myRIO install error TARGETDIR is undefined table incorrect directory

Similar Questions

• Saving energy re - install error of setting on Portege S100

  I'm trying to re - install the utility Power Saver on my Portege S100 (after its removal via Control Panel |) Remove Programs).

  I downloaded the version of WinXP S100 of Power Saver and unpacked. When I run the setup.exe, I get a stop error message "the parameter is incorrect." There is no apparent documentation with the download say what parameter is required etc.

  Has anyone seen this before or you have a suggestion on how to re - install Power Saver successfully.

  Thank you.

  Hello

  Please note that all of the Toshiba Utilities must be installed in the correct order!
  Please see on the page of the driver installation instructions!

  The common modules must be installed first before other tools and utilities will be installed
  There is also the hardware configuration and Power Saver tool. This utility should be used for the BIOS ver1.30 or above.

  Concerning

• code error 80070057 the parameter is incorrect

  Hello

  I have a server with Windows server 2003. I have a problem when I try to add a new user role in a portal Application COM + system applications displays the following message:

  An error caused while processing the last operation:

  error 80070057 the parameter is incorrect.

  System has been installed to update security for windows server 2003 recently. Is it possible to fix it, or maybe I need to uninstall the security updates?

  Thanks in advance,

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Vista SP2 x 64 install error "0xc0190036 517/97646 (explorer.exe)" _

  I'm trying the upgrade of vista x 64 sp1 to vista sp2 x 64. When the system tries to restart, it crashes with the error "0xc0190036 517/97646 (explorer.exe). I have to hard start and do a restore.
  I tried several suggestions over a period of 3 days. One of the suggestions was to run chkdsk.  This is the error I get when I run chkdsk: "explorer.exe entry index in the index file 35 $I30 are incorrect."  If I run chkdsk /f it says it removes the entry and then explorer.exe is an orphan.  When I reboot and running chkdsk /f even once, I get the same messages.
  Is the vista sp2 x 64 install error and the error from chkdsk associated.  What should I do?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009 (i.e. less than 2 weeks). Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to update I get files no long registered or installed error message. I click on register or update for me. said was both 100% try again & get the same

  I can't update I get is more rgisteed or installed error message. When I try to fixit I get error report faild to install components. I can't get scurity essentials to install. What should I do to fix this

  Hello

  I suggest try to reset the Windows Update components, follow these steps:

  1. Open a Windows command prompt window. To open a command prompt, click Start , and then click run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER:

     cmd

  2. Stop the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net stop bits
     • net stop wuauserv
  3. Delete the qmgr*.dat files. To do this, type the following command at a command prompt and press ENTER:
     Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat.
  4. If this is your first attempt to troubleshoot Windows Update by following the steps in this article, go to step 5 no proceed to step 4. Step 4 should be done only at the time the Troubleshooting If you cannot resolve your Windows Update problems after following all the steps but step 4. The steps in step 4 are also carried out by the "aggressive" mode of the fix it Solution above:
     1. Rename the following files to *. BAK:
        • %SystemRoot%\SoftwareDistribution\DataStore
        • %SystemRoot%\SoftwareDistribution\Download
        • %Systemroot%\System32\Catroot2

        To do this, type the following commands at a command prompt. Press ENTER after you type each command.

  • Ren %systemroot%\SoftwareDistribution\DataStore master
  • Ren %systemroot%\SoftwareDistribution\Download master
  • Ren %systemroot%\system32\catroot2 master
• Reset the BITS service and the Windows Update service for the default security descriptor. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • SC.exe tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  • SC.exe tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
• Type the following command at a command prompt and press ENTER:
  CD /d %windir%\system32
• Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • Regsvr32.exe atl.dll
  • Regsvr32.exe urlmon.dll
  • Regsvr32.exe mshtml.dll
  • Regsvr32.exe shdocvw.dll
  • Regsvr32.exe browseui.dll
  • Regsvr32.exe jscript.dll
  • Regsvr32.exe vbscript.dll
  • Regsvr32.exe scrrun.dll
  • Regsvr32.exe msxml.dll
  • Regsvr32.exe msxml3.dll
  • Regsvr32.exe msxml6.dll
  • Regsvr32.exe actxprxy.dll
  • Regsvr32.exe softpub.dll
  • Regsvr32.exe wintrust.dll
  • Regsvr32.exe dssenh.dll
  • Regsvr32.exe rsaenh.dll
  • Regsvr32.exe gpkcsp.dll
  • Regsvr32.exe sccbase.dll
  • Regsvr32.exe slbcsp.dll
  • Regsvr32.exe cryptdlg.dll
  • Regsvr32.exe oleaut32.dll
  • Regsvr32.exe ole32.dll
  • Regsvr32.exe shell32.dll
  • Regsvr32.exe initpki.dll
  • Regsvr32.exe c:\windows\system32\wuapi.dll
  • Regsvr32.exe c:\windows\system32\wuaueng.dll
  • Regsvr32.exe wuaueng1.dll
  • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
  • Regsvr32.exe c:\windows\system32\wups.dll
  • Regsvr32.exe wups2.dll
  • Regsvr32.exe wuweb.dll
  • Regsvr32.exe qmgr.dll
  • Regsvr32.exe qmgrprxy.dll
  • Regsvr32.exe c:\windows\system32\wucltux.dll
  • Regsvr32.exe c:\windows\system32\muweb.dll
  • Regsvr32.exe c:\windows\system32\wuwebv.dll
• Reset Winsock
. To do this, type the following command at a command prompt and press ENTER:
netsh winsock reset
• If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
  Proxycfg.exe d
• Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • net start bits
  • net start wuauserv
• If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
  Bitsadmin.exe/Reset /allusers
• Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
  949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
• Restart the computer.

WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows

Hope the information is useful.

• Error code; The parameter is Incorrect

  My operating system is "Windows XP Home." I tried to print a multitude of photos using the "Photo Print Wizard." When I click the link icon in the "picture and Fax Viewer", I get the error code; The parameter is Incorrect. The wizard does not open. I noticed that the icon in the 'Control Panel' folder has changed and the name is 'File' rather than 'printers and faxes '. I made every effort to change, including to remove and reinstall my printer but nothing helped. I can't delete the file or find the root of this folder in 'windows '. It seemed to me that the path of the file has been changed due to a change of name of this file in the path. However, I can still use a printer installed by other software to print. By the way, when I reinstall any printer, I do not see the printer in this file but it always says 'File' in the 'control panel '. The shimgvw.dll file is registered correctly as I can tell. If I try to launch 'Photo and Print Wizard' from the link on the left in the "Control Panel" itself, I just get a beep for error but no error code. The wizard does not start. This wizard is a very important tool to print multiple selections at once. I havn't used in awhile, so I don't know when it is first of all changed. Any thoughts?, anyone? Is there another install name of the package in the wizard to reinstall it from Microsoft?

  THIS WILL SOLVE THE PROBLEM

  1. Click Start> run type REGSVR32 photowiz.dll click OK

  NOTE: leave a space between the two.

  FACT!

  This will re - save the "TheAssistant printing photographs"and it will work from the folder 'My pictures'.

  * However, this does not resolve the question "renaming" of the file folder in the 'Control Panel', 'printers and faxes '.   That remains a mystery, I hope I can solve.

  2. If you are unsure if you have this module, DO a SEARCH using the search tool in the "Start Menu".

  3. If the search shows nothing in the directory... (drive letter) \Windows\System32, and then search the directory(drive letter)\WINDOWS\ServicePackFiles\i386, Scroll to module; photowiz.dll and 'Copy and paste' to your windows folder directory as described above. Depends on your drive letter on which you originally installed "Windows XP". It is usually a letter'C'.

  5. If you had to 'Copy and paste' this module in your operating system folder. Then, you must re-register the above method module.

  Thank you, GARTH

   

• Fatal error: call to undefined method tNG_fields::tNG_fields() - after reappattage WAMP

  Hello

  Recently I had to replace my computer with a new one. Always running on XP, I got the old primary HDD as secondary in the new. MEASURE with WAMP worked very well in the earlier version of the system where as with the variation on I entered a series of questions.

  Here are the details of the version:

  The old Wamp version details:
  Wamp2.0
  phpMyAdmin2.11.6
  apache2.2.8
  PHP5.2.6
  
  A new:
  Wamp2.0
  phpmyadmin3.2.0.1
  Apache2.2.11
  PHP5.3.0

  MEASURE - 1.0.1.

  Now all my previous MEASURE used files as well as the new shows the error:

  Fatal error: Call to undefined method tNG_fields::tNG_fields() in C:\wamp\www\quote\includes\tng\tNG_insert.class.php on line 30

  I checked the configuration of PHP and extensions in comparison to the former. They seems to be okay.

  No idea what caused this chaos?

  Thank you

  Jay

  I had exactly the same problem, has nothing to do with your appz that have to do with the new version of php 5.3, I did a test where I have installed two versions of php 5.3 and 5.2.9 when I switched to 5.2.9 it worked as soon I went to 5.3 I got the error, what looks like uninstall is not compatiable with 5.3 or more.

• Cannot download Fallensword Helper Scripts. Get ' Script cannot be installed error: failed @require json2.js.

  Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install the scripts said "Script cannot be installed error: failed @require json2.js. I did it for my computer every year since I started to use computers. I've never had this before. Please help me to get a fix for this, because I google it and cannot find an answer.

  I am the original author of FallenSwordHelper. It was due to some changes in GreaseMonkey 0.9.0, which made it impossible to have local scripts.

  I did an update (temporary?) so that extra all scripts (such as json2.js) now use absolute URLS.

  See also the official website of FSH

• receive the following error code when searching for a piece of music I did several times without a music problem but have recently updated Firefax: Fatal error: Call to undefined function AmazonData() in/home/boss/public_html/mc on line 13

  I am in the page web http://www.songarea.com/ and after searching a piece of music, I get the following error message:
  "Fatal error: Call to undefined function AmazonData() in/home/boss/public_html/mc on line 13.
  I did this several times before without a problem, but have recently updated Firefox with the Skype add-on and wonder if the two things are related.

  URL of affected sites

  http://www.songarea.com/

  Hi John,.

  It is an error message from the web server providing this site. Specifically, it is something wrong with their PHP code.

  It is not browser specific and would go into another browser besides Firefox.

  You will need to contact the webmaster of this site to report this problem. A quick test does not show this problem, but you do not specify what search query, you tried:

  http://www.songarea.com/music-codes/test.html

• Can't access iscsi with ' error in the evaluation table display iscsilist IndexSizeError:

  I have been using my readyNAS years and today, after having extended a target (in volume), I can't access the Volumes-> iSCSI tab anymore.

  SOS!

  I really need.

  The error I get in FF:

  "Error in the evaluation table display iscsilist IndexSizeError: Index or size is negative or greater than the quantity allowed.

  It's a bit different in Chrome, but it won't let me copy it.

  Error in the evaluation table display iscsilist IndexSizeError: cannot set property 'maxLength' on "HTMLInputElement": the provided value is (-1) is negative.

  Any suggestions please?

  Thank you!

  It was super useful:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/ReadyNAS-2100-error-encountered-uploading-updat...

  I downloaded the update of intermediate as a file and updated firmware to update.

  And now I can access the iscsi again tab.

  MDGM, thanks a lot!

  I'm a happier person now!

• a Lexmark 7600 Series printer will not print - cant install error 0x000003eb

  I can't print with my wireless lexmark 7600 printer, we have changed the ink cartridges, which is what I thought the problem was and I bought lexmark ink cartridges. I have now uninstalled the printer and installed it again, in the end, it gives an error message saying it can't install error 0x000003eb.   She completed the page alignment ok, we know what to do next, or what may be wrong, I followed all the advice of troubleshooting without result!

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. that all troubleshooting have you tried?

  Method 1:

  If you are using windows vista, I suggest you to follow the links and check out them.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2:

  I also suggest you to contact the manufacture of your printer and check.

  http://support.Lexmark.com/index?channel=supportAndDownloads&page=home&locale=en&UserLocale=en_US

• newly installed windows xp home updates are not installing. error 0 * 80240036 & 0 * 80244019 make their appearance, help to solve.

  Dear Sir/Madam,

  I installed MS XP HOME in my PC, but the updates are not installing. error 0 * 80240036 & 0 * 80244019 make their appearance, help to solve.

  Kind regards

  Joseph

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/new-install-Windows-XP-Home-cant-get-updates-i-get/bbfa786f-40B2-4419-85DD-ba718b674716

  Look at the tricky300 post in this thread.

• Service Pack 3 won't install, error Code Ox87FFO54F

  Service Pack 3 is not installed

  Thanks for the effort, but I have now tried several times after defragmentation and registry cleaner - always also translates impossible to install - error.

  Given that my knowledge is limited, I have now decided to take my computer to a local agency to try to solve the problem, but I thank you for your suggestions.

  R Bee Walker

• When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."

  access denied for the creation of a directory

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  Only when you try to install this application?

  What about BullZIP PDF Printer?

  (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)

• Security KB2656307 & KB 2656353 update fails to install error Code 0 x 643

  22/04/12 the site Windows Update sent back message «...» Microsoft could not complete installation a security update for Microsoft NET Framework 1.1 to the release of Windows XP message "some updates were not installed" error Code: 0 x 643

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982