N5110 display not working, but when the external monitor is connected to come

Similar Questions

• Compaq presario cq42 screen becomes black when the external monitor is unplugged

  Compaq presario cq42-137tu running windows 7 32 bit.

  I've been using a connected external display on the vga port and now every time I disconnect the monitor and restart the laptop the laptop LCD screen will display the original message of compaq and the black windows boot screen with the logo but then turns off. If I reconnect the extrnal monitor it will work fine (even if the external monitor is turned off)

  The screen of the laptop works fine without the external monitor connected in safe mode.

  I used both the HP support and the setting in the display panel to select single monitor and set the display on the screen of the laptop, but every time that the external monitor is not connected the screen turns off. The external screen does not need to be turned on, just to connect to the laptop monitor work. I also tried to download the graphics driver and put it back.

  If your laptop is a ComPaq base model then there is the (built-in) Intel UMA / GMA 4500 M - GL40 chipset with video memory sharing and you should consider downloading and installing the driver Intel graphics high definition (HD).

• Aero off when the external monitor is turned by Nvidia ControlPanel

  Please see subject
  Aero works perfectly when the office is developed for the 2nd monitor in normal mode.
  no work around?

  Post edited by: mhoffmann

  Sorry, I forgot to mention my hw: Satellite a100-02 b (geforce go 7600)

  .. and when I reboot Vista behaves a little bit strange.
  a few seconds, everything looks ok, but then it redefines the external monitor to 16-bit color and minimum Vfrequency (60 HZ)
  and a message appears that the 'Desktop Manager' was closed due to a problem.

  Maybe it's because...
  (1) it is an old CRT, not especially known (standard pnp driver)?
  (2) the ability of the graphics card vista is not sufficient in this configuration?

  I heard somewhere that there is a switch in the registry, which disables the dwm.exe test, if the material is
  able to support the aero technologies. What is a way to fix it?

  Hello

  I read about the registry hack that allows the function Aero Vista on graphics cards that are generally not able to manage the Aero feature.
  But I don t think that the modified registry key might help with this problem!

  In any case, I try to understand what you were doing on the laptop
  You have turned on the display on the second external monitor, then you have changed the position of the screen (you turn the display) and you tried to use the Aero on the external monitor.
  Am I wrong?

  Well, what to say, it s not easy to say if she s a problem or just a limitation of Vista Aero.
  I have never tested or used Aero after the display has been set at another position.

  I think you should test Aero on external monitor without rotation.
  Please also see this Toshiba knowledge base article on

  What are the requirements of Aero in Windows Vista?
  http://support.toshiba-tro.de/KB0/TSB7101O90002R01.htm

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• BlackBerry smartphone App world works, but when the applications are downloaded they do not work... Help!

  Hi I have a blackberry curve.

  My balckberry app world works perfectly find allows me to download anything works very well. But BBM and facebook apps don't work or any other app that I download does not work. Please help me I need my bbm for businesses and personal uses. Thank you

  Hi and welcome to the Forums!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should talk to your provider of official support and to ensure that you are subscribed to a data plan which is sufficient to enable the services you want:

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• Lightroom 6.5 - tethering still not work, but with the Nikon D7000/D7100 - when will it work?

  Hello

  cant believe it - since 5 upgrades from Lightroom 6 the tethering function did not work.

  In the list of supported devices are listed the two camera?

  A list of cameras that can be attached to Lightroom.

  When the modem function work?

  Greetings

  Thomas

  Hi Thomas,

  Please follow the steps mentioned in the article trouble shooting tethered in Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• Equium A100: Nothing on the internal display, but on the external monitor

  For some reason, my laptop has forgotten that he has a screen attached to it.
  I can see everything if I attach an external monitor, but there is nothing on my LCD screen, even if it is on and lit. It is only black.

  I tried to update the display drivers and even the BIOS, but neither one of those who helped.

  And it's not my screen brightness, either - which does not at all. It's as if my screen has just been removed from the system. Help, please!

  Are you sure that the display is not faulty? As far as I know if your laptop is not connected to the external display the home screen Toshiba must be indicated on the screen of the laptop.

  Start the laptop without external screen and wait a few minutes. If you think that the operating system is running correctly, try to use the combination of keys FN + F5 several times to see if you get the image on the screen of the laptop.

• directional button does not work, but all the others are there other keys on my laptop that I can use?

  My 'high touch' directional arrow key does not work.  The arrows down and side are.  I spilled some coffee on my keyboard yesterday and it's the only thing that doesn't work now.  Is there anyway that I can fix this?

  Thank you. I came across this one play me with the Fn key.  Being a computer laptop and everything.  There can be no separate numbers.

• Not possible to activate the external monitor on Satellite M40X-159

  Hallo, I have to drive a VGA monitor external in a notebook of SM40X-159, but without losing the display on built-in LCD.
  I am not able to do that!
  When I select external monitor LCD turn black!
  How can I solve this problem?

  Thank you for the answers.

  Hello Fabio

  With the combination FN + F5 keyboard shortcut, you can change views. As far as I know, you have the icon with two screens.

  Good bye

• Satellite A200 - 26 d display is visible only on the external monitor

  I have a display problem with a Satellite A200 - 26 d

  As I was using the laptop, the screen went black.
  Shut down and restarted the normal red Toshiba logo came but was dark and light to the right of the screen to the left.
  Screen went black new carries on reboot but still no display.

  Connected to an external display system works very well with that and show me in display properties there are 2 screens.

  All ideas

  > Plugged in an external system works very well with that and show me in display properties there are 2 screens.
  What happens if you want to use the FN + F5 key combination?
  Can you pass to the internal display again?

• How can I turn off the computer screen, but keep the external monitor receives the image?

  I have an external monitor attached to my laptop.  I wish I could close the laptop and still see the screen on the monitor.  I was able to do that until I had to have done repair replacement memory.

  I have an external monitor attached to my laptop.  I wish I could close the laptop and still see the screen on the monitor.  I was able to do that until I had to have done repair replacement memory.

  Change what happens when you close the lid...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/close-the-lid-on-my-notebook-and-continue-working/70630950-160A-4D94-b7ef-c30a2a80a8b3

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• "Send link by e-mail" 'NO' is grayed out, it works, but when the link appears on the body of the email it to "not a clickable link"(not highlighted). "»

  I sent the e-mail to me to see if when I received it I can click it but I still not able to click on it. I also check on default values and that they are correct.

  I use Windows Live Mail, IE 8, Windows Vista Home Premium SP2, 32-bit.

  Can someone give me a solution for this problem, please?

  Thank you

  Ustari.

  Hi Syed,

  I just figured out how to make this clickable link, once the link is on the body of the message (in black) all I had to do was press the "enter" key and automatically got highlighted in blue and underlined.

  Thanks again for trying to help me.

  Ustari.

• When you set the outgoing SMTP server, why not specifying the SMTP server 'by' is not working, but only the first specified server?

  I have several options for the outgoing SMTP server. I put a default and attempt to send. It fails and uses the first condition in the list.

  I restart Thunderbird and try to send. It uses the first condition in the list.

  I eliminated all SMTP servers in the list but the one I want, and it works.

  What escapes me, that I have observed this problem on all my systems for a long time?

  Kind regards

  Carl

  your lack of anything that account having a SMTP server associated with them, which, if your 'in' an account more wrinkles 'default '.

  Right click on a folder in account, and then select settings.
  Click on the account name in the settings and on the right is a drop down list and the value 'default' smtp for this account.