Satellite A200 - 26 d display is visible only on the external monitor

Similar Questions

• N5110 display not working, but when the external monitor is connected to come

  My screen does not work and I often hear 8 beeps at startup which indicate a problem with lcd display. But if I connect an external monitor, the LCD lights up also and then I can disconnect the external follow and work with my built-in screen. If I turned off or in hibernation etc the same problem occurs.

  Hi rndb_v,

  LCD screen could be about to fail, or it could be a cable problem. I suggest you try reseating the LCD cable. You can find the manuals here http://dell.to/1n5lDxb

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• What is it's ok to keep Satellite U500 closed while using the external monitor?

  Hello

  I have a Satellite U500.
  At home, I use a monitor and a keyboard. So I closed the laptop while working at home.

  I can do this, or would it damage the display or otherwise hinder ventilation properly somehow laptop?

  Thank you very much for your answers.
  Thierry

  Hi mate

  Of course, you can close the lid when the laptop is connected to the external display.
  I have a Satellite phone as well and it s connected to the external monitor.
  I also have a USB keyboard.

  I use the external keyboard instead of the internal keyboard for laptop and the cover is too firm

  Don t worried if he of ok!

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards

• Satellite A200-1BJ - no display on external monitor

  Hello

  I have a display problem with my laptop, which is:

  When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
  I used F5, Catalyst Control Center, but without success.
  When I connect it with a TV using s-video, I get the message "no signal".
  I think of the existence of the other devices, but the content is not sent to the external display.

  I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
  The problem is that he used to work, then suddenly it stopped display on external displays.
  I could not understand the problem, then I thought that the settings have been changed accidentally.
  So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

  My computer specs:
  -Toshiba Satellite A200-1BJ
  -Processor: Intel Core2 Duo
  -OS: Windows Vista editions Home Premium
  -Graphics card: ATI Mobility Radeon HD 2600

  Does anyone know the solution?

  Thanks in advance.

  In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried different cables? Maybe it s faulty or too long.

  Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

• Shaking image on the external monitor when the Satellite A200 is running on AC

  Hello

  I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

  I also tried to move the monitor further away from the laptop, but nothing.
  I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

  So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
  TX

  Hello

  Hmmm...
  I don't think it has to do something with magnetic fields.

  Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
  If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
  These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

  A solution for this?... If you know how to solder some fat capacitors somehow between the two...

  Or:
  It is a grounding problem
  I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
  leading to no color on TV.
  You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
  I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
  So experiment with it.
  First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

  Let me know!

  Welcomes Matz

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• How to make a clip visible only when the mouseY theatrical est.25?

  I really need the code to make a movieclip that is visible only if the mouse is near the back of the stage.  Here is the code that I tried to use, but it does not work well, thank you:

  thumb_container. Visible = false;

  stage.addEventListener (MouseEvent.MOUSE_MOVE, show);

  visible (e:MouseEvent) {}

  if(e.localY<stage.stageHeight/4) {}

  thumb_container. Visible = true;

  thumb_container. RemoveEventListener (MouseEvent.MOUSE_MOVE, show);

  thumb_container.addEventListener (MouseEvent.MOUSE_MOVE, hide);

  }

  }

  stage.addEventListener (MouseEvent.MOUSE_MOVE, hide);

  function hide {(e:MouseEvent)}

  if(e.localY>stage.stageHeight/4) {}

  thumb_container. Visible = false;

  thumb_container. RemoveEventListener (MouseEvent.MOUSE_MOVE, Hide);

  thumb_container.addEventListener (MouseEvent.MOUSE_MOVE, show);

  }

  }

  Try:

  stage.addEventListener (MouseEvent.MOUSE_MOVE, showhide);

  function showhide(e:MouseEvent) {}

  {if(e.localY>3*stage.stageHeight/4})

  thumb_container. Visible = true;

  } else {}

  thumb_container. Visible = false;

  }

  }

• Get a button to be visible only after the FLV has loaded?

  Hey everybody,
  
  Trying to find a solution to this issue, I found a lot of answers on the provision of a visible button after that a swf file is loaded, but not a flv. I preload an flv, although 20 sec, then it starts to play. But I have a button 'play' on the stage and he's sitting there, tempting people to hit while the bar preloader works its magic the preloading of the flv. I want the button to be visible only after the flv file has been loaded, or at least until it starts to play.
  I am a newbie to coding so please be forgiving and spell for me nice and clear. :-)

  
  Thank you.

  (BTW no components have been used)

  
  Here is my code;
  
  Stop();
  
  BTN control.
  btnPausePlay.onRelease = function() {}
  NS.pause ();
  }
  
  preload and play flv.
  
  var duration: number = 0;
  var ratio: Number = 0;
  var idTracking:Number = 0;
  var idLoading:Number = 0;
  
  var nc:NetConnection = new NetConnection();
  NC. Connect (null);
  var ns:NetStream = new NetStream (nc);
  my_video.attachVideo (NS);
  NS. Play ("presenter.flv");
  change this (20) to the amount of seconds to laod before playing th.
  ns.setBufferTime (15);
  
  ns.onMetaData = {function(evt:Object):Void}
  duration = evt.duration;
  ratio = track._width / duration;
  idTracking = setInterval (updateKnob, 50);
  idLoading = setInterval (updateLoader, 50);
  };
  
  ns.onStatus = {function(evt:Object):Void}
  If (this.time > 0 & & this.time > = (duration - 0.5)) {}
  gotoAndPlay (2)
  clearInterval (idTracking);
  delete this.onStatus;
  }
  };
  
  function updateKnob (): Void {}
  Knob._x = track._x + ns.time * ratio;
  }
  
  knob.onPress = function (): Void {}
  clearInterval (idTracking);
  NS.pause (true);
  this.onMouseMove = function (): Void {}
  If (track._xmouse > 0 & & track._xmouse < loader._width) {}
  This ._x = track._x + track._xmouse;
  }
  }
  }
  knob.onRelease = function (): Void {}
  delete this.onMouseMove;
  NS. Seek ((cette._x-track._x) / ratio);
  NS.pause (false);
  idTracking = setInterval (updateKnob, 50);
  }
  knob.onReleaseOutside = knob.onRelease;
  
  function updateLoader (): Void {}
  Loader._xscale = ns.bytesLoaded / ns.bytesTotal * 100;
  If (loader._xscale > = 98) {}
  Loader._xscale = 100;
  clearInterval (idLoading);
  }
  }
  
  track.onRelease = function (): Void {}
  If (this ._xmouse > 0 & & this ._xmouse < loader._width) {}
  clearInterval (idTracking);
  idTracking = setInterval (updateKnob, 50);
  NS. Seek (this ._xmouse/ratio);
  }
  }
  
  //////////////

  That is right.

  don't forget to initialize the _visible property is false.

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Portege Z830: I want to disable internal LCD and use only the external monitor

  I have a Toshiba Portege z830.
  I use my laptop in "Extended desktop", mode with an external monitor, which is the main display.
  In this mode, the two screens are still on, but I want the built-in LCD screen to be opened only when I use it.

  Is this possible?
  Thank you.

  Hello

  In my opinion, this is not possible.
  In extended mode, you use and display internal but extended and the long part is visible on the external monitor.
  In such a case its any that your external monitor is set as main display.

  If you want to use an external monitor only, you can only export the video signal on external monitor by pressing FN + F5

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• Satellite Pro L360-14F - cannot play videos on the external monitor

  Toshiba Satellite Pro L360-14F
  Video files as avi, flv, mp4 are played with SM-player etc on the screen of the laptop, but not on the external monitor attached.
  A newspaper there is the error message: MPlayer crashed by the bath OF CPU/FPU/RAM usage.

  Which may mean that?

  You already go to the external display by using the FN + F5 keys?
  To do this.

  In addition, you must go first to the external screen and then you need to start the windows media player or other video player.

  I advise to use the VLC Player. It s free fro and plays most of the files