'm more tired of it.  Any ideas?  Thank you.

  Looks like you have perhaps inadvertently zoomed in the screen. Try typing the command-option-8 to toggle the zoom.

  You can find the zoom settings in the preferences system-> accessibility

• Now, the screen moves as the surface is larger than the actual size of the screen. I checked its display options, but how do I disable this screen oversized?

  Hello

  My mother was a member of the family to try to help inrease size but Bobo and now its screen in any program or simply from bottom of screen size is larger than the size of the screen.  She can move the mouse to the left to bring the extreme left veiw and then the same thing right but never have all the screen in veiw now.  How to restore to normal for her.  I tried control - display, but not... help her please help me

  Hi M Carmel,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with the resolution of the screen display.

  I suggest you to see the links and check.

  Change the resolution of your monitor

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Exit full screen movie on Android device

  Hello

  We are developing a presentation with a lot of movies for Android (Motorola Xoom) device. Movies should play in full screen mode. That s not a problem, but if the film is playing, there is no exit button.

  We don't´t I have a problem using the same folio in an iPad. The iPad displays an exit for the mode button fullscreen.
  This is a behavior of the specific system (<>- movie player Android/Xoom iPad movie). Or is there any settings that requires a full screen exit button on an Android device?

  There is a "back" button in the bottom left of the Xoom Android user interface.  It's the fastest way, that we have to return to the article.  Otherwise, you will need to scan to the end of the video timeline to force it to return.

  Andrew

• I changed my point of view screen to "maximize" and then changed back to normal and "applied" this change. The view on my screen moves back between the two.

  I went on 'Properties' and then changed the screen to "maximize" that was impossible to navigate.
  I then reset the command on the screen 'Normal' then 'Apply' and 'OK '. Now when I open Firefox it
  by default, the maximum size of the screen. No matter how many times I try to re - configure
  the size of display screen, the default browser to the Maximum size. Nothing works!

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• LCD screen moves on my laptop satellite

  Hello!

  LCD screen of my laptop is moving! It looks like its not glued to the screen!
  His works always fine, but it's a little boring.
  I just discovered it a few days ago and worried. Is there something I can do?

  Thank you!

  Hello

  This issue is not known to me, but it certainly isn't usual display behavior. You can try to check on an external screen to see if there is the same situation. If the external monitor everything works fine, I imagine that the LCD monitor may be defective.

  Make sure you also all the display settings are right (resolution and color quality).

• When I run Halo Combat Evolved, the screen moves to the Center?

  Whenever I try to start my game, the menu screen continues from the central position. It wobbles almost everytime I try to play the game. I tried trying to access settings on Halo, but it still does not work. Then I tried to adjust the settings on my computer, but it didn't always work, what should I do?

  Try to set the resolution of the game to even that your monitor is fixed.

  If it is not an option, set your monitor to something that is compatible with one of the game settings.

  MCP. MCDST. LVL 80

• Movie Maker - corrupted with green flashing screen movie file

  After importing successfully via Firewire MiniDV camcorder movie in avi 'clean' format (tested by looking at a media player).

  I have started working on the edition in MovieMaker, the avi file appears corrupt with annoying intermittent green flashes. This is obvious when you export to another storage medium. Its OK.

  Help, please

  I discovered that the green flashes was on the video that I had downloaded, I noticed the when using other video editing software...  They were on the original video or was caused by the program I used to download...  When I made the film the film on video setting for your computer, seem to make the green flashes more sensitive... Using the avi setting creates a huge file and seems to squish them out of existence...  So my apologies to Microsoft...  The only time where this Director has caused a green flash was after editing a video for a long period of time and I share a video with a green flash appears in the Division...  That would signal that my memory has been exhausted, and I would like to do a disk cleanup and restart my computer, and I could continue to edit the video...    Filmmaker working fine all along so the problem of the mysterious flashing green have been resolved...

• Screen moves laterally in the mobile.

  My site is www.centralbanktrust.com.  I am currently developing the mobile version and am having trouble with the screen moving in all directions that I try to scroll.  I have tested on several different phones.  When I go to muse.adobe.com it scrolls perfectly and the screen is locked in place.  Is there a code that I put in to make it work correctly?  What do you recommend?

  I have fixed my only by going to the 'EDIT' menu and selecting 'SELECT ALL', I found a tag on the page hiding wihin the Breakepoint I have a problem. I hope this help you guys! Cheers, Rodrigo.

  Site Web of Adobe Muse tips - vertical scrolling of Bugs fixing

• What should I do? Everytime I type something my cursor has developed a mind of your own. It moves everywhere where he wants.

  This happens when I type in the Gmail e-mail and Microsoft office products. It drives me crazy. I am constantly making corrections. Sometimes, another page appears automatically. For example - I was typing just that, and all of a sudden I went back to Windows Phone! I tried remove gmail or recharge it without result. The help is desperately needed. It is a very common phenomenon. And I'm helpless about what to do. Thank you, Jane

  Hi again - it seems that this other person had the same problem as I do after reading it. I ran Avira antivirus, Anti-Malware and now scan Microsoft security separately and nothing was found. I know that I am without touching the keyboard. I would be willing to turn it off - where can I find the instructions or the area on the computer to do. If not - you have other ideas? Thank you, Jane

  Hello

  See if that helps

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-performance/what-do-i-need-to-do-everytime-i-type-something-my/8f780ad6-264C-4440-8e46-6bd50ddec78d

  How Deal with a cursor jumping on a HP Pavilion computer dv2715nr laptop running Vista

  Read more: How to Deal with computer cursor jumping on a HP Pavilion dv2715nr laptop running Vista | eHow.com http://www.ehow.com/how_2319640_deal-jumping-cursor-hp-pavilion.html#ixzz1zshw3D8W

  Edit: HP PCs - troubleshooting of the mouse (Windows 7, Vista, XP)

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3432827&prodTypeId=12454&ObjectID=c00006616

• my screen move? could you please tell me a simple way to solve this problem? __

  Remember - this is a public forum so never publish information such as email or phone numbe

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I answered the question of the anotehr with a solution that can help you. Please read my solution here:http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/d60243f4-6e14-4bd6-aed4-743b5cb790d2/#a6cdc490-7b78-48a8-961d-73d73ee0c870.