LCD screen moves on my laptop satellite
Hello!
LCD screen of my laptop is moving! It looks like its not glued to the screen!
His works always fine, but it's a little boring.
I just discovered it a few days ago and worried. Is there something I can do?
Thank you!
Hello
This issue is not known to me, but it certainly isn't usual display behavior. You can try to check on an external screen to see if there is the same situation. If the external monitor everything works fine, I imagine that the LCD monitor may be defective.
Make sure you also all the display settings are right (resolution and color quality).
Tags: Toshiba
Similar Questions
-
LCD screen turns off without reason - Satellite M40X
I have a problem with my laptop Satellite M40X, I work when the LCD turn off and I hear two PIF. To turn on the LCD screen I need to restart the laptop, but the problem persists after a few minutes.
Can someone help me, please.
Hello
Here you can compare the version of the BIOS installed on the laptop with the one published on the page of the Toshiba driver.
If you use the older BIOS, you can try to update. Maybe the update will sort this strange behavior.But there could also be a hardware malfunction if the BIOS update does not help.
-
Vertical lines on the LCD screen of the Qosmio G20
Hi all
My Toshiba laptop shows a few vertical lines on the right side of the screen and the number of lines that appear are increasing day after day
I have connected to an externel disply and Born no problem with that so I'm quiet sure that this is the problem with the lcd screen.My laptop is not so much in a guarantee period is this screnn is reapairable or not
Please help me.
Please see the attached images
[http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink | http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink]
regarding
AERTSWhy did you create a second thread on the same topic:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=139420It s easier than a single thread and, therefore, you must follow your first topic!
-
Hello.
I have toshiba laptop M30X satellite and I difficutlties about the link between the laptop and lcd tv 32 S 3000.
1. first of all, I tried with the s-Video cable: I see what is on the screen of the computer laptop on the TV screen, but much worse than plugging in the VGA cable, in terms of sharpness and resolution. I did this by setting the LCD display in the menu windows.
2. when I use the VGA cable, I don't see it on the TV screen, what is on the screen of the laptop.
I might need to upgrade the drivers for the ATI radeon 9600/9700 series factory installed on the laptop?BUT the biggest problem arises when I want to see on lcd display media player file formats: mpeg, avi, etc.
What's happening: on the screen of the laptop, I have the image of the film, and on the LCD TV screen I have BLACK SCREEN (even the media player toolbars are still visible)
If anyone has an ideea, I appreciate it.Thank you for your time.
> 2. When I use the VGA cable, I don't see it on the TV screen, what is on the screen of the laptop.
> I might need to upgrade the drivers for the ATI radeon 9600/9700 series factory installed on the laptop?
This has nothing to do with the display driver, but with the connection.
The VGA port should be used to connect the external TFT and not the TV monitor
But have you used the option of FN + F5 to switch between screens devices?> On the screen of the laptop, I have the image of the film, and on the LCD TV screen I have BLACK SCREEN (even the media player toolbars are still visible)
To my knowledge, you must first switch the display on the external monitor and then you should start the film actor. -
Satellite PRO U500 - LCD screen size is reduced
Hi all,
I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
Is there a solution to my problem? I have to send in the audience?Thank you for the help
GiuseppeH
It is really strange, especially if you see the same thing in the BIOS settings?
Since when did you notice this behavior?
Do you use pre-installed OS original you got with your laptop?Have you done something that may be responsible for the issue described?
I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.
-
LCD screen broke on my Satellite C845
Hello, my name is Ericka fron El El Salvador.
I recently had an accident with my laptop (Satellite C845-SP4330KL) and the LCD on the screen broke, now, I can see only half of the image on the screen.My questions are:
Is there anything I can do for the screeen without have to raplace it?
If the only solution is to raplace the screen, I find the screen to this site?
How much would it cost to replace the screen?I hope someone can help me with this. I bought my laptop just 2 years ago.
> Is there anything I can do to the screen without having to replace it?
If the screen is broken, it must be replaced. There is nothing else, you can do about it.
> If the only solution is to replace the screen, I find the screen to this site?
Unfortunately not. You have two options. You can contact the Toshiba authorized service provider in your country and ask for help. They can order the new part and replace it for you. Second option is to ask some independent service or a technician for replacement. Mind a bit of luck you can use Google and check if the display can be ordered online in an online store in your country.You know that's not easy to help with those things. In some countries, it is quite easy to order this part, but in some countries, it may be quite problematic.
-
Satellite A100 - display balack after replacing the LCD screen
Hello
So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.
When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question
I think it is the inverter, any suggestions?
Could be the sensor cover?
Thank you! Kyle
Hi Kyle,.
Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.
Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark. -
LCD screen flashes on Satellite 2450
my laptop model is satellite 2450...
recently, my lcd screen is now flashing...
yesterday it worse... Keep flashing up and down very seriously...
around a few minutes later... the screen is done... but without the backlight everything barely be seen now because of the conditions without backlight...Wat kind of problem, it's...?
all I can do about it?If I send to repair... how much will it cost? or rather I just buy an external lcd to plug?
Hello
Of course there is a hardware malfunction. The best way to know what may be the problem is to contact the Service of your country partner. In my opinion, it may be some problem with FL inverter and it must be changed.
As I said contact Service partner. You can find one under section http://eu.computers.toshiba-europe.com support & downloads.
-
Need LCD screen for Satellite A10 S811
My screen laptop for some reason any (must have hit somewhere) does not work properly.
So I have to replace because I need my laptop for my work and I have a lot of files that I need.My laptop is 4-5 years so I don't want to pay a whole fortune to replace my LCD screen
This is the A of Toshiba Satellite series with screen 15 inches.For the month next (until 27 August), I'd be in Paris because of some jobs and I need repair my laptop so that I can work.
If anyone knows anything, where I can get a screen at a reasonable price, please respond as soon as possible.
I found this site selling LCD screens http://pchub.com/uph/category/115/15-TFT-LCD.html but im not sure which one to buy for my model is.Please, any help is needed... It s quite urgent.
Thank you very much.
yours,
Andreas chouliarasHi Andreas
As you probably know the LCD and mobile motherboards is one of the most expensive parts. The new parts cost a small fortune
I studied a bit on the net and found this site with 15 compatible screens for a Sat A10.The new view costs about $ 325... so it s really not a cheap part!
http://www.screentekinc.com/Toshiba_Satellite_A10--15-inch--1024x768-XGA-laptop-LCD-screen.shtml
What do you think about part of second hand?
-
Re: Satellite M300 - should I replace a damaged LCD screen?
My LCD screen is damaged and almost impossible to use. The laptop is still under warranty, but I understand screen damage are not covered. I don't know even how it happened. I'm not aware of any bump or impact to the unit.
It is better to spend the money to replace the screen or it would be cheaper to buy a new computer? It is a spare computer that is only used if I am away from giant, holidays, at hospital etc.
That the cost would be about, in Australian dollars?
Thank you
warrawillahHi warrawillah,
I think that it of difficult to tell if you need to replace the screen or buy a new computer. In my opinion it s based on the price of the new view.
You need to contact a service provider authorized in your country. Guys can order all spare parts and if you want to replace it also.
Good luck!!!
-
Satellite 5100 - LCD screen no longer lights
Hi, I hope someone will help me on this problem.
After disassembly of the top satellite covers the lcd screen that does more, but I guess the system is working properly because I can hear windows access "jingle". I think that I reconnected it all cables (green and white connectors for the video card), but I'm not sure thin brown/white/black cable of the lcd screen. That's all
Hi stefano88,
Why you have disassembled the LCD?
To be honest I n don't know cables, you want to say you also plugged the UPS FL for LCD display? This is necessary because FL inverter controls the backlight of your screen.
Can post you a photo of the cables you want to say?
-
Satellite Pro U300 - the broken LCD screen
Hi all
My first post please bare with me.
I have a Satellite Pro U300, who has a broken LCD screen.
I have a replacement screen, but not sure how to go abouts it change places.Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?
Any help would be greatly appreciated.
The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;) -
New LCD screen of need for Satellite L20-173
Can anyone help I need to get a screen for my laptop everything else works fine, I can have someone
solve this problem for me when I found one and what is the cost?The specs for the laptop are model L20-173.
Hello
If you want to buy a new screen, you can order this part from the provider of service authorized in your country.
But are you sure you want to buy a new piece? The LCD is one of the expensive parts for laptop and it will cost you a small fortuneInstead of buying a new game, you can try to search the second hand LCD!
A new 15 1024 x 768 LCD display cost about $ 300
http://www.screentekinc.com/Toshiba_Satellite_L20--15-inch--1024x768-XGA-laptop-LCD-screen.shtml -
Satellite Pro L10: I am looking for a new LCD screen
Hello
I am looking to buy lcd screen for my machine L10 had been broken in me. I don mind to buy second hand. is it possible to help me.Will be very grateful to you
There is not much help. Either you contact Toshiba service or you can check if you can order LCD of some independent hardware for laptop store.
I put t know in which country you live but Google a little and see if you can find a PC shop where you can order parts for your model of laptop.
BTW: do Exchange you view-only?
-
Satellite P30-110: this screen corresponds to my laptop?
Hello
I need a new LCD and I found one on ebay. Can you please tell me if it is good? I want to make sure, before I buy it. Can you please tell me if the specs of this screen correspond to my laptop?
Thank you
Kind regards
Links
9QQrdZ1QQssPageNameZWD1VQQcmdZViewItem http://CGI.eBay.com/New-17-WXGA-Glossy-LCD-Screen-for-Toshiba-P30-S6362_W0QQitemZ150063671890QQihZ005QQcategoryZ4218
Hello
I think that this screen will correspond with your laptop.
The design of models P30 must be identical.Good bye
Maybe you are looking for
-
Hello I run FireFox (FF) for years and love. I'm running FF 3.6.18 am thought and upgrade to FF4. However, a friend upgraded to FF4 and I notice that the tabs for different pages are very high on the screen, away from the pages concerned, instead of
-
6.4.1 installed from 6.2.5 yesterday. Everything went well. Did all the "computation". has worked well. No not from one day to the next with 354 out_of_memory error. now, does not start. I tried reinstallOS. No luck. totally stuck and he needs for bu
-
HP Elitebook 8540p: device drivers Base system shortfall of 10
Hello I win 10 64-bit running on the HP8540p. The Device Manager shows 2 devices with missing drivers base system: PCI VEN_1180 & DEV_0843 & SUBSYS_1521103C & REV_14\4 & 3b8bcf53 & 0 & 32F0 PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C & REV_14\4 & 3b8bc
-
I am trying to install the 2007 Office Suite on a computer windows vista laptop. In the middle of the installation the following code appears: The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then
-
Office Jet 8710: Change password on HP connected account
I removed my Office Jet Pro 8500 to a new Office Jet 8710. The installation process has been more painful. In the end, I tried to turn on the printer and I was told that I have an acount connected HP. I can have the account but I don't remember the