My toolbar and palette layers float behind my free files how do them on top?
I am a user of Photoshop CS for about 13 years... I recently downloaded CS5 to try it before you buy it. I've been a user of CS3 for 3 or 4 years now. I love Photoshop but other than Photoshop I'm not a very savvy computer user. So please bear with me as I try to explain my problem.
When I open PSCS5 he fills the screen of my computer completely and it looks like this: a thin strip of Inc. 1/2 on the left that holds my 'tools', a 2 inch wide strip on the right that holds "Layers, channels, paths" and a 1 1/2 inch Strip on top, then a big area in the middle.
I used 2-12 X 12 300 dpi new files open AND 10-15 photos or elements scrapbook and documents open for work at a time.
In earlier versions of CS toolbar and palettes layer strips were ALWAYS at the top, so I could access any quantity has been opened on the screen. In CS5, I keep burying them and have to dig them to use. When I use 'Float in window', I need, using the tabs does not allow me to see what I need to see to work on documents, how can I get the tools and layers on TOP only?
THANKS for listening... I hope you can help!
Theresa
You should probably remove the panels on the right and the box tool by clicking and dragging on the upper part in the workspace.
Then your choice alongside the workspace without mooring to them (ways to the blue line, they are going to dock)
Tags: Photoshop
Similar Questions
-
When I open Photoshop CS2, the toolbar and Palettes are quite small and difficult to read. Can I fix this and if so, how?
You can also change the font size of the user interface in photoshop cs2 under Edit > Preferences > General, but that
Quite some of the bigger text and not on the icons.
-
The volume
(speaker) icon is missing from the toolbar, and I can't adjust the volume! How can I get that back?HelloWhat changes did you do before the question?I would like you to follow these steps to solve the problem.Step 1:a. right-click in the taskbar near the time display and you'll get a context menu.
b. click Properties.
c. under the icons system to always display, check the volume.
d. click on apply.Step 2:Click on fixit from the link below.System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
http://support.Microsoft.com/kb/945011/en-usAziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Upgrade XP 2002 to more current system
Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?
Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?
Last free version of what?
If you're talking about Windows, it has never been free.
-
Create the action drag and drop layers of curve of one file to another?
Good, everyone!
I am recording a Photoshop Action that...
1 open a source file
2 selects the specific curve layers
3 door the layers of curve in a destination file.
I tried to simply drag / drop the selected layers from the source to the destination document, but the Action records only "select previous document" without actually transferring the curves.
I can right click on the layers, I want to breed and select "in double layers...". "but she blocks the Action in a specific destination AND it will not allow the menu appears.
I could look at it a different way, I save each as preset curves layer and has the Action simply create layers instead of dragging a file source. However, I have a prohibitive number of those darned layers and most of them have "Mix Ifs" on them as well, and that would take a lot of time to produce.
Any suggestions?
Thank you
Bruce
The function below copy a layer of the activeDocument (selected doc and layer) to the next open document. If only the two documents are open, it doesn't matter what order the documents are in. i.e. with only two following open documents and previous doc is the same doc.
function copyLayerToNextDoc() { var desc = new ActionDescriptor(); var ref = new ActionReference(); ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') ); desc.putReference( charIDToTypeID('null'), ref ); var ref2= new ActionReference(); ref2.putOffset( charIDToTypeID('Dcmn'), 1 ); desc.putReference( charIDToTypeID('T '), ref2 ); desc.putInteger( charIDToTypeID('Vrsn'), 5 ); executeAction( charIDToTypeID('Dplc'), desc, DialogModes.NO ); };
-
I have an iphone 5 and I do not have a free Garageband, how do I get one?
I have my iphone 5, and I do not have a free garageband what I did wrong?
To get GarageBand for free, you need a device that has been activated after September 2014, check this link:
-
So I designed a logo for a company, they want to buy too! I don't know what type of file to send to them for their personal use. I am new to illustrator, so I'm not sure whether it should be a .png, .pdf or .svg. They don't have access to Illustrator, so they would not be able to view the native .ai file, how can I send the file?
Whenever I have provide a customer with a logo, my first question that would be what they are they who need for?
And when you have the response from them, it will give you a good idea of what to provide.
Second to that I will always create a logo set to compile something like the following:
- Original .ai logo - RGB/CMYK/Black/White versions
- A set of PNG with transparent backgrounds of different sizes (something like 100px, 250px, 500px, 1000px wide)
- A set of .jpg in various sizes (something like 100px, 250px, 500px, 1000px wide)
- And now a .svg and .pdf file
Once again it all depends on what the customer wants it, but once you have furnished with everything that they are able to use it for the most part.
Good luck
-
My hard drive has failed, but I had cloned the much smaller former player. I went to the old hard drive and it starts as principal. MS asked for the codes wyhich I put in and it was authenicated, now comes the problem, I restarted the PC and he was fine, then I rebooted, it a time of sedcond to be sure it was working properly before I attenpted to clone on a new hard drive.
Then the disaster my button start Xp and IE8 toolbar is missing. To start Windows with a xp desk top icons. Can access the Task Manager via ctrl. ALT, delete and sees the C: drive with the etc program files but no users. How can I fix
Hello
This problem can occur for the following reasons:
- Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
- Your user account settings are corrupt.
- The core files are damaged.
- The Explorer.exe file does not load at startup.
Please refer to:
Note:
You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.
Reference:
(http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
Please return to the State of the question.
-
Determine the OCD and skin of pixels of the published file - how to?
Hello
I develop a few movies in Captivate that I want to play (load and unload as swf) in Flash. I know the size of the stage of Captivate, but how to determine the amount of pixels to add to the Flash file to cover the skin and the Table of contents (TOC)?
I see a framework I put it in the skin that allows me to put the pixels at the bottom of the skin - 31 pixels. As well is the top automatically 31? And I cannot find anywhere how I set or just say what will be the table of contents.
I hope someone can help here. Checked several assignments and do not see this issue.
Thank you.
Hello
It's definitely somewhere in these forums. In the current version of the CP (you use CP4, since you're talking about the table of contents) you cannot change the width of the table of contents: there always 250pixels for the width. If you use the separate option for the table of contents, these 250px will be added to the width of your movie captured, if you use the Overlay option, it does not change the width.
In CP4, if you use the horizontal play bar (I prefer navigating through the table of contents), it will add about 30 px at the height of your movie, given that the play bar is always outside the movie (unlike previous versions). THAs is what you're talking about, I think you see this in the options for borders. For the default playback bar it is indeed 31px. The top, left and right borders do not exist in the default settings. If you add them, you can also choose the width of these other borders. The lower border is only thick because of the presence of PlayBar in this border. I think, if you add other borders, you not like the look of these thick borders and reduce them to maybe 2 to 5 pixels, so much less pixels will be added.
I hope that clarifies something?
Lilybiri
-
WMP will open the VTS_01_1.VOB and stop at the end of this file
I don't know if this is the place to post this question, but it's here.
I created a web page that lists the cover images all my DVDs that I have on an external hard drive and each cover image is related to the first file VTS_01_1.VOB for this DVD.
I test page to see how it works for each device I have. The page works perfectly with my tablet from Samsung, the player on the Tablet, I installed automatically go VTS_01_1.VOB, VTS_01_2.VOB and so on until the movie is done.
If I use my pc Windows 7, WMP will open the VTS_01_1.VOB and stop at the end of this file, how can I get WMP to continue to the next file automatically?
Personally, I would check the source code of the Web page of the first.
Paste the full path to the video_ts.ifo file in a new MS Word document and save it as htm. Then run the file [it should open in your default browser], then right-click on the page and select view source. Find the link - it should look like
href ="... / SomeFolder/VIDEO_TS. IFO "> D:\SomeFolder/VIDEO_TS." IFO
assuming that D:\SomeFolder/video_ts.ifo is the text that is displayed for the link
Then go to your actual Web page and discover its source to verify that the link contains this model.
If the solution is not as simple as that, then you will need to post a question in the section Web & networks of this forum I don't know enough about writing for the Web page.
To increase the chances of getting there help please include a description of what happens when you try to click on the link - rather than 'will not work.
-
Bookmark star has disappeared from my toolbar and can't find how to retrieve
The star to bookmark on the right side of the toolbar has disappeared. I have read the bandages and can't find anything on how to pin it to the taskbar. I restored the toolbar, and it did not reappear. What should I do to get it back. The bookmark tab is not a practice.
Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.
- Firefox menu button > Options
- View > toolbars (press F10 to display the menu bar)
- Right click on empty toolbar space
Use the toolbar (Customize) to open the Customize and set the toolbar to display items.
- Make sure the "bookmarks toolbar items" are on the personal bar
- If "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the palette of the toolbar in the window the bookmarks toolbar Customize
- If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
- If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration
-
Yontoo technology can I trust them?
A quick search on Google around indicates that most people think that Yontoo layers is safe but slow down your computer. Personally, I do not recommend installing add-ons and toolbars and you must be very careful about installing apps from Facebook, as many of them are malware. If you really feel that you can't live without this add-on rather gadget, looks like that is not malware. MS - MVP - Elephant Boy computers - don't panic!
-
Photoshop crashes for almost 15 seconds, when using layer > Group layers or Layers Palette > layers command group. NOT on creating new group and creation of layers and n-drag-drop group manually in the Palette layers. Got a file of user interface design with close to 800 layers and lots of groups. This doesn't happen in smaller files. Using OS X Mavericks, Photoshop, CC 2014.2.2, mi 2014 15-inch Macbook Pro Retina.
I understand that the solution would be just to cut the file into smaller files and design each display of the user interface in a separate but file which would be painful. And it doesn't seem to be a very difficult task to just the layers in group.
OK, the first thing to try: disable the generator in the preferences of hiking (under Plug-Ins, at the top).
On my system, generator never took and a week to read information on all layers and is particularly slow on text layers.
-
How can I find the palette layers in PSE 8?
Hello
I use Photoshop 8 editor and try to create retro-style/technicolor images by using the palette layers and creating grayscale images have disappeared through red, green and blue filters and then colorized the (as described here: http://www.youtube.com/watch?v=wJQj2ykF7fs). I'm looking for the palette layers.
Thank you very much for your help!
Elements not channels. It takes the video on Photoshop. However, you can add an array of strings to PSE using tools of either Grant (free):
http://www.cavesofice.org/~grant/challenge/tools/index.html
or elements + simplephotoshop.com (inexpensive, does several other things that the tools of Grant).
-
Where the Palette layers?
I use Photoshop prim. 10 with windows 7. I try to use the full edition, but cannot find the palette layers. How to retrieve it? Thanks for any help. Betty
Title of the message was edited by: Brett N
The default location for the layers panel is at the bottom right of the Editor (in full edit mode).
If you do not, it may have been hidden or reduced to a minimum. Try going in the window at the top menu and select layers in the list. This should display or maximize the Panel.
Maybe you are looking for
-
Tecra S1 - problems with the touchpad after update BIOS to 2.50
HelloAfter the BIOS-update to version 2.5, the touchpad does nothing. From the docking station, the l' option option mouse PS2 works without any problem. Starting late, the touchpad no longer works. Normally - before the update - the touchpad began i
-
Original title: error NET HELPMSG 3521 while checking the Update Service was stopped. Windows Vista. 32-bit, SP1 and 2 Long story short, I tried to fix my problem of update windows since the beginning of July 2011. My computer does not stop when you
-
Cannot get past windows security user name and password request window to access messages
Windows Vista - outlook express. Can not access my e-mail because of the pop-up page without acknowledging my username or password security?
-
Are there any apps running that allows me to use the GPS watch and offline maps? I don't want to carry my phone during the race...
-
Problems with fluctuating volume of Windows Media Player
After that I transferred MP3/WAV files to my old laptop which has Vista... for my new laptop which has Windows 7, my windows media player then started acting crazy during playback of music files. The volume goes up and down, and during parties stron