USB driver on my pc not shown when connected

Similar Questions

• I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

  I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

  The requirements for the SuperDrive Apple USB are:

  The system configuration required

  Compatible with the following computers:

  MacBook Pro with the Retina display

• iPhone not charging when connected to the computer via USB

  Original title:

  I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

  Hello

  1. are you facing problems with USB devices?

  2. that you get an error? If Yes, what is the exact error message?

  3. is your phone detected in iTunes?

  4. doesn't Windows detect the iPhone as storage medium?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to plug it into a different USB port and verification.

  Method 3:

  Check out the following link.

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  I hope this helps.

• error code 43 usb not recognized when connecting usb (sd card) with asus X55C laptop.

  Hi, I'm 43 error code while the plugin my usb card with asus computer laptop X55C. I tried several methods indicated on the window on the error code 43 site but I have not any solution even took me out of my laptop battery usb recognize, but it did not work. I uninstalled the Device Manager usb driver, but it also does not work please help me.

  Hi Daman,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur is because of corrupted USB drivers or incorrect settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Download and update the chipset and drivers USB of your computer from these links and check the issue.

  Driver Chipset
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=23&F_NAME=Chipset_Intel_Win7_64_Z9301020.zip#Chipset_Intel_Win7_64_Z9301020.zip

  USB driver
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=22&F_NAME=USB3_Intel_Win7_64_Z103214.zip#USB3_Intel_Win7_64_Z103214.zip

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• FDM 11.1.2.2 fdm adapter not shown when the location is created

  Hello

  FDM 11.1.2.2 fdm adapter is not displayed when the application is created in places

  I'm so when I tried to import data to test data access error

  and in the error log saying his request does not exist

  Please help me solve this problem

  Couple of solution to try

  1. recreate the import format and then reload again as sometimes get corrupted as well.

  2. place an excerpt from the sample of data to load into the Inbox and see if it load successfully.

  3. the account that you use to connect to SQL must have read access as when Bulk Insert is used, FDM creates two temporary files, which is the .tmp file referenced in your error message. The .tmp file is an insert in bulk. In order to run an insert action block in SQL, FDM uses the network account that runs the MSSQL Server service. Account goes off in the Inbox of FDM, reads the file and them slap it in the database.

  Thank you

  ~ KKT ~.

• vcomposer server not shown when deploying vm clone related

  Hello

  I installed the server vcenter and vcomposer on the separate virtual machines and their databases are on another virtual machine. (set on a sql 2014 VM server)

  now the deployment of virtual machine using the linked clone method, vcomposer server not shown in the view manager?

  TNX

  VMware View 5.0 Documentation Centre

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• We get an error "device is defective, Windows does not recognize ' when connecting Smartparts SP1100B 11

  * Original title: Smartparts SP1100B 11 "LCD Digital picture frame

  AC power cord pluged, switch works / stop, photo do not shine as if no power is being photo frame. I pluged USB cord in my PC and it says device has malfunctioned and Windows does not rscognize it. It is compatible to my PC system. What should do?

  Hello

  I suggest you to follow the steps below and update us with the results.

   

  Method 1: Run the hardware and devices Troubleshooter and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Run Microsoft Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/GP/hardware_device_problems

   

  Method 2: Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  a. click Start, type device in the area Manager Search , and then click Device Manager.

  b. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  c. Once complete, restart your computer. Your USB controllers will automatically install.

  d. check the issue.

  Let us know if it helps!

• GPIB has not detected when connected to the internet

  Hello

  I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

  Hello

  This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

  http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

  You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

• 'not supported' when connecting computer to TV

  Original title: HAVING BAD RELIANT MY COMPUTER to MY TV Please HELP IF YOU CAN!

  When I try to connect my computer to my HD TV it says no 'supported '. I'm confused because I always connect my computer to my TV to watch movies online, but now for somereason I don't know why it is not currently supported. I tried to change the resolution to the most humble, above and between the two, but still can't seem to find the problem, please help someone... Please, thanks in advance!

  Hi Christine,

  -What is the exact error that you receive when you connect the computer to the television?

  Most likely your Windows is set at a too high resolution for your TV to manage. When a TV meets a too high resolution display, it displays nothing.

  Please try the steps mentioned by Aziz N in

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/format-not-supported-cannot-connect-the-computer/c0508fc0-2851-43C1-95bc-b059a404c0b6?msgId=93bc69bc-3D40-4174-9527-a2d47a0eaa04

  http://Windows.Microsoft.com/en-in/Windows7/connect-your-computer-to-a-TV

  Hope this information is useful. If you have any questions, please let us know.

• R7000: UPNP Renderer not visible when connected via WiFi

  Hi all

  I use the R7000 as a router and I have the problem that my UPNP renderer (Denon DNP-F109) is not visible if connected via WiFi (via Ethernet, everything works very well).

  Can someone give me a clue what to do here?

  I went on DHCP and UPNP in the configuration. All UPNP (Server/converter/controller) devices are in the same 192.168. * network.

  Thank you very much

  Stefan

  Hello Stefan,

  Please perform a reset of the device and check again if still the same problem.

• T6i does not appear when connected to Windows 10 PC

  I plugged my T6i camera to my PC with the supplied cord, but the camera is not displayed on the PC.

  I'm on Windows 10 with the camera 1.0.0 firmware version (I don't know if there is a newer version of the firmware)

  Device Manager does not display badly connected devices.

  Any help would be appreciated.

  Thank you.

  Solved.

  WiFi should be disabled on the camera.

• external hard drive is not displayed when connected

  I have a WD My Passport external hard drive. He pointed upward and it worked fine. Two days ago my MacBook Pro started acting strange and became UNBELIEVABLY SLOW. Now it is still slow with some programs, and when I plug in my external hard drive it won't even appear on my desktop or the finder. I restarted my computer - has not yet shown and I stop everything, everything, including the power cable disconnected, is to let it sit for a few hours, transformed, plugged return it in and still don't appear. It has pictures and that's what I use to store photos that I have him Add. I need help! I am a photographer and it is essential that it works! If anyone has any suggestions please let me know! Thank you for taking the time to read this and any help! Thank you!

  Does show in disk utility?  Have you plugged into another Mac?

  Ciao.

• USB device not recognized when connected to Toshiba Port Replicator II

  I recently bought the Replicator above, loaded the software, restarted my computer and only then connected the device according to the instructions.

  I get the error message "unrecognized usb device".
  When I go in my gear and check for driver for this device 'unknown' told me that no drivers have been shipped for her

  So my Replicator does not.
  I deleted the software and reloaded with the same result

  I have a laptop Tecra A8 running Windows XP Service Pack 2
  Any help or suggestion would be appreciated

  As much I know PortReplicator II only is not supported for Tecra A8. According to the sustained specification is Port Replicator III + only.

  If you try to use the option not supported, it is not easy to give any help.

• iPod 4th generation not recognized when connected to a USB port.

  Original title: question

  When I connect my ipod 4th generation in the usb port a message out saying that it recognizes not it. I tried everything and it still refuses to recognize my ipod. What should I do?

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  ---------------------------------------------------------------------

  For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows.

  Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
  (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

  Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external symbol
  drive and PSG that is the parameter to use to sync with WMP. Remove the MP3 and charge it the
  computer. Change the MP3 in MTP mode - it power off and plug it in.

  ======================================

  There is a plugin to let WMP sync music to an iPod:
  http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

  WinAmp supports iPod
  http://www.Winamp.com/

  How to use Winamp to manage your iPod
  http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

  WinAmp - Forums
  http://forums.Winamp.com/

  6 ways to synchronize your iPod to computer without iTunes
  http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">