my wifi guard stop and say limited access, how can I solve this problem?

Similar Questions

• After that update it tells me that the updates did not and he comes back, how can I solve this problem?

  I do automatic closing his day, the computer has not been connected in recent years. 46 updates downloaded, when I turn it on it tries to configuire updated and fails. He then returned back. How can I solve this problem?

  Hello

  What is the accurate and complete error message?

  Method 1:
  You can see the knowledge base article and check if it helps:
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 2:
  You can stop the automatic update and install an update at a time and restart the computer to verify the update is causing the problem.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off

  You may need to temporarily disable the antivirus software updating.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

• cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

  Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name

  Hello

   
  • What operating system is installed on the computer?
  • Have you tried with another name?
  Go to network and sharing settings and check the name of the previously defined network.
   
  Try the following steps to do the same thing:
  a. right click on the Network icon located on the bar spots.
  b. click on open network and sharing Center.
  c. under view your information network base and installation connections check information (network name).
  d. try another name in order to set up a network.
   
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
   
  http://Windows.Microsoft.com/en-us/Windows7/products/features/networking
   
  I hope this helps!
   

• I have sent and follow my pdf to a recipient, now I can't change like my pdf, it is said that I am limited to do so, how can I solve this problem?

  I have sent and follow my pdf to a recipient, now I can't change like my pdf, it is said that I am limited to do so, how can I solve this problem? When I go to my saved PDF file and try to edit it, I get a message that says that this feature of document in Adobe Acrobat Reader ms document has been changed since its creation and use out functionality is no longer available. For the original version of this document, please contact the author. I am the author, and I can't edit my document what should I do?

  Hi scottk48497237,

  You cannot modify PDF documents by using player application.

  You will need Acrobat free trial download Adobe Acrobat application | Acrobat Pro DC to edit files PDF using Acrobat | Edit PDF files.

  Kind regards
  Nicos

• Hi why my iphone wifi turn off automatically when I lock my device? And how can I solve this problem

  Hello

  Why my wifi from the iphone 6 turn off automatically when I lock my device? And how can I solve this problem?

  Yes, it's designed for it. If, however, you plug, WiFi will not drop when the screen is locked.

• WiFi disabled by lan/wan switching. HP 8470p. How can I solve this problem and turn on WIFI?

  HP 8470p.

  Attempt to activate WiFi.

  Radio wireless LED (front left edge) is white and on

  HP connection Manager message-"wifi disabled by lan/wan switching."

  How can I solve this problem and turn on WiFi?

  Thank you

  Hello:

  Go into the BIOS and change the active LAN/WLAN switch setting to disabled.

  Save the setting it by hitting the F10 key and again when you exit the BIOS (save settings and exit).

• I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.

  It comes with Vista, upgrade install and activate Forum.

  Try in Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon. Mick Murphy - Microsoft partner

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• I have iOS 10 and I am still unable to make messages with animation effects. How can I solve this problem?

  I have iOS 10 and I am still unable to make messages with animation effects. How can I solve this problem?

  Without knowing what is happening when you try, it is difficult to recommend troubleshooting. However, one of the first steps is to ensure that you don't have to reduce the Motion activated in accessibility.

• My iMac will stop automatically after a noise noisy fan for 10 minutes.  How can I solve this problem?

  My IMac will stop automatically after a loud fan noise.  How can I solve this problem?

  Runaway applications can shorten the battery life, affect performance and increase the thermal activity and the fan.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• Windows XP: I have 448 MB of RAM available. What happened to the 64 MB of RAM lack and how can I solve this problem. Thank you

  I am trying to install application constant guard Internet Security of Comcast.  After trying to download and install the product, I get and RAM error message indicating I need 512 MB of RAM to install this product, and I only have 448 MB of RAM available.  What happened to the 64 MB of RAM lack and how can I solve this problem.  Thank you

  The only way to see more of RAM is to install a graphics card and disable the onboard graphics of your motherboard. If you do this, you should be able to see all the 512 MB of it.

  That being said, I will repeat what I said before...
  You can always buy more RAM and install it on your motherboard. Go to crucial.com for more information.

  In addition, you should review install 'Internet Security' application or suite. They are not necessary (you can easily configure Windows so that it is very safe) and they often ruin the performance of a PC.

  If you want advice in "hardening" your PC security, let know us.

• I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. How can I solve this problem.

  I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. If restore system 2 or 3 days before this date my document becomes available. How can I solve this problem. I have a user and admin in this system. But the user has the power to admin. I use Windows XP.

  Hello

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  Follow the steps from the link below when you receive the error and check to see if this helps: how is ownership of a file or folder in Windows XP: http://support.microsoft.com/kb/308421

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.