my USB not conectec driver doesn't instal no eror show usb device not shown usb me

Similar Questions

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl

• USB driver on my pc not shown when connected

  I've always been able to connect my MP3 with my USB to my system to download my music files, but lately when I tried this, it does not work. No mp3 symbol or it does not load the internal software. Help, please

  Hello

  Set the MP3 MTP Mode for WMP11 sync - mode MSC to treat the MP3 as a reader.

  ----------------------------------------------------------------------------

  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  -------------------------------------------------------------------

  If the above does not work (and it should be considered the preparatory work).

  This works for any MP3 player when the USB stack is not corrupted:

  1 player to delete and restart computer - switch to MTP mode on your MP3 player

  Regardless of what brand of MP3 you have

  1. check this Just In Case

  http://KB.SanDisk.com/app/answers/detail/A_ID/42/kW/E200 * / page/2/r_id/101834

  2. does not present (web page as reference)

  http://KB.SanDisk.com/app/answers/detail/A_ID/192/related/1/kW/E200 * / page/2/r_id/101834

  In XP: Start - RUN - CMD

  In Vista: (Do this way!)
  
  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  Copy and paste this command into windows XP or Vista CMD - press enter

  NET local service localgroup administrators / add

  3. then follow:

  http://KB.SanDisk.com/app/answers/detail/A_ID/139/related/1/kW/E200 * / page/2/r_id/101834

  I hope that your MP3 now works.

  -------------------------------------------------------------------

  Only if necessary:

  Try a system restore before what happened:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic__

  device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic
  in troubleshooting, he said I must be connected to the internet, which I am connected via my LAN with yellow cord. If anyone knows how to solve this problem, it would be much appreciated. Ive called microsoft and they were lying to call back me within the hour and im still waiting for them :(

  Hello
  Direct link to the site Reltek with drivers below:
  Driver Realtek RTL8192E for Windows7 here

  Always the best choice is to use the drivers from your motherboard, desktop or mobile site.
  Second place should be device site producer.
  Last chance is updated for Windows.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I just installed Windows 7 on a part of the Dell Vostro 1500, l features notebook.__In control, I have two mistakes "Device Base system has not a driver" __There is no driver installed for the Base system device. _ No fixed

  I just installed Windows 7 on a Dell Vostro 1500 laptop.
  In the pane control, devices of l, I have two errors "device Base system has not a pilot.
  There is no driver installed for the Base system device. Not fixed
  Apply the solution to the complete driver problem
  Install a driver for this device does not work

  Troubleshooting gives me two messages:
  The first is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0592 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0BF0
  Error code: 28
  The second is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0843 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0AF0
  Error code: 28
  I cannot locate a driver through web search - how do I know what are the devices? and where can I find a driver?

  Try to update the drivers using Windows Update.  If this does not work, try the versions of Vista of Intel and Ricoh under Chipset drivers on the website of downloads & drivers for Vostro Notebook 1500 . Make a restore point first.

• 'The installer does a not install automatically the mouse driver.  This driver must be installed manually. »

  I just installed VMware Workstation 7.1.3 and when I upgraded VMware on a Windows 7 Ultimate x 64 guest tools, I received the following error message:

  The Setup program has not automatically install the mouse driver.  This driver must be installed manually.

  Everything seems to work fine and there is no problem, indicated in the Device Manager.  My mouse driver (i.e. the VMware pointing device) is v12.4.0.6 and is dated 17/11/2009.

  Someone else has encountered this and is there a solution for this?

  Note that VMware Tools installed in Windows Server 2008 R2 x 64 with no problems.

  Rob

  Microsoft install (MSI) is a strange thing, these problems occur.

  The best way to update the VMWare Tools is to delete (and all other Windows drivers too), then install the new version.

  There is no solution to your problem.

• HP Support Assistant is unable to install the drivers wireless wireless device not recognized at startup

  Name and product number:

  HP Envy Sleekbook4 PC / / C2K72UA #ABA

  Intel Centrinto Wireless-N 2230

  Microsoft Kernel Debug network adapter

  Realtek PCIe GBE Family Controller

  USB - IF xHCI USB Host controller (Intel WiUSB)

  Inter 7 series / C216 Chipset Family USB Enhanced Host Controller - 1E26 (there is a similar device that works but ends with 1E2D)

  System Operalting:

  Latest Windows 8

  No error message.

  Changes:

  Uninstalled some things via the control panel (I don't know where I can find a newspaper which has been uninstalled)

  Attempt to system restore and it failed.

  My diagnosis:

  First of all, some info on why the devices do not work.

  The USB controller claims there are insufficient system resources to complete the API. However, I am only using about 20% of my memory and my hard drive. If I deactivate and reactivate the device through Device Manager it starts working until the computer passes in mode 'sleep' or reboots.

  The Realtek PCIe controller and Intel Centrino Wireless adapter simply read {operation failed}. If I disable and re-enable these devices via Device Manager they begin to work until the computer mode "sleep" or reboots.

  The Microsoft Kernel Debug network adapter "is not present, is not working properly or is not all its drivers installed."

  Intel WiUSB - windows cannot load the drivers for this device (code 31).

  The HP support assistant tries to download and install "Wireless for windows drivers 8. The download succeeds, but the installation fails.

  At startup, windows thinks that there are no network adapters (other than bluetooth). After the reboot of the devices from the Device Manager, they appear in the section of the network adapters.

  Thank you in advance for reading this and any help you may be able to offer,

  Tim

  I see. Unfortunately, the failure of the short DST means that the hard drive needs to be replaced. The computer is still under warranty?

  If so, you can contact HP Technical Support and ask them to send you a replacement. This replacement will come with recovery media. If you don't have an external CD drive, make sure you request a recovery rather than recovery disks USB. They should know that the model already, but, I would make sure. Once you have received the new hard disk, you will need to send the back of an old man in this same area, using the provided shipping label. The technician on the phone will give you the details on that.

  HP 1-800-474-6836 Technical Support

  If the computer is out of warranty, you can replace it with any HDD notebook 2.5 ". If you need help choosing a car, let me know

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 1410 driver won't install, used for ok

  1410 all in a CN56AB80HC Q7288A connected by USB to computer toshiba laptop running on vista 32-bit

  printer has been interference problems (do not paper) and who need to be removed - that took some time.

  Now printer will be installed automatically or with the disc.  When I try automatically, it takes a lot of computer memory and after a few minutes it comes back with the brand and model as the first list.  When I try with disc it try to install using the pilot share insta and fails with the error 0 printer driver x 00000002 could not be installed.  Thank you, b0b3202

  Removal of the printer in the printer folder is not actually remove the printer. WHA tyou are this removes the print queue of the printer. The driver is still installed and the operating system that always knows when you plug / unplug the USB cable it should / reconnect resources used by the printer. If a print job is stuck in the print queue and selecting Cancel does not work here is the options you can use.

  1. turn off the unit for a few minutes and the timeout must print spooler and cancel printing.
  2. Click Start-> run and enter the following command

  net stop spooler

  This will stop the print spooler and delete all work. After that a minute or two enter the following

  net start spooler

  This will restart the print spooler. When you restart, it is essentially what is happening.

  You should not need to delete the print queue of the printer in the Printers folder. If you do, you can add it by using the Add Printer Wizard and select the local printer with USB port and in the list of drivers HP of the selection as a manufacturer and your model in the list. It might be near the bottom with something like "HP psc 1400 series ' in the name.

• Impossible to install a printer over a network; requires a driver must be installed.

  Recently I got problem with my printer, so I removed and have reinstalled the software. The printer is now works great on the host computer network.

  I have a home network and I want to share a computer, I already checked the box on the properties of the printer for printer sharing. I wanted to add my printer to another computer through the network from my computer, but it would not allow me. I tried to change the permission settings, but it doesn't are not all the parameters or tabs in printer properties that allow me to change anything either, so I went straight to the other computer and he DID I would add a computer on the network, but after I selected the printer to add and clicked on OK another message appeared and he said that my computer does not have the correct driver. INF installed and he asked me to look it up.

  I'm stuck because since this is a computer on the network and not the host computer that can have the file, I don't know how to access my computer through another computer on the network, and I do not know which file is in application or how to find it.

  * Thanks in advance for reading and using, any idea, advice and assistance are greatly appreciated! :)

  Host Info:

  Windows XP Media Center Edition 2005 SP2

  Computer info network (one that I am trying to install the printer on):

  Windows XP Home Edition SP2

  News of the printer:

  HP Photosmart C4180 all-in-one

  I go to the HP website and just download the right driver from there.  It will probably be the simplest solution.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• I am trying to play call of duty world at war, and he said video card or driver doesn't support UBYTE4N vertex data.

  I asked a bunch of people and they said to update. It saids

  Getting Direct3D 9 interface...
  Pixel shader version is 2.0
  Vertex shader version is 0.0
  Video card or driver does not accelerate the transformation and lighting.
  Video card or driver doesn't support UBYTE4N vertex data.

  Error during initialization:
  Video card or driver doesn't support UBYTE4N vertex data.

  Hi Jbrown_98,

  You can download and install the latest chipset and graphics drivers for Windows Vista and check if this solves the problem.

  Here is the link to the Intel Web site to download the drivers:

  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Let us know if it helps.

• icloud drive doesn't sync from my PC

  iCloud drive is simply not sync with my PC.

  When I open iCloud drive in Windows and then open icloud.com (OR on my iPhone for example) there are a SEVERAL files and folders that I created in Windows but that exist all simply not icloud.com (OR on my iPhone for example).

  There are SOME files that I created the MONTH there, who are just not there.

  When I check on iCloud for Windows, it does NOT there are currently all the files being downloaded.

  It says "update 04/27/16, 12:15 (THREE days ago)."

  It is beyond humor to Apple to simply have a "PC refresh" option within the iCloud for Windows program?

  Without hope.

  Hi jon_leigh,

  I understand that the files and folders that are created on your Windows PC are not always appearing on iCloud.com or your iOS devices. Fortunately the steps below can help to restore the functionality between your PC and iCloud.

  What happens if my files don't upgrade to iCloud?

  Check these things first:

  • Make sure you have an active Internet connection on your Mac and your iOS device.
  • Login to iCloud on all your devices and turn on iCloud drive.
  • Install the latest versions of Pages, Numbers and Keynote. See what versions of Pages, Numbers and Keynote, you can use with iCloud Drive.
  • Make sure you have enough storage iCloud. If you exceed your limit, you can improve your iCloud-storage space.
  • Create a new document and save it to see if it downloads to iCloud. If so, see if other documents to begin the download.

  If you have tried these steps and your files do not download to iCloud:

  1. Stay connected to iCloud.
  2. Save your updated files to another folder on your Mac or PC.
  3. Contact Apple technical support.

  Get help using iCloud drive
  https://support.Apple.com/en-us/HT203052

  Kind regards!