N5K - N2K design: straight through the Active topology vs mobile comparison

Similar Questions

• How to delete a recent locations, through the application of my mobile?

  How to remove an element through the application on my mobile?

  Hi klutz126,

  You may want to take a look at this: How can a clear recent files?

  Thank you

  Abhishek

• How to set the text frames loops through the active doc

  Hi experts

  I have this script:

  myDoc var = app.activeDocument;

  myTextFrame = myDoc.textFrames;

  for (var F = myTextFrame.length;) F > 0; F --){

  While (myTextFrame [F] .overflows)

  myTextFrame [F].parentStory.pointSize-= 0.5;

  }

  but I still got the error after you run the script, can someone tell me what is the problem with set it?

  respect of

  John

  not sure, but it works

  myDoc = app.documents var [0];

  myPages var = myDoc.pages;

  for (var i = 0; i)< mypages.length;="" i++)="">

  myPage var = myDoc.pages.item (i);

  myFrame var = myPage.textFrames;

  for (var m = 0; m< myframe.length;="" m++)="">

  If (.overflows myFrame.item (m)) {}

  myFrame.item (m).parentStory.pointSize-= 0.5;

  }

  };

  };

• My computer does not have the active OS all the time!

  I have an Acer laptop that I bought used. When I received it, it has been completely reset. I had to add my own OS. I added Windows 7 as OS and it works for 10-30 days. I just bought the package of Windows 7 and I installed it on my desktop at home. It works fine and then eventually it will ask me again, product key and it will say that it is not a real product key! I just bought so I know it's true. I don't know how to fix the problem so that I can properly run my OS. It limits my ability when I did not have the appropriate access. I need to know how to fix my computer so it runs the operating system properly and I don't have to keep restore my computer to factory settings. Help, please!

  Original title: my computer will not keep a BONE!

  I have an Acer laptop that I bought used. When I received it, it has been completely reset. I had to add my own OS. I added Windows 7 as OS and it works for 10-30 days. I just bought the package of Windows 7 and I installed it on my desktop at home. It works fine and then eventually it will ask me again, product key and it will say that it is not a real product key! I just bought so I know it's true. I don't know how to fix the problem so that I can properly run my OS. It limits my ability when I did not have the appropriate access. I need to know how to fix my computer so it runs the operating system properly and I don't have to keep restore my computer to factory settings. Help, please!

  As long as it is not the same key that you used on your laptop, then try the phone activation.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• My Windows 7 ultimate is authentic, but does not have the activation key, can somebody help me please?

  I got my school of hollow of W7 and is still viable, had a key that worked very well, until I was stupid enough to try to use the kode to 64-bit upgrade, now it does not turn on and I don't know if I can return the old key. It is a MUST to activate? If so help! AS SOON AS POSSIBLE

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft. com/ ? kbid = 326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Get the popup to the activation of Windows 7 after new installation

  I used my actual activation key after a new installation (not an upgrade) of W7 on full CD/DVD with sticker. It seemed to work but I keep getting harassed to activate because the key is supposed to be invalid. Experiment with the options I tried to "Buy a new key online." which took me to a site Web of MS page that CITES "because it is installed on your Windows PC is authentic", etc. Something is wrong, but what?

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Hub topology and talk: can I traffic Internet road to PC at a radius of the site through the tunnel and NAT outside in the world on the 5520 hub?

  I don't know if it can be made to work or not, or if it's a mutually excluded NAT configuration that is not possible, but I have a 5520 ASA to my site central office with a fiber of 20Mbps Internet streams and two remote offices with ASA 5505 devices connected via DSL or cable modem and have finally got from Site to Site "spoke" VPN upward tunnels and run with the ability to route traffic to through a 'hairpin turn' speak-to-Spoke on the Hub Site 5520.

  I have desktop PC at each remote site speaks A & B that need to communicate directly with them to support a small group of work-style of the software point of sale that is actually hosted on a remote site A PC.

  PC on two remote sites must also be able to communicate with a credit card processing by the public Internet service, and I wish have the ASA 5505 units in each block of remote office as all traffic directly NAT'ed from each respective out on the local LAN PC straight Internet above each site cable modem or DSL modem. I want to force these PCs need to NAT their Internet-destination back through the ASA 5520 traffic located at the Home Office, on the VPN tunnels. In other words, I want the cable modem and DSL connections to route traffic strictly VPN encrypted to the Home Office and also behave like routers NAT for the local PC it.

  I can kill the 5505 prevents NAT for PCS in remote offices simply removing the rule dynamic NAT factory default for 'everything', but then I can't understand how to get my 5520 central to perform NAT which required of the remote PCs to talk to their service of Internet credit card processor without breaking the configs "NAT-free" necessary for VPN traffic to spoke-to-spoke to work. If I'm trying to put an entry static or dynamic NAT for a remote desktop on my 5520 ASA central, it breaks the VPN tunnel so that PC specific.

  Is that what I want to accomplish even possible with the ASA?

  Hi Neal,

  Yes, it's quite possible! below is a loss of things you need to do:

  (1) make sure of course on both the 5505 s of the ASA, you send ALL traffic from the local network through the VPN.

  (2) as Andrew mentioned, have the 'same-security-traffic permit intra-interface' command on the ASA 5520.

  (3) you do not have to have a configured proxy server, but it is also a good solution. But to make it work without her, assuming that the ASA 5505 remote subnets 192.168.1.0/24 and 192.168.2.0/24, add the config lines below to the ASA 5520:

  NAT (outside) 1 192.168.1.0 255.255.255.0

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Global 1 interface (outside)

  Please note that 1 id, and the interface can be replaced according to the configuration you already have in place in the ASA 5520.

  I don't know what kind of NAT exemptions are at the origin of the questions for you, but if you can put a sanitized one of your ASA 5505 and ASA 5520 config, I can make suggestions concerning the exact configuration.

  Let me know if it helps!

  Thank you and best regards,

  Assia

• They guided me through a restore and system recovery, but doesn't not eventually give me the activation code for my windows when finished.

  I had a problem with my window 7 do not allow me to do live updates. Supprt Tech guided me through the steps necessary when requiring eventually get a difficult access remotely guided. The tech assured me that since I don't have the activation code for my Windows 7 ultimate that it provide me on. That I would be prompted to enter one after recovery and the restoration was complete.

  I wonder if I'll be able to get this code now?

  Also, I lost all text documents I had written and recorded? We did a flash drive recovery I've used but I am unable to locate my document.

  Thanks for any help.

  System Restore does not destroy documents, but a recovery will depend on what has been done.

  If the remote technician entered the product key, so he could be there.

  First of all:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• My account through the Art Institute of Pittsburgh under the name of Clairelicious713 is not yet activated, please help

  My account through the Art Institute of Pittsburgh under the name of Clairelicious713 is not yet activated, please help

  Clarissa

  IF the account is provided through the school, you may be able to work with the school to get the job of the ot.  In addition, you must contact Support Adobe directly.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (adobe Creative Suite 5.5 Design Standard). I could through the Adobe Web site to download and install Photoshop 6; but the Adobe Cre

  To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (Adobe Creative Suite 5.5 Design Standard). Supposedly if you turn into a sequel they will disable all. I could, through the Adobe Web site to download and install Photoshop 6; but the Adobe Creative Suite 5.5 Design Standard is not put at my disposal for download. Any suggestions?

  Joseph, here is the link to Download CS5.5 products

  Let us know if you need help with it.

  Atul_Saini

• I want to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc.?

  I want to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc.?

  You are allowed to have two facilities enabled, so if you prefer you can keep ut on the current computer and just install it on the new as you did initially.  If you want to remove on the other machine, the first thing to do is to disable it by opening a program in the suite and by selecting help-> turn off in the top toolbar.  That's all you need to do to disable the software.  At this point if you prefer you can uninstall it if you want.

  As much as on the new nmachine, as I indicated just, just install it like you did the first time.

• Damaged my iPhone 5.  Receipt of replacement and went through the steps of activation.  All transferred very well - I thought.  Now, the phone only works when connected to wifi.  Help!

  Damaged my iPhone 5.  Make an insurance claim and received a replacement.  Has passed through the stages of restore/update / back.  Everything seemed to go well.  However, I can only send/receive texts or to use the phone when connected to wifi.  Saved settings and recontroler.  Nothing works.  Help!

  Hello

  I'm sorry to hear that you are not able to use your cell phone... Well well... like a cell phone.

  I suspect the 'texts' you send and receive through iMessage, not your cellular service provider network. When you look at the top left of the screen, it does not say 'search' or does it see the connect to your provider's network?

  Have you tried the steps If you cannot connect to a cellular or cell - data Apple Support Network?

• Choose the activity to the design of the synchronization

  Hello
  
  I have a bpel with 3 operations process. The service consumer can invoke any operation. For this I use Pick activity in the process bpel with 3 onMessage branches to receive input (Input and output message structures are different for each operation).
  
  (1) the problem is I need to meet the output to the appellant to synchronously. But when I create the pick activity, I'm not able to create an output variable, even if the bpel process is sync. How do I answer back exit?
  (2) how the wiring is also done between the partner link and choose acitvity in bpel process.
  
  Note: as the structure of message output is different for each operation I can't place the response outside the pick activity activity, I need her to be inside the pick itself activity. Please suggest accordingly.
  
  Thank you

  Hi bpeltechie,

  I guess you deleted the activity of "receiveInput" default of your bpel flow and then added the Pick activity.

  The xsd process must contain three elements for the entrance and three for the output. For example process1Elem, process2Elem and process3Elem.
  Define the message of type definitions in your process accordingly WSDL file define 3 operations for your process.
  Then:
  1. in the pick activity activate the indicator to create an Instance.
  2. Add three branches of message.
  3. in each branch, click the OnMessage and select your partner link (which includes 3 operations). The port type must be the same for the three branches, OnMessage and you should choose the operation on each branch.
  4. in each OnMessage dialog box, create a variable, which is your input variable.
  5. I suggest you create a scope in each branch.
  6. as a final activity in each branch (or extended) add a response activity
  7. click on the response activity and select your connection type and the port of partner (the same as the pick activity).
  8. for each branch, select the response operation and create the variable. It's your output variable.
  9. now, you have an output variable that you can assign in a previous action.

  About the wiring, it is identical to a flow normal synchronous bpel.

• Safeguarding of documents through scripting: name of the active file Get and set save path/file type

  I am writing a script that will:

  -Do all the invisible layers

  -Make the layer visible ' background'

  -Remove all the invisible layers

  -Save the document as EPS file (leaving the original intact)

  I am new to scripting and I based my script by copying the code of other scripts.

  Here is my code:

  var doc = app.activeDocument;

  var name = doc.name;

  hide var = function () {/ / hide all layers (based on http://forums.adobe.com/thread/644267( )}

  var L = doc.layers.length;

  for (j = 0; j < L; j ++) {doc.layers [j] .visible = false ;}

  }

  masquer();

  loop through all layers

  for (var i = 0; i < doc.layers.length; i ++) {}

  Create the illusrtratorSaveOptions object to set options to HAVE

  var saveOpts = new IllustratorSaveOptions();

  Definition of the IllustratorSaveOptions properties.

  saveOpts.embedLinkedFiles = true;

  saveOpts.fontSubsetThreshold = 0.0

  saveOpts.pdfCompatible = true

  Implemented Variable for the name of the access layer

  var currentLayer = app.activeDocument.layers [i];

  Loop through the layers and make the background layer visible

  If (currentLayer.name == 'Background') {}

  docName = name + currentLayer.name + ".eps";

  currentLayer.visible = true;

  }

  }

  / / Remove the invisible layers (based on http://www.cartotalk.com/index.php?showtopic=7491( )

  var myDoc = app.activeDocument;

  var layerCount = myDoc.layers.length;

  for (var ii = layerCount - 1; ii > = 0; ii-) {}

  var currentLayer = myDoc.layers [ii];

  currentLayer.locked = false;

  var subCount = currentLayer.layers.length;

  for (var subCount - 1; ss = ss > = 0; ss-) {}

  Underlayment var = currentLayer.layers [ss];

  subLayer.locked = false;

  If (subLayer.visible == false) {}

  subLayer.visible = true;

  subLayer.remove ();

  }

  }

  If (currentLayer.visible == false) {}

  currentLayer.visible = true;

  currentLayer.remove ();

  }

  }

  Save the document with a new name

  var saveName = new queue (doc.path + "/" + Nomdoc);

  doc.saveAs (saveName, saveOpts);

  Everything works well except:

  (1) it saves the document under the name of AdobeIllustratorBackground rather than the name of the document

  In addition, I don't know how to tell the script to save in EPS and specify the save location.

  Could someone give me some advice?          Thank you!

  There is an example script in Adobe Illustrator Scripting/CSx/Sample Scripts/JavaScript/miscellaneous/Save as PDF that has all the parts except the EPS Options.

  Go here for the script Guides and references.

  http://www.Adobe.com/devnet/Illustrator/scripting.html

• How to get the details of the activity of a process through the OMB more flow?

  Hi all
  I would like to know how to obtain details of the activity (bulk_size, operating_mode) of an activity by using more of the OMB.
  
  OMB + > OMBRETRIEVE PROCESS_FLOW "MY_PROCESS" ACTIVITY "MY_MAPPING"...
  
  Thank you!
  
  Sebastian

  Hi Sebastian

  For example, to retrieve a value from the mode of operation of the mapping activities
  GET PROPERTIES 'OPERATING_MODE' OMBRETRIEVE PROCESS_FLOW 'PROCESS_DATA"ACTIVITY"LOAD_PRODUCTS"PARAMETER (VALUE)

  If the parameter is bound to a variable name of the property is REQUIRED.

  You can retrieve the actual practice settings;
  GET SETTINGS 'LOAD_PRODUCTS' OMBRETRIEVE PROCESS_FLOW 'PROCESS_DATA' ACTIVITY

  See you soon
  David