myRIO Servo demo does not: Servo sweeps back

Similar Questions

• I uninstalled Microsoft Word by mistake yesterday. System Restore does not bring this back. Any suggestions?

  I uninstalled Microsoft Word by mistake yesterday.  System Restore does not bring this back.  Any suggestions?

  You need to reinstall it from your original installation media or file that you have saved and saved.

• Why BrowserField demo does not use BrowserField?

  I had some problems getting the BrowserField object to display all images on a page. When you search the formus, it was suggested to use the BrowserFieldDemo included in JDE for example. I tried and it works, but the back button does not work and you can not click on one of the links. Then I discovered that it does not actually use a BrowserField object as in

  net.rim.device.api.browser.field2.BrowserField
  

  Does anyone know how to make the browserField to work... WITH a functional back button and no image broken?

  I'd appreciate all point in the right direction.

  In fact, I realized that BrowserField demo uses OS 4.0 components while the BrowserField object is only OS 5.

• G3_710 - my pc does not load same BACK now :(

  I had just installed Ubuntu Studio (alongside Windows 10). Then after you saw that he start directly on Windows, I rebooted with a USB key with startup repair. After choosing the USB to boot from, he proceeded to attempt that, but he was never a black screen. I waited 10 minutes.
  Then I forced shut down, removed the USB key and turned back on it. But does nothing, not even loading BACK. I never had a single case this bad
  What now?
  Data sheet:
  Acer Predator G3-710

  Thanks in advance guys.

  JDL

  The solution was to:
  do a cold boot or total power off. If you also remove the laptop battery. And hold the power switch for about 10 seconds to remove all left on power. Next time you start it will be ok.

  Thanks to these two, oldfred forums Ubuntu and Allan, a good friend.

• Captivate demo does not appear

  I use TC 3.5, have a machine with 8 GB RAM, large hard drive, fast processor.  I am using Captivate to record in demonstration mode at 1024 x 768.  I went out to the swf format.

  I followed the instructions of RoboHelp to the letter but still get this problem: the Captivate demo appears not in my CHM, except when you click on the view button result after compilation. He also appears in the overview of the topic ("Item selected View").

  It does not appear when you double-click the CHM file in a folder.  What watch is a sketch where the demo should be, with a red X in a box in the upper left corner.

  He will appear in WebHelp.  The code in the CHM seems OK for me:

  < body >

  < p > < object id = "Object1" data = "captivate_demo.swf" type = "application/x-shockwave-flash" "

  style = "" border: none; "width = '1445' height = '950' >"

  < param name = "movie" value = "captivate_demo.swf" >

  < param name = "quality" value = "high" >

  < / object > < / p >

  < / body >

  I have the last update (from 10 minutes ago) running Flash.

  Ideas?

  Jack DeLand says:

  No work around at all?

  You mean in addition to claiming that people only use the CHM on 32-bit systems or offering instructions on how to launch the 32-bit help viewer?

  I don't think you can use the shortcut command to open an instance of Internet Explorer with the Captivate page. But should ensure the Captivate SWF and associated files (HTML, JS) have delivered and installed in the same folder as the CHM file. And depending on how your CHM has been launched, you might need the path to the script file because of the bug of Multipathing CHM see you when a CHM is initiated by an application.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• HP Officejet Pro 8620:8620 does not print 2 back to back printing

  I have this printer a little over a year.  I have had IT connected wireless and has problems where the printer would show a message "not connected".  Then I hard wired the printer on my MAC and everything was great - worked well.

  Last week when I send 1 print job to the printer without problems.  If I send 2 different print jobs print one and then the 2nd shows "printer not responding do not.  If I break the 2nd print job and wait for say 10 minutes and start it again it prints.

  It's very frustrating because you cannot print more than 1 post at the same time.  Help!

  Hi @tlerayand welcome to the Forums of HP!

  I'd love to help you print several documents again. I understand that you were able to print several documents previously and that this issue has recently. Although I'm not sure what precisely caused the problem, I have some ideas on what we can try to start. Please follow the steps below and let me know the results of your efforts.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• go back does not work

  By clicking on the back arrow does not take me back to the previous screen, instead the screen remains current.

  Seems the visited state if you open links in a new tab with a middle click with the mouse wheel?

• my calendar does not show the events back - but they are on my Macbook Pro

  My iPhone calendar does not display the back events before the current month - they are deleted or hidden? - but they still exist on my MacBook Pro.  How can I restore the history in the iPhone calendar?

  Try the settings > Mail, contacts, calendars > calendars > synchronization > all events - on the phone.

• After upgrading to Firefox 10; hompeage won't load, does not, the bookmarks bar does not return button

  After upgrade my mac to Firefox 10 my home page does not load, the back button does not work, there is no history in the URL bar (or any Demo URL come at all than), bookmarks bar does not display unless I press CTRL and right-click, none of my favorites display the connection information stored... Help! its driving me crazy!

  I just sort this problem! I restarted with modules disabled and started allowing one by one and found it had a problem with one of them. I have now deleted add it on and all is well back. Hope this works for you too!

• Safari, stop suddenly and does not reopen

  I use McAir with OSX Version 10.9.5.  Safari has been upgrade 9.0.2 since 31 dec/15.   A few days ago, when I opened my computer from sleep mode, I saw an error message advising me that an error has occurred and Safari stops unexpectedly.  Since then, whenever I tried to reopen Safari, a problem report presents and reopen my attempts have failed.  I don't have another internet browser on my MacAir.  How can I solve this problem?

  1 remove the covers

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari

  The com.apple.Safari file right-click and select "move to the trash.

  Shut down windows and restart Safari.

  2 remove the test and com.apple.Safari.plist file.

  Empty the trash.

  Quit all applications.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Preferences > com.apple.Safari.plist

  Right-click on it and select "place it in the trash.

  Turn it back on.    Restart Safari.

  If this does not help, "put back" the com.apple.Safari.plist

  Right click on the trash icon in the Dock, then select 'open '.

  Right-click on the com.apple.Safari.plist and select 'Put Back'.

  3. https://support.apple.com/en-us/HT203353

• Safari does not load Pages

  For the last two months I had a problem with Safari not loading pages when I try to go from one place to another.  It will be not also load photos in Facebook and several times in different orders in Facebook don't is not loading.  I finally got fed up with it and switch to Google Chrome, that works perfectly.  Don't know what's going on with Apple these days, but you would think a large progressive company as it could keep their web browser works :-(

  If someone else has had this problem and is there a solution?

  I use Safari 9.0.2 and OSX 10.9.5 on Intel Core i7 3.4 GHz

  Go step by step and test.

  1. Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  2 remove the covers

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari

  The com.apple.Safari file right-click and select "move to trash".

  3. Delete Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  4 remove the test and com.apple.Safari.plist file.

  Empty the trash.

  Quit all applications.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Preferences > com.apple.Safari.plist

  Right-click on it and select "place it in the trash.

  Turn it back on.    Restart Safari.

  If this does not help, "put back" the com.apple.Safari.plist

  Right click on the trash icon in the Dock, then select 'open '.

  Right-click on the com.apple.Safari.plist and select 'Put Back'.

• HP Photosmart C6380 all-in-one intermittently print job does not print

  My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer.  I can see the print job listed in the queue, but it fails to print.  I might have to send the job once again, twice or 3 times before it will finally print.

  Try to stop and start the print spooler. I will include the instructions below.

  1. click on the start menu.
  2. in the search box, type services.msc and press enter on the keyboard.
  3 scroll to find print spooler.
  4. Select the print spooler in the list.
  5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
  6. now it say start. Click Start.
  7. close the window.

  If this does not work, try to bypass the print spooler. I will include the instructions below.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. make sure that "Print directly to the printer" is checked.
  7. click on apply to save the changes.
  8. click OK to close the window.

  If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.

  http://goo.GL/zCk2r

• War does not work

  problem with Windows 7 compatibility

  I have a copy of the war and it does not work on windows 7 Home Edition. Ive tried connecting and using compatibility mode and the resolution of problems and nothing does. The demo does not work and gives me the same problem. What can I do to fix this?

  If you have tried to run in compatibility mode, you probably won't be able to play these games. I'm sorry.

• Windows does not keep appearing

  Everything takes forever to appear, and then crashes (Explorer does more or windows does not) keeps coming back.  It happens on any site that I'm on also on hotmail.  I downloaded the latest windows updates and do a virus check (I have Norton 360) but nothing seems to make any difference. Can someone advise please because I'm not very good with any technical problems.  I looked at how to solve windows problems, but they all do a scan and then want to remove money problems! Thank you

  Everything takes forever to appear, and then crashes (Explorer does more or windows does not) keeps coming back.  It happens on any site that I'm on also on hotmail.  I downloaded the latest windows updates and do a virus check (I have Norton 360) but nothing seems to make any difference. Can someone advise please because I'm not very good with any technical problems.  I looked at how to solve windows problems, but they all do a scan and then want to remove money problems! Thank you

  Hello

  First of all, make sure that your system is clean:

  using the analysis

  http://www.Malwarebytes.org/ (recommended)

  If you have anti antivirus program update it and run full scan or if you do not get this one:
  AVG Free http://www.avg.com/gb-en/download-free-anti-virus

  Note that anti virus as Noroton and Mcafee tend to slow down your pc at startup and to work with your pc so if other steps has not helped your case, consider switching to other anti virus.

  Do using the analysis:

  http://www.emsisoft.com/en/software/EEK/ recommended

  You can run it from memory stick too.

  "It is recommended to perform all analysis in safe mode.

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

  Try to clean boot to see which program is causing your pc run slow or unresponsive

  Statement here:

  http://support.Microsoft.com/kb/310353

  Basically, it must disable all startup items and services of NONE-Windows through msconfig, and then restart your pc and then put it in standby or idle mode and see if the problem is resolved?

  Try to run less program in your startup, minimize your startup program. You can do this either by using the msconfig tool / ccleaner.

  Make sure you drive for errors. Perform disk clean up and Defrag using windows tools.

  Test your windows files

  http://support.Microsoft.com/kb/929833

  Uninstall programs you do not use!

  Please visit my blog for more tips and tricks
  http://safewordwidewebsurfing.blogspot.co.UK/