MyFileName.mdf is not a primary database file.

Similar Questions

• move the primary database files to another location

  Hi all
  
  I move the files of my primary database to another location on the same server, but on a different drive (from f: to G :) with rename comand but file name will be the same, after you have moved the files what step I need to perfom on standby DB will have on my database pending?)

  This doc is everything after you rename the primary file, I'm not rename all the files I need to just move file from one place to another without changing the file name.

  I hope you know how to move files from one place to the other on the primary database. It's not just copying the files from one disk to another and then to go to the top of your database.

  You rename your data files or copy it to another location, how the controlfile to know you have copied/renamed to a different location?

  I guess you 1 to ask the question of how to move files to a different location in primary education and then move on standby.

  Steps to follow:
  1 Hope you brought your primary database.
  2 copy the datafiels to one disk to another.
  3. attach the primary database.
  4 rename all data files that you moved to this control file would know the changes.
  SQL > alter rename file 'G:\oracle\user01.dbf' to 'F:\oracle\user01.dbf ';
  5. subsequently open the database.
  Refer this to move data files from one place to another http://www.orafaq.com/wiki/Move_datafile_to_different_location, http://www.adp-gmbh.ch/ora/admin/move_datafiles.html

  on autonomy in standby:
  1 cancel the MRP
  2. change the db_file_name_convert to point to «F:\»... »
  3. Mount the backup database
  4. start the MRP

  Hope that these steps are clear.

• printer does not print my database files

  All my microsoft works does not print database files, all other files print ok.  When I go to print it tells me to

  go to the control panel and make the default printer, which is.  Note that I had my computer in the shop a few

  Months maybe they screwed up this because I used to print my recipes and now I can't.

  If it were me, I would like to download the patch on http://www.microsoft.com/en-us/download/details.aspx?id=22751 if it's for the wrong version of Works (8.5 instead of 8), do not install.

  But because I'm not an expert on the works and because you describe exactly the problem that the fix is intended to fix (see this article--> http://support.microsoft.com/kb/933828) and because the patch is for Works 8.5 (and you said you have 8), I suggest that you ask a question here, where there is risk to be experts work (or at least people who know more about the work I have)--> http://answers.microsoft.com/en-us/office/forum/officeversion_other-office_other?tab=all&tm=1373467526283

  To speed things up a bit, when you ask your question, please include the link to this thread--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/printer-wont-print-my-database-files/20b19aef-4d3d-4409-a3df-74d02cc03605#_self

  P.S.: What you wrote, you appear not need to download any "service packs".  You have the latest service pack for Windows XP.

• Scipt OpenScript/Bank of data/hand scipt:Second used can not find the database file

  Hi all
  
  I want to palyback a main script containing three "scripts", two of them are the same script. Separately, they all can read successfully.
  For example, in the script 'Hand', there are 'A' 'B' 'A' script ssuccessively. and 'A' 'B' have their own databases respectively under "a data bank / ' and ' B/database /. Each database has two records in the .csv file.
  Now I'm reading 'Hand', the script of the child 'A' can run successfully then child script "B" run correctly too, but the second, run the script "A" says more no record and the main script to stop there.
  
  So, how can I do the 'Hand' performance full script without being stopped by the second script used 'A'?
  Thanks a lot for your help ^ _ ^!
  
  Kind regards
  Angyoung

  Hello

  Mention the database settings in initialize(), IE.

  public void initialize() throws Exception {
  ........
  getDatabank("DBAliasNAme").changeSettings("startindex=1:whenout=STOP_USER");
  .......
  }
  

  Kind regards
  Dembélé M

• Could not open the file of muse: 3125 error cannot open database file

  Muse crashed on me a couple of times last night, I went ahead and installed the new update. Now, I can't open my files of muse and I get the error message "cannot open this file in the Adobe Muse site. Error #3125: could not open the database file. »

  Is it because I've updated? I can open some files in muse, but not those that I really need to work on.

  Hello

  Take a look at this thread: http://forums.adobe.com/message/5041864#5041864

  See you soon
  Parikshit

• Data file not shipped from the primary database to the standby database

  Hello
  
  (1) create a new user
  (2) created a new table space and add datafile on the primary database
  (3) the value tablespace default user
  
  But so far, this new data file is not delivered on the standby database.
  
  Version of database - 10.2.0.3
  OS - Windows
  
  Setting of primary and Standby: -.
  
  SQL > show parameter standby_file_management;
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  standby_file_management string AUTO
  
  Both have the same file system, but the difference is case sensitive.
  
  Primary data file location - D:\testdata
  
  Location of file data at rest - D:\TESTDATA
  
  Help, please.

  MRP process is running on the standby database?

  If it is then try to pass, log on the primary database and share your result.

• My .mdf database file has been corrupted

  My .mdf database file has been corrupted, and I have no way to get my S.i. schema tried with some software available on the internet, but its turns out that each of them being the demo versions give back the repaired file. Are there other ways by which I can restore my db? I use MS SQL 2008

  Hello

  Sorry for the delay in responding to this post.

  The problem is related to .mdf, which is corrupt and you are using MS SQL 2008, ask you to send the query to the following TechNet Forum to get help.

• Set the primary as file not required

  Hello
  
  A form of check-in, there are two fields to transfer a file:
  
  With main file is mandatory.
  Another file with is not mandatory.
  
  Based on the fact that these fields are not in the list of metadata for configuration manager, is it possible to define the scope of primary file as non-mandatory?
  
  This procedure is necessary because sometimes I have to check in the metadata of physical files (paper document) and later, update the content with the digital file (digital text).
  
  Thank you in advance.
  
  Jose.
  
  Published by: José Márcio t. Jr 21/03/2013 06:44

  See here: Re: archiving content without defining a primary/secondary file

• A virus has attacked my computer and erased my MSN database files and when I try to reinstall, my MSN Installer does not work. I was unable to fix it.

  A virus has wiped out my MSN database files and I am unable to remove MSN and work again. I'll have to go through Internet Explorer instead of my MSN account. I want my MSN e-mail account to be relocated instead of having to use Hotmail (which I hate). I get the MSN on the Internet Explorer home page, but it's the only thing I get. I tried to reinstall MSN, but the installer is too corrupted and I don't know how to fix it. Any help would be greatly appreciated! Thank you!

  Hi Ellabelle1,

  To support more specialized on this issue, please contact the MSN Support

  MSN support

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DataGuard passage failed: impossible to failover, primary database is always "PRIM".

  Hi all

  
  

  DataGuard digital switchover is Getting failed with the below error:

  DGMGRL > passage to the "dry";

  Continue to pass, please wait...

  Error: ORA-16664: impossible to receive the result of a database

  Failed.

  Impossible to failover, primary database is always "PRIM".

  Note:it comes to node unique database with physical styandby.

  =====================================================

  In alert log file provides, I am getting below the error during the failover operation:

  Fatal OR connect 12514 error, connect to:

  (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=rac1.localdomain)(PORT=1524)))(CONNECT_DATA=(SERVICE_NAME=PRIM_DGB)(INSTANCE_NAME=PRIM)(CID=(PROGRAM=oracle)(HOST=rac2.localdomain)(USER=oracle)))

  Please suggest to solve this problem.

  Thank you.

  Problem is fixed - value StaticConnectIdentifier checked to a database of primary and standby in dgmgrl ==> primary port and standby was wrong wrt to the listening port value.

  Step 1 > error ORA-16664 and ora-12514

  ==> check StaticConnectIdentifier value for a primary database and a standby in dgmgrl ==> primary port and standby had value default IE 1521

  Primary:

  SEE THE VERBOSE "PRIM" DATABASE

  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1.localdomain) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = PRIM_DGMGRL) (INSTANCE_NAME = PRIM)(SERVER=DEDICATED)))'

  Standby time:

  SEE THE DETAILED "DRY" DATABASE

  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rac2.localdomain) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = SEC_DGMGRL)(INSTANCE_NAME=SEC) (SERVER = DEDICATED)

  Step 2 > listening port for the primary and standby is 1524 and 1525, so change these manually.

  Primary:

  SQL > show parameter local_listener

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  LOCAL_LISTENER chain

  SQL > alter system set local_listener ='(ADRESSE = (PROTOCOL = TCP) (HOST = rac1.localdomain) (PORT = 1524))

  Standby time:

  ALTER system set local_listener = '(ADDRESS = (PROTOCOL = TCP) (HOST = rac2.localdomain) (PORT = 1525))';

  #edit database 'PRIM' set the property StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1.localdomain) (PORT = 1524)) (CONNECT_DATA = (SERVICE_NAME = PRIM_DGMGRL) (INSTANCE_NAME = PRIM)(SERVER=DEDICATED)))'

  #edit database 'DRY' set the property StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rac2.localdomain) (PORT = 1525)) (CONNECT_DATA = (SERVICE_NAME = SEC_DGMGRL)(INSTANCE_NAME=SEC) (SERVER = DEDICATED)))'

• logfile missing watch on the primary database

  In a 11.2.0.4 database, we have configured Data Guard, so they created pending log files, but it has been deleted in ASM + accidentally.

  Thus, research in the database primary, the newspaper observed log pending files, but is not in ASM +.

  In the alert log has not been recorded event.

  I can do the recreation of the eve logfiles?

  What role can have on the primary database?

  Our configuration:

  BECAUSE with 4 cases

  --

  logonline 5 groups for example

  each group of logonline with 2 members

  --

  6 standby of the group e.g.

  each group watches with 2 members

  Total 48 asm file missing

  Select *-Group #, Member

  v $ logfile where type = "STANDBY".

  order by group #.

  GROUP # STATUS TYPE MEMBER IS_RECOVERY_DEST_FILE

  No. 51 +DATA_EXA/prep/onlinelog/group_51.1613.804140169 EVE

  No. 51 +RECO_EXA/prep/onlinelog/group_51.2918.804140175 EVE

  No. 52 +DATA_EXA/prep/onlinelog/group_52.1614.804140479 EVE

  No. 52 +RECO_EXA/prep/onlinelog/group_52.4182.804140485 EVE

  ....

  .....

  74	No. +DATA_EXA/prep/onlinelog/group_74.972.875418965 day BEFORE
  74	No. +RECO_EXA/prep/onlinelog/group_74.14330.875418971 day BEFORE

  ASMCMD >

  ASMCMD > ls-l +DATA_EXA/prep/onlinelog/group_74.972.875418965

  ASMCMD-8002: entry 'group_74.972.875418965' does not exist in the directory ' + prep/DATA_EXA/onlinelog /'

  ASMCMD >

  ASMCMD >

  Redologs Eve will be active when the database is in the role of Eve, so you can drop the watch group redologfile missing for the thread and add it again.

  You have lost all the groups newspaper waiting for redo for all threads?

  On primary, you can drop all odds redolog groups because they will be unassigned State on the standby database make sure the group is unassigned status before falling

  Select Group #, THREAD #, STATUS from v$ standby_log;

• RMAN-06820: WARNING: unable to archive the current log on the primary database

  I got the following exception when I try to backup the data files and the archivelogs on the physical by uisng RMAN standby database.

  RMAN-06820: WARNING: unable to archive the current log on the primary database

  Target ORACLE database error:

  ORA-17629: unable to connect to the remote database server

  ORA-17627: ORA-00942: table or view does not exist

  It's the backup script

  "

  connection target sys/oracle

  Configure controlfile autobackup on;

  Run {}

  nocfau together;

  allocate channel ch01 device type disc format ' / test/%U';

  allocate channel ch02 device type disc format ' / test/%U';

  backup database copy archivelog;

  backup copy current controlfile;

  }

  "

  And there is no error ora in the primary alert log.

  I was able to tnsping two server (primary/secondary) properly and could also primary of the remote login on standby db server and switch logfile. I read there is a very similar thread, but it has failed so I post again and hope I could get a few clues. Thank you.

  Hello again;

  Try to change this:

  connection target sys/oracle

  to something like this:

  RMAN target sys/password@PRIMARY auxiliary.

  Complete example:

  http://www.Visi.com/~mseberg/data_guard/duprman2.html

  Best regards

  mseberg

• Migration of data from the old platform to the new primary database, need advice.

  I have physical standby facility and everything works now.
  
  Next weekend, we will do the actual migration of the old platform to the new environment.
  
  I have several issues of concern.
  
  Migration will go to the primary database. I'll have to remove patterns and inside expdp dmp.
  
  While I do all those, what data base waiting? should I disable it again apply?
  
  What other concerns and precautions I need to take before I have to remove all data from primary school and do a migration?
  
  Thank you in advance.

  Hello;

  My main concern would be the FRA (assuming you use it).

  By doing all that generates a ton of archives, you have to worry about the space on both sides.

  I would consider increasing my FRA on both sides.

  I would not disable the recovery, but I look very close and be willing to adjust my space as needed.

  As long as you don't miss space you should be fine. I had once a backup log files more than 250, and it took about 15 minutes to catch up.

  Have a little prepared scripts in advance if you can increase the space or delete archive applied and it should be fine.

  I also opened at least two terminals on the primary and Standby. Everyone look at space and the other to execute all what you need to adjust the space.

  The rest is common sense, first do the smaller drawing if you have an idea what to expect. Decaying etc. as much as possible.

  Best regards

  mseberg

  I have a shell script called 'quickcheck.sh' (use a separate but .env file it will send information vital back)

  With a little work, you can do this in something that makes it easy to keep an eye on things.

  #!/bin/bash
  ####################################################################
  #
  
  if [ "$1" ]
  then DBNAME=$1
  else
  echo "basename $0 : Syntax error : use . quickcheck  "
  exit 1
  fi
  
  #
  # Set the Environmental variable for the instance
  #
  . /u01/app/oracle/dba_tool/env/${DBNAME}.env
  #
  #
  
  $ORACLE_HOME/bin/sqlplus /nolog <
  

  and then a SQL file called quickaudit:

  SPOOL OFF
  CLEAR SCREEN
  SPOOL /tmp/quickaudit.lst
  
  --SELECT SYSDATE FROM DUAL;
  --SHOW USER
  
  PROMPT
  PROMPT -----------------------------------------------------------------------|
  PROMPT
  
  SET TERMOUT ON
  SET VERIFY OFF
  SET FEEDBACK ON
  
  PROMPT
  PROMPT Checking database name and archive mode
  PROMPT
  
  column NAME format A9
  column LOG_MODE format A12
  
  SELECT NAME,CREATED, LOG_MODE FROM V$DATABASE;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking free space in tablespaces
  PROMPT
  
  column tablespace_name format a30
  
  SELECT tablespace_name ,sum(bytes)/1024/1024 "MB Free" FROM dba_free_space WHERE
  tablespace_name <>'TEMP' GROUP BY tablespace_name;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking freespace by tablespace
  PROMPT
  
  column dummy noprint
  column  pct_used format 999.9       heading "%|Used"
  column  name    format a16      heading "Tablespace Name"
  column  bytes   format 9,999,999,999,999    heading "Total Bytes"
  column  used    format 99,999,999,999   heading "Used"
  column  free    format 999,999,999,999  heading "Free"
  break   on report
  compute sum of bytes on report
  compute sum of free on report
  compute sum of used on report
  
  set linesize 132
  set termout off
  select a.tablespace_name                                              name,
         b.tablespace_name                                              dummy,
         sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id )      bytes,
         sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id ) -
         sum(a.bytes)/count( distinct b.file_id )              used,
         sum(a.bytes)/count( distinct b.file_id )                       free,
         100 * ( (sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id )) -
                 (sum(a.bytes)/count( distinct b.file_id ) )) /
         (sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id )) pct_used
  from sys.dba_free_space a, sys.dba_data_files b
  where a.tablespace_name = b.tablespace_name
  group by a.tablespace_name, b.tablespace_name;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking Size and usage in GB of Flash Recovery Area
  PROMPT
  
  SELECT
    ROUND((A.SPACE_LIMIT / 1024 / 1024 / 1024), 2) AS FLASH_IN_GB,
    ROUND((A.SPACE_USED / 1024 / 1024 / 1024), 2) AS FLASH_USED_IN_GB,
    ROUND((A.SPACE_RECLAIMABLE / 1024 / 1024 / 1024), 2) AS FLASH_RECLAIMABLE_GB,
    SUM(B.PERCENT_SPACE_USED)  AS PERCENT_OF_SPACE_USED
  FROM
    V$RECOVERY_FILE_DEST A,
    V$FLASH_RECOVERY_AREA_USAGE B
  GROUP BY
    SPACE_LIMIT,
    SPACE_USED ,
    SPACE_RECLAIMABLE ;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking free space In Flash Recovery Area
  PROMPT
  
  column FILE_TYPE format a20
  
  select * from v$flash_recovery_area_usage;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking last sequence in v$archived_log
  PROMPT
  
  clear screen
  set linesize 100
  
  column STANDBY format a20
  column applied format a10
  
  --select max(sequence#), applied from v$archived_log where applied = 'YES' group by applied;
  
  SELECT  name as STANDBY, SEQUENCE#, applied, completion_time from v$archived_log WHERE  DEST_ID = 2 AND NEXT_TIME > SYSDATE -1;
  
  prompt
  prompt----------------Last log on Primary--------------------------------------|
  prompt
  
  select max(sequence#) from v$archived_log where NEXT_TIME > sysdate -1;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking switchover status
  PROMPT
  
  select switchover_status from v$database;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  SPOOL OFF
  
  exit
  

  The env file looks like this: (if the file would be PRIMARY.env)

  ORACLE_BASE=/u01/app/oracle
  
  ULIMIT=unlimited
  
  ORACLE_SID=PRIMARY
  
  ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
  
  ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
  
  LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
  
  LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
  
  LIBPATH=$LD_LIBRARY_PATH:/usr/lib
  
  TNS_ADMIN=$ORACLE_HOME/network/admin
  
  PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
  
  export EXP_DIR=/u01/oradata/PRIMARY_export
  
  export TERM=vt100
  
  export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
  
  export ORACLE_HOME
  
  export LIBPATH LD_LIBRARY_PATH ORA_NLS33
  
  export TNS_ADMIN
  
  export PATH
  

  Published by: mseberg on December 9, 2011 18:19

• Delete pending roll forward primary database journal

  Hi all
  
  I'm trying to drop the standby logfiles on the primary database (database that I am setting the DG).
  Members of the groups of newspaper pending exists on the file system.
  Someone has deleted these files. His old configuration where the files are in the file system. They are now in ASM.
  When I try to delete the logs on hold I got the following error:
  

  SQL> alter database clear logfile group 7;
  alter database clear logfile group 7
  *
  ERROR at line 1:
  ORA-19528: redo logs being cleared may need access to files

  SQL> select * from v$logfile order by 1;
  
      GROUP# STATUS  TYPE    MEMBER                                                                           IS_
  ---------- ------- ------- -------------------------------------------------------------------------------- ---
           1         ONLINE  +REDO1/proj/onlinelog/group_1.256.340558657                                     NO
           1         ONLINE  +REDO2/proj/onlinelog/group_1.256.340558659                                     NO
           2         ONLINE  +REDO1/proj/onlinelog/group_2.257.340558879                                     NO
           2         ONLINE  +REDO2/proj/onlinelog/group_2.259.340558879                                     NO
           3         ONLINE  +REDO1/proj/onlinelog/group_3.258.340558707                                     NO
           3         ONLINE  +REDO2/proj/onlinelog/group_3.257.340558709                                     NO
           4         ONLINE  +REDO2/proj/onlinelog/group_4.258.340558713                                     NO
           4         ONLINE  +REDO1/proj/onlinelog/group_4.259.340558711                                     NO
           5         ONLINE  +REDO2/proj/onlinelog/group_5.260.340558965                                     NO
           5         ONLINE  +REDO1/proj/onlinelog/group_5.260.340558963                                     NO
           6         ONLINE  +REDO1/proj/onlinelog/group_6.261.340558967                                     NO
           6         ONLINE  +REDO2/proj/onlinelog/group_6.261.340558967                                     NO
           7         STANDBY /oracle/proj/onlinelog2/redo_702.log                                            NO
           7         STANDBY /oracle/proj/onlinelog1/redo_701.log                                            NO
           8         STANDBY /oracle/proj/onlinelog2/redo_802.log                                            NO
           8         STANDBY /oracle/proj/onlinelog1/redo_801.log                                            NO
           9         STANDBY /oracle/proj/onlinelog2/redo_902.log                                            NO
           9         STANDBY /oracle/proj/onlinelog1/redo_901.log                                            NO
          10         STANDBY /oracle/proj/onlinelog1/redo_1001.log                                           NO
          10         STANDBY /oracle/proj/onlinelog2/redo_1002.log                                           NO
  
  20 rows selected.
  
  SQL> select * from v$standby_log order by 1;
  
      GROUP# DBID            THREAD#  SEQUENCE#      BYTES       USED ARC STATUS     FIRST_CHANGE# FIRST_TIM LAST_CHANGE# LAST_TIME
  ---------- ------------ ---------- ---------- ---------- ---------- --- ---------- ------------- --------- ------------ ---------
           7 UNASSIGNED            0          0  104854601        512 YES UNASSIGNED             0                      0
           8 UNASSIGNED            0          0  104854601        512 YES UNASSIGNED             0                      0
           9 UNASSIGNED            0          0  104854601        512 YES UNASSIGNED             0                      0
          10 UNASSIGNED            0          0  104854601        512 YES UNASSIGNED             0                      0

  What can I do to make it give up these reference?
  Any other solution instead of modify the controlfile and stop/start the database?
  
  Thank you!!!

  Hello;

  Think that Oracle, the files are there, but I still have a bug on metalink where the controlfile had them again, but they were not on the file system. Can you confirm that they exist?

  Meanwhile, I'm checking my notes for the Oracle number of doc.

  Bug 6128242: TRY TO drop the STANDBY LOG FAILED WITH ORA-19528

  So if you're Oracle 10, this could be the problem.

  workaround is to re-create the controlfile without the incorrect log file. (Ugh!)

  ORA-01156 when adding or deleting Redo Logs [ID 452152.1]

  Best regards

  mseberg

  Published by: mseberg on October 31, 2011 17:09

• Change the database file [DFL]

  Hello

  I'm looking for a way that may alter the *.ldf database file, some customers do not put the Signal_endcoding_types in the FLA file. I need a way to save the 'coding' in the file with labview UI. I found a few old FLA file API, but I tried, it seems to me that they only works on older versions. My fla file version is LIN_protocol_version = "2.0"; LIN_language_version = "2.1"; could someone tell me if there is a way that can achieve my goal.

  Thanks in advance

  Best regards

  Melo

  You want to edit the FLA file?  Because if so there is nothing that neither currently offers that will work for you.  If you want to use the FDL in XNet and you want to change the settings imported from the FLA so you can use the XNet API to achieve this.  When you use XNet you import the FLA (or other database files) and then you can modify the database, but is not edit the FLA.  This changes the database using the XNet, which began with the importation of the DFL.

  Recently, there has been updates of XNet which allow you to export a database, but I think they don't support that export to a database BOX.  So with CAN you can import a DBC XNet, change it using the database, editing tools, and then export it to a DBC should have the changes you made.