My SD card on my Gateway laptop does not work when I insert an SD card in my camera.

I recently installed Windows Vista. What's wrong? How can I get it to the file of /store/ for AutoPlay as with my PC which has a SD slot?

Hey Baja,

So let me know if this describes your problem correctly. You installed Vista on your computer laptop gateway is not a SD slot, but have a SD slot on another PC card "How can I get to... play... as... my PC that has a SD slot.

Ok. If we cannot create a SD slot through any configuration changes in Vista that I see very well, and this seems much more like a matter of material for your portable Gateway for me. Here's what I would say if this framed properly...

The only other way I can see to read your question, is that you have a SD card on laptop drive gateway that doesn't work properly, which would again a hardware problem. In the case the following solution should solve your problem:

What you need is a USB adapter that you can plug the SD card into this, your computer can read. Something like that-

http://www.Walmart.com/IP/IOGEAR-12-in-1-USB-pocket-card-reader-and-writer/10299066?wmlspartner=GPA&SourceID=44444444440410664208

This is just an example, as you can see they are very cheap - in this case on a $13, so this should be a good solution.

Hope this helps,

Steve <> Microsoft Partner

Tags: Windows

Similar Questions

  • AutoPlay feature does not work when you insert a CD-ROM into the CD drive

    Original title: computer disc drive

    Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

    Hey Big-Mack,

    Try the steps of troubleshooting mentioned in the following article and check the result.
    See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

    If the problem persists, run the Autoplay Repair Wizard and check the result.
    See Autoplay Repair Wizard

    Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
    For more information, see play in

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My AutoPlay does not work when I insert my card from camera to upload photo.

    AutoPlay does not as well for my hard drive. I use Windows Vista and have successfully set autoplay under the hardware and audio.

    The following links may be worth a visit:

    Windows Vista - Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista - AutoPlay: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

    Windows Vista - How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  • Pavilion: laptop does not work well

    Since last year... my laptop does not work. Every day, new questions arise. I'm quite sad. The questions are the following:

    1. junk closing the system while working.

    2 Bluetooth does not work.

    3. system becomes too heated after 10 min.

    4. good quality becomes degraded.

    5 battery backup reduced day by day.

    Please help me...

    Hello, sorry to hear about your problem.

    This is the most likely cause of your problems: "3 system becomes too heated after 10 min."

    See the following article:

    http://support.HP.com/RS-en/document/c01657439

    See you soon

  • the webcam built into my Medion Akoya laptop does not work with Skype

    the webcam built into my Medion Akoya laptop does not work with Skype... Thanks in advance

    Do Skype supported say when contact you?

  • Laptop does not work after you remove the virus win32/winfixer

    Original title: win32/winfixer

    I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

    Hello

    1. what exactly happens when you start on the desktop?

    2. you get any error message?

    3. is your laptop work fine in safe mode?

    4. What are you trying to download?

    5. How are you trying to download?

    6. What is the full error message do you get?

    7. don't you make changes to the computer until the problem occurred?

    I suggest you to see link below and check if it helps.

    Method 1: How to fix a computer that does not start.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

    More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

    Hope this information is useful.

  • My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

    My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

    I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?

    Hi Hn_668,

    See the articles below and check if it helps.

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

    In Windows network connection issues

    http://support.Microsoft.com/kb/313242

    To set up automatic wireless network configuration

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

    5 steps: how to set up your network wireless home

    http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  • Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

    I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

    LIFT, DRAG, THRUST and GRAVITY










    If I run it on a machine with Win 7 there is no problem.

    Richard Grosser

    Hi Richard c. Grosser,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

    http://social.expression.Microsoft.com/forums/en-us/categories

  • My touchpad on my laptop does not work

    original title: my touchpad on my laptop does not work it works when I move the cursor but wen I touch to go to the article that I want to go about it does nothing

    My touchpad is not working properly it works when I move the cursor but when I touch to go on anything whatsoever that it does not work iv tried doin key fn and the keys f7/f8 but nothing works can all ty assistance

    Hello

    Check this setting: Settings tab on the device, tap the settings button control panel/mouse/device. Go to the tapping section, make sure that "enable tapping" is checked. Apply/ok your way back.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • My laptop does not work on battery even though the indicator said there are 90% of the available power

    original title: laptop BATTERY

    My laptop does not work on battery even though the indicator said there is a 90% power disponiblesLorsque it is plugged in and charging. The battery would be dead even if she says she can still exist?

    Hello

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Try this - to make a Restore Point

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
    RESTART which will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

  • I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at * address email is removed from the privacy *.

    Thank you very much. I hope hear from you soon. Thank you once again :)

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at e-mail removed for privacy

    Thank you very much. I hope hear from you soon. Thank you once again :)

    You have a laptop. So try the right button on your touchpad. It work?
    If so, the only remaining possibilities are:
    1. bad mouse. Get a new one.
    2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

    P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • problem with scroll - the touchpad on my laptop does not work as it should.

    When I open anthing the page down to the bottom and I can't scroll to the top. I have to press the up button the page upward and sometimes that doesn't work. What ca I do t get it working again? The touchpad on my laptop does not work as it should. I should be able to press on and get my finger upwards or downwards and have the page up or dwn and this isn't. Please can you help me with this?

    In Winupdate settings provide "recommended updates" is disabled. (Allow the important updates)

    Go to your laptop manufacturers site, reinstall the touchpad drivers and graphics drivers

  • my microphone on my laptop does not work!

    Hi im trying to figure out why my microphone that is built into the laptop does not work, I think I could of turned off but I don't know how to turn someone can help me?

    Hello

     

    If you have turned off the microphone on the system, follow the steps mentioned below to activate it.

    a. right click on the sound icon that present in the Notification area (at the bottom right of the screen).

    b. click on recording devices and make sure that the Microphone is listed under recording devices.

    c. If it is listed, then right-click on it and click active.

    d. click on it and click set as default.

    Let us know your progress.

    I suggest you to check the article mentioned below for more information.

    Connect one microphone, music player or other audio device to your computer

    http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

    (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

    (2) I tried to change the power adapter too.

    The problem is that it is.

    Your advice is very much appreciated.

    Thank you best regards &,.

    Zia

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    It seems that you are not able to turn on the laptop and tried to solve the problem

    Please perform steps listed to find out if it is a hardware or software problem below:

    1. remove all cables and devices, disconnect them and try to turn on the device

    2. check the LED light situation and ensure the action of the spring button / stop is normal

    3 Exchange with a well known power cord and the AC adapter

    4 Pack no adapters are available, check if the power adaptor is slightly warm

    Note: This will give us an indication that the power adapter could be good

    5. do you know if the laptop was in battery or power adapter when you used the last time

    Note: Make sure that there is no spill of liquid or cutting

    6. check if the Port of the AC adaptor is loose/broken

    Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

    Hope this helps for other queries to answer the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • My nvidia graphics card does not work when I install microsoft visual stedio

    as say the title my nvidia graphics card does not work when I install microsoft visual studio 2013
    How can I stop this from happening

    We know what to do?

    Yes and Yes, but it's good for now
    I restore the Windows STILL and installation of visual studio without emulator windows 8.1 phone

    and it worked

    Thanks for the reply.

Maybe you are looking for