my video and streaming does not work correctly, always stop.

my video and streaming does not work properly, his game and stops all the time.

Advertisement

Hello

1. this happens when you play movies or videos saved on the computer?

I suggest you to follow these steps and check if that helps.

Method 1:

If this happens when you stream or watching videos online, then I suggest you day flash player latest version and check if it helps:

http://get.Adobe.com/flashplayer/

Method 2:

If the problem occurs even when you try to play the recorded video on the computer, then try to update the latest drivers for the video card and see if it helps:

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

For more information, see this link:

http://support.Microsoft.com/kb/2532294

It will be useful.

Tags: Windows

Similar Questions

  • Videos and games does not work, Mac Snow Leopard

    It is a problem, that I actually had for a while, but it never really touched a large part that I thought it was important. Now it is just boring.

    In fact, some video players and games online does not work. Most video players outside of YouTube will not work. The player will load, but the video never does. For example, the last video with that I got in trouble is the video player of Nickelodeon for the legend of Korra. When I try to watch that, I get a black box and an image of type "Loading" appears, swirls around once and then disappears. After that, it becomes unresponsive. This is typical of many, but not all, video players, I met on the web.

    I don't know if it's related, but I also had problems with various games. Often times, they work very well until at some point, as the end of a level, transition and then they will become numb. A good example here is the game Bloons Tower Defense 4. It is a game that I know was on my old system. But now, when it loads the level, it freezes before loading the tours available to place and reacts differently. An example is shown below. The box top-left question mark in the right sidebar should reveal a dart monkey and my money of departure must be filled, but instead, the game crashes to the top. I had similar blockages on a number of games, so I am sure that the problem is not just with this game.

    btd.png

    As I said, I had this problem for awhile now. I have updated Flash and my browsers several times since they started. I have these problems in all my browsers (Safari, Opera, Camino, Firefox), there seems to be a problem with Flash. I also tried to uninstall and reinstall flash, and disable all other plugins browser.

    I use a MacBook Pro with Macintosh OS X 10.6.8 leopard snow, 2.53 GHz Intel Core i5, with Flash 11.2.202.233. Current browsers: Firefox 11.0, Opera 11.61, Camino 2.1.2 Safari 5.1.5

    Any ideas what I might be dominant?

    These errors make me think that Flash has problems to write to the folder were Flash cookies are stored (LSO, sharedobject).  On Mac, it's

    • ~\Library\Preferences\Macromedia\Flash flash
    • ~\Library\Caches\Adobe\Flash flash

    You can check the permissions for these folders?  You might want to run check the permissions on your disk (http://support.apple.com/kb/HT1452), and then delete the ~\Library\Preferences\Macromedia folder and the folder of player of ~ \Library\Caches\Adobe\Flash.

  • Satellite L40 - Sleed and standby does not work correctly

    I have a portable Satellite L40 and it worked correctly until now. I turn and after I have put on standby (stand-by) mode; When I want to use my system, so to get that back to normal (I press the turn power button to exit the mode "standby" button), Windows Vista 32-bit restarts - it is not back to the moment I left it before the "sleep mode".

    Therefore, restarting Windows Vista 32-bit, and the screen "Windows has been disabled incorrect" appears instead to return to the configuration of the system that let him before sleep / standby mode.

    What can I do to fix this and make "sleep" mode works correctly?

    Hello!

    In your case, I'd do a BIOS update. You can search for updates on the Toshiba site
    http://EU.computers.Toshiba-Europe.com

    You should also look into the mangment of power. Here, you configure what happened when you close the screen, press the power button and so far.
    I found a great thread on this topic:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141529𢣙

    Good bye

  • Backup and restore does not work, it always tells me to choose another point restor and try again.

    Each restore point I try he always tells me to choose another point of restor and try again.

    . Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
    -
    Microsoft has suggestions and offerings to
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
    -
    Moderator Forum Keith has a few suggestions along this line to
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
    -
    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
    -
    You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
    -
    Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
    `
    I hope this helps.  Good luck.

  • isInitialRender and isPostback does not work correctly.

    Hi, I have a problem and I wonder why this happens...

    After each request, Builder of backing bean is running again. In the constructor, I have a block that I want to run only at instantiation. I tried to solve that with isInitialRender and isPostback, but they are useless, anyone works not properly, can explain why the constructor is called after each request?

    The problem is that you shuold not to put any code in the constructor of the bean. You cannot predict when the bean is instantiated, this can occur at different points in the life cycle and depends on the scope of the bean from 0.

    You can use the technique where you load the data the first time it is accessed. In the Get accessor, you check to see if the value you're trying to get is zero, and if this is the case you call a method that initializes the data before returning.

    Timo

  • Poloroid MP3 does not work correctly.

    Original title: connect a MP3 player to the poloroid mp3 files

    Sorry for the caps, my problem is I just got a Poloroid MP3 and it does not work correctly as no movement between the icons etc. Y at - it anykelp like a download or something I can put it on its feet again. Thank you very much

    Gary lumbard... e-mail * address email is removed from the privacy *.

    Hi Gary lumbard,.

    Thanks for posting your question in the Microsoft Community Forum.

    According to the information of Polaroid MP3 player does not work on your Windows XP computer.

    Since you are faced with the question with player MP3 of Polaroid, you can get in touch with ato Polaroid supported if verification updates is available for the player and for further assistance.

    Polaroid support

    Hope the helps of information.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

    I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

    Hello

    Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
    Note: This will be you temporarily disconnect all sites, you're connected to.
    To clear the cache and cookies to do the following:

    1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
    2. Under "Time range to clear", select "all".
    3. Now, click the arrow next to details to toggle the active details list.
    4. In the list of details, see the Cache and Cookies and uncheck everything.
    5. Now click the clear now button.

    More information can be found in article to clear your cache, history, and other personal information in Firefox .

    This solve your problems? Please report to us!

    Thank you.

  • loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

    loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • My gesture control function does not work correctly there on and off automatically

    My gesture control function does not work correctly there on and off automatically

    which application you are using? try reinstalling the media gallery.

  • My DVD player does not work and all the information I can find is "this device does not work correctly.

    Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

    I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

    I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
    entries that do not fix the resolution of problems and those who "could" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
    There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
    Parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

    When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

    Hello

    Try to uninstall and reinstall the network adapter drivers.

    Download the latest drivers from the card manufacturer support page.

    Download the drivers and extract them to a folder of your choice.

    In Device Manager, right-click on the adapter.

    Click Update drivers and choose her browse my computer for drivers.

    Choose let me a list of choices, click on disk and point to the folder with the drivers.
    ---------------------------

    Computer network health.

    Check the Device Manager for the entry of valid card of the wire.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

    Turn off the computer and the router, reset the router and the computer.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    On the State of intellectual property.

    TCP/IP and its variables usually look like this.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    Typical TCP/IP status looks like this.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    Physical address
    is the MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1.
    IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ------------------------

    Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted

    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

    I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

    The last thing you want to do is install and run any third tuneup/Optimizer program.

    In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.

  • Microsoft Teredo Tunneling adapter does not work correctly and my pc works too slowly to start and stop.

    Original title: hardware device

    Please help me...

    My Microsoft Teredo Tunneling adapter does not work correctly... I tried to reinstall it but it is impossible to install...

    So what to do so adpter may work correctly...

    And my pc runs too slowly (at startup and shutdown also)

    Help help me soon...

    Thank you...

    Hi Harshhh36,

    Usually, after the computer restarts, the drivers install automatically and it will stop the errors.

    You can also refer to the computer or the network card manufacturer's Web site to download and install the latest version of the drivers for the network card.

    You can also check in the updates of windows updates available for the network adapter driver.

    For more information, see the article:

    Automatically get recommended drivers and updates for your hardware

  • My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

    My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

    Hello

    Make sure that Photoshop is closed.

    1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

    You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

    2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

    It should be working fine now.

    Thank you

  • You just bought Photoshop and it does not work

    I just bought photoshop today and it does not work. When I open it, it remains open for 30 seconds and then a window pops up that says: 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "and then it ends. I tried to uninstall and reinstall, as well as restart my computer. Nothing has worked. I'm currently waiting at customer service... but I've been waiting for half an hour. I am really frustrated because I just bought this... Lightroom works fine.

    1. Click Start.
    2. On the Start menu, click run.
    3. In the Open box, type "dxdiag" (without the quotation marks), and then click OK.
    4. The DirectX Diagnostic tool opens. Click the view tab.
    5. On the view tab, information about your graphics card are indicated in the Device section. You can see the name of your card, as well as the way in which a lot of video memory, there.

    Once you know the kind of graphics card you have, visit the manufacturer's Web site to download the latest version of the driver. Here are the links to download the drivers from the manufacturers of most common graphics cards:

    To move the trial to your purchased version, you will need to connect with the Adobe ID and the password on your CC account.

    Usually under help > Sign In part of Photoshop or in the creative Cloud Desktop application.

Maybe you are looking for

  • LaserJet 1102W Pro - can't get the blue light at all

    I do the initial installation of a Pro LaserJet 1102W.  I created another without difficulty.  After a reset to the default values and an update of the firmware, I can not even a flashing blue light indicating the necessary wireless configuration.  T

  • Disabling the keyboard to come up automatically

    My request is not able to function properly because the virtual keyboard of the alpha of dev ceases to appear automatically on the touch screen. How can I disable it. My application is done using JavaScript/HTML. Help, please. Thanks in advance.

  • How to connect my PC to my C309 printer via ethernet directly? Radio failed.

    I determined by the troubleshooting report network that the interface (Wifi0) wireless network does not work properly, and the likely cause is that the wireless radio has failed.  I delected original printer and reinstalled as a directly connected pr

  • no internet access microsoft 8

    In the last few days my laptop with windows 8 is a not granted me access to the internet. My WiFi is turned on and my network is connected. My laptop with windows 7 works very well (that is how I am able to send this message) My Internet Provider (AT

  • To check the superposition of polygons in Oracle

    I have a table 1, which has a field such as store number and geometry, and there just one record in it. Now, I want to check this store to table 2 number and identify if there are polygons which overlap to this particular store number polygon and ins