Name of ADI 7.2 username/password error

Similar Questions

• Cannot install the collector emptying using VC integration option - username / password error

  Hi all

  «"" I'm trying to install collector Dump on the VC server or if I try to install on another server, when I choose the option for built-in VC it returns an error "" "" connection failed due to bad username and password»»»

  Snapshot attached

  I tried to change my password to less complex with special characters, but no go. I know that networking is fine because I am able to connect to my server from virtual center using Windows UNC path i.e. \\virtualcenterserver\c$

  This will come. Any Suggestions on why it returns this error. I use 5.5

  

  Thank you

  Vaibhav

  Hello

  When I installed it in the past, I used the:

  [email protected]

  SINGLE sign-on master account for this installation (because I knew that it was higher privilege and I was in a lab).

  Maybe give this user account a try? (admin@system-domain - if you are in 5.1).

• Getting ORA-01017: invalid username/password error only with specific tools

  Hello
  I'm still a Junior DBA familiar with Oracle. I have difficulties to access one of my databases with tools of TOAD and SQLDetective. When I try to connect to my database using these tools, I get the error:
  
  ORA - 01017: name of user and password invalid. connection refused
  
  Even if the password and user name is correct.
  
  I can correctly connect through other tools like SQLTools and sqlplus. I searched on this problem and I've seen people with the same problems, but I could not find a solution. The strange thing is, I can use TOAD and SQLDetective to connect to other databases with no problems. It seems to be present a specific database.
  
  My database is a database 11g on linux machine. I have clients 9i and 10 g installed on my machine. All my applications use the 9i on my machine home tnsnames.
  
  Any help on this would be greatly appreciated. Thank you.
  
  RGS,
  Rob
  
  Published by: rgilligan on April 16, 2010 02:11

  Hello, if it is 11g, look at the sec_case_sensitive_logon parameter. This default is true, which makes the case-sensitive password. Some tools/applications do a HIGHER or LOWER on the password and so what can the reason for the error

  Henner

• Jobs omitted by error: username/password invalid name

  I control grid on linux and I have installed the agent on windows. Everything works very well. But when I plan some work to jobs grid control have omitted by error: Invalid username and password.
  
  grid control want to belong to a specific group or something. Has nothing in the grid of control over this kind of permissions, I need the server to accomplish these tasks.
  
  y at - it a group or user name, I must add my jobs on the server windows to accomplist to success.

  Make sure that the Windows OS user, submitting jobs has the privilege of "connection as a batch job":

  http://download.Oracle.com/docs/CD/B19306_01/install.102/b14316/postcfg.htm#BABFAEIG

  Gridcontrol requires that you specify ID username/password for the host where the agents run.

  Werner

• ORA-01017: username/password invalid name - OS authentication failure

  Hi all

  Oracle 11G 11.2.0.3.0 running on Windows 2008R2 64-bit

  I am trying to get Windows authentication to work, local to the database server, but I continue to turn in the error ORA-01017.

  C:\Users\xxx>sqlplus /
  SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 14 09:00:29 2014
  Copyright (c) 1982, 2011, Oracle.  All rights reserved.
  ERROR:
  ORA-01017: invalid username/password; logon denied
  

  When I connect as SYS, here are the parameter values of os_auth (os_authent_suffix must be ' ' due to a requirement of the application.) We strive to connect an application to a remote server by using the windows credentials (IE DOMAIN\APPSVC)

  C:\Users\xxx>sqlplus / as sysdba
  SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 14 09:01:26 2014
  Copyright (c) 1982, 2011, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  SQL> show parameter os_auth;
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  os_authent_prefix                    string      ""
  remote_os_authent                    boolean     FALSE
  

  Here's my tnsnames file:

  # tnsnames.ora Network Configuration File: C:\app\Oracle11G\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      )
      (CONNECT_DATA =
        (SID = CLRExtProc)
        (PRESENTATION = RO)
      )
    )
  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = CGYORADEV02.corp.DOMAIN.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl.corp.DOMAIN.com)
      )
    )
  

  Here's my sqlnet.ora file:

  # sqlnet.ora Network Configuration File: C:\app\Oracle11G\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  # This file is actually generated by netca. But if customers choose to 
  # install "Software Only", this file wont exist and without the native 
  # authentication, they will not be able to connect to the database on NT.
  SQLNET.AUTHENTICATION_SERVICES= (NTS)
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  

  I created the user as below:

  SQL> select * from all_users;
  USERNAME                          USER_ID CREATED
  ------------------------------ ---------- ---------
  DOMAIN\XXX               98 14-AUG-14
  

  So the first step, what I'm trying to prove that the database server can accept and allow the windows credentials and then I take the next step in trying to test authentication remotely to this database server using authentication Windows/OS

  Any help appreciated, thanks in advance

  You seem to have put the os_authent_prefix to a pair of double quotes. This is not going to work! You must erase it completely, the use of quotes twosingle. Like this:

  orclz >

  orclz > alter system set os_authent_prefix = "scope = spfile;

  Modified system.

  orclz > force boot

  ORACLE instance started.

  Total System Global Area 784998400 bytes

  Bytes of size 2407584 fixed

  327156576 variable size bytes

  448790528 of database buffers bytes

  Redo buffers 6643712 bytes

  Mounted database.

  Open database.

  orclz > sho setting pref

  VALUE OF TYPE NAME

  ------------------------------------ ---------- ----------------------

  asm_preferred_read_failure_groups string

  os_authent_prefix string

  orclz >

• How to cancel name for username/password when you access the WIn7 computer to stream?

  Hello

  I have a win7 computer and I would like to access it from a stream. I see the computer win 7 banners, but when I try to connect to access shared folders, it requires username & password. I don't know what they are. I have another computer with Vista from where I can access the computer of win 7. I can also access files on the computer of vista of banners.
  I turned on the discovery network, printer and file sharing, turn on sharing so anyone can read & write files in the public folder. Disabled password protection sharing and allowed Windows to manage the homegroup connections (recommended).
  Can any suggestions on how I disable the name of user and password? or at least what is it?
  Thank you
  Leon.
  PS: He used to work properly without a username, but suddenly he began to pose for her (probably after that I restarted the computer or the streamed)

  Hello

  I understand that you want to cancel the name for username/password when you access the WIn7 computer to stream.

  I suggest you to send your query on the forum of streamer and I hope that they will be able to guide you in the right direction.

  Here is the link:

  http://support-splashtop2.Splashtop.com/forums

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• ORA-12154 for sqlplus username/password@TNS but tns ping works and sqlplus username@TNS works.

  Hello-

  I am facing the following question when I try to connect by using the command prompt sqlplus for Oracle 11.2.0.3 DB installed and running on HP - UX.

  The password is not all special characters & I also tried with the double quotes which did not work.

  Following want to work with username/password@TNSNAME because I'm trying to get my application to connect to the database, the schema mentioned because it uses the jdbc connection with the connection as (username/password@TNS:1521) string.

  C:\Users>sqlplus username/Pa55w0rd@DBNAME;
  
  
  SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 10 07:21:43 2016
  
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  
  ERROR:
  ORA-12154: TNS:could not resolve the connect identifier specified
  
  
  
  
  Enter user-name:
  C:\Users>tnsping DBNAME
  
  
  TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 10-FEB-2
  016 07:21:57
  
  
  Copyright (c) 1997, 2010, Oracle.  All rights reserved.
  
  
  Used parameter files:
  C:\app\product\11.2.0\client_2\network\admin\sqlnet.ora
  
  
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = server.domain) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DBNAME)))
  OK (50 msec)
  
  
  C:\Users>sqlplus username@DBNAME
  
  
  SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 10 07:22:05 2016
  
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  
  Enter password:
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Automatic Storage Management, OLAP, Data Mining
  and Real Application Testing options
  
  
  SQL> show user
  USER is "username"
  SQL> exit
  Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64
  bit Production
  With the Partitioning, Automatic Storage Management, OLAP, Data Mining
  and Real Application Testing options
  
  
  C:\Users>
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  content content of tnsnames.ora & sqlnet.ora:

  DBNAME =
  (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP) (HOST = server.domain)  (PORT = 1521))
      (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DBNAME)
      )
  )
  

  # sqlnet.ora Network Configuration File: C:\app\product\11.2.0\client_2\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  
  
  # This file is actually generated by netca. But if customers choose to 
  # install "Software Only", this file wont exist and without the native 
  # authentication, they will not be able to connect to the database on NT.
  
  
  #SQLNET.AUTHENTICATION_SERVICES= (NTS)
  
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  
  
  
  
  
  
  
  

  Thanks in advance

  Hello

  sqlplus username/Pa55w0rd@DBNAME;

  Try it without the semicolon;

  sqlplus username/Pa55w0rd@DBNAME

  Regards Thomas

• Cannot connect through the ORA-01017 Invalid Username/Password database link

  Hello

  I have two virtual machines with Oracle 11 g 2 and one with Oracle 12 c installed on RHEL 6

  I wanted to install a dblink between the 2, but after you have created the dblink I get error: ORA - 01017 Invalid username/password

  Now, I know, the error is clear enough but when I try to connect using netmgr it works

  So just to summarize, Oracle 12 c, I'm trying to connect to Oracle 11 g using a DBLINK but I get ORA-01017

  Since Oracle 12 c, I created a new service so that I have the remote db alias in tnsname.ora and at the end of the process, when they ask for test connection, I can connect successfully to remote db

  Then I created a dblink according to the following:

  SQL > CREATE PUBLIC DBLINK LINK DATABASE to CONNECT to

  "hr""" IDENTIFIED BY ' password ' with the HELP of 'REMOTEDB ';

  If I then select * from employees@dblink, I get the error

  What I've noticed, it is that in the 11g (the target machine) I can not connect with OS authentication, don't know if its related

  If i: sqlplus / as sysdba I get ORA-01031 insufficient become

  I have to connect to the Linux box as user 'oracle', who is a member of the groups oinstall dba

  Am I missing something?

  Thank you!

  CHRI$ says:

  SQL > CREATE PUBLIC DATABASE LINK DBLINK TO CONNECT TO

  'hr' IDENTIFIED BY 'password' with the HELP of "REMOTEDB";

  You will probably have to create the link without containing the user name and the word in double quotes.

• Hide the username / password when connecting to the database

  I need to find a way to hide the user name / password when connecting to the database (via a script), or by encryption or any other method that hides this information when I connect to the database.

  I use Oracle 11 g.

  I tried with the portfolio method, but could not connect to the database of the error below, even the user name and password:

  ERROR:

  ORA-01017: invalid username / password; connection refused

  I plugged this way (after the cover configuration):

  sqlplus /@DB

  Please help me.

  Concerning

  Luiza

  Hi Luiza,

  Try to find out why the portfolio method does not work, check the implementation using ref 340559.1 Note

  Check also for example client and server versions / compatibility, evolves sec_case_sensitive_logon relevant parameter (as a test, because it must be true) etc.

  Greetings,

  Damage ten Monkshood

• Not able to connect using sqlplus username/password@dbname

  Hello

  I am new to Oracle, upon request to help me solve this problem.

  I am trying to connect to the database using the schema name and the password as:

  sqlplus username/password@dbname

  But it gives me the following error:

  ERROR:

  ORA-01017: name of user and password invalid. connection refused

  But I'm able to connect with the same username and password when I just spent like:

  $sqlplus

  Enter the user name: user name

  Enter the password: password

  SQL >

  
  

  I checked the tnsnames.ora and sqlnet.ora file and the values inside these files are perfect.

  I have only a single database on this computer.

  Machine OS: linux

  Please help me is to resolve this.

  Thank you

  -Rajiv

  mferrera wrote:

  Stevens thank you for your quick response...

  The ORACLE_SID is worth of database to which I want to connect to... and like I said, I have only a single database on this computer... so no question to connect to other databases...

  Yes, there is a question to connect to a different database.  Oracle is too dumb to lie down, particularly on your reported error message.  You provide is not exactly the same credentials or your connection remotely ("@dbname") points to a different database.  Note that when you use this syntax, 'database_name' is not the name of the database, but rather the name of an entry in tnsnames.ora.  This entry specifies the target host and port, as well as the name of the service (database).

  Use copy and paste from a command line session to show us the full order and full power of 'tnsping database_name. "

  where 'database_name' are any real value you used when you received the error.

• Impossible to execute cli/request username password commands

  Trying to get my install vMA going so I can manage my new esxi servers. One of the first things I wanted to do was configure iscsi multipathing using the device of the vma. So far, I am unable to do so.

  After the vma installed, I've added one of my esxi servers. I was able to add the server without problem, and I put it as target server for execution of cli commands. When I try to run commands if he invites to new name of username/password, then return an error: unable to connect to the local host. I don't know why he keeps asking to specify the name of user and password after I put the host that the target server? I am connected to the vma as vi-admin.

  This is the command I am trying to execute to configure multiple paths:

  Connect vmk1 for vmhba33: esxcli swiscsi nic add-n d vmhba33 vmk1.

  Connect vmk2 to vmhba33: esxcli swiscsi add-n vmk2 d vmhba33 nic.

  Any help is greatly appreciated, getting very frustrated until now...

  Thank you

  Kevin

  It seems that with esxcli, you need to specify the server option.  And it can work without prompting for a user / password

  [vi-admin@vma ~] [192.168.1.54] $ esxcli - Server 192.168.1.54 swiscsi nic add - n d vmhba33 vmk1

• CCA813 - Erro. Invalid Username / password.

  Hi, I installed CCA813 and when I tried to connect using netadmin and password 1234 in TAW, some errors have occurred: error. Invalid Username / password.
  
  Could you help me please?
  
  Journal CallCenterAnywhere.log:
  
  2009 09 14:05:21, 659 [172.23.2.18] DEBUG review: 21.handleMessage(BusClient_IM.java:142) - * [KEEP_ALIVE 172.23.2.18] *.
  out 09 2009 14:05:22, 299 [http - 8080-$4 13389826] revision DEBUG: 38.doPost(ProxyLoginHandler.java:118) - action received [1002]
  out 09 2009 14:05:22, 299 [http - 8080-$4 13389826] DEBUG review: 14.executeQueryPrepared(DatabaseService.java:324) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [SELECT companyid, name, alias, zone, dateformatid, remotecontacts, remoteclienthistory, remotequalitycontrol, externalapp, RunApp, textlabel, htmlfile, enablecustomtab, countryid, enableexternalapp, enablepredictive, enablepreview, donotrecordstatus, applicationtype, runhtmlapp, enabledialout, securitypolicyid, displayname, templateid companies WHERE (alias =?) AND (isdeleted = 0)]
  out 09 2009 14:05:22, 487 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 534 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [Select templateid of companies where the companyid information = 1]
  out 09 2009 14:05:22, 534 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 534 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [SELECT Id_option, companytemplateinstances FROM optionvalue where templateid = 101 AND isdeleted = 0]
  out 09 2009 14:05:22, 596 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 596 [http - 8080-$4 13389826] INFO review: 38.authenticate(ProxyLoginHandler.java:191) - Login type Alias [1002] [System] [netadmin] username password [*] language Id [1]
  out 09 2009 14:05:22, 596 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select languagelibraryid as ID from the library of companies where companyId = 1]
  out 09 2009 14:05:22, 706 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 706 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select name, description from regionalizationlibrary where regionalizationlibraryid = 1 AND isdeleted = 0]
  out 09 2009 14:05:22, 706 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 815 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281)-ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select lk.value as displayname, sequence, ltl.elementid, regionalizationlibraryelements ltl regionalizationlibraryid, localelanguages ll, localekeys lk where ltl.regionalizationlibraryid = 1 AND ll.usage = 1 AND lk.localelanguageid = 1 AND lk.localevariantid = 1 AND ll.localelanguageid = ltl.elementid and (ll.language + '_' + ll.country) = lk.keyid AND ltl.isdeleted = 0]
  out 09 2009 14:05:22, 924 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 924 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281)-ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select lk.value as displayname, ll.localelanguageid as elementid localelanguages ll, localekeys lk where ll.usage = 1 AND lk.localelanguageid = 1 AND lk.localevariantid = 1 AND ('_', ll.language + ll.country) = lk.keyid AND (ll.localelanguageid not in (select ltli.elementid in the regionalizationlibraryelements ltli where ltli.isdeleted = 0 and ltli.regionalizationlibraryid = 1))]
  out 09 2009 14:05:23, 034 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  09 Out 2009 14:05:23,034 [http--8080-4$13389826] DEBUG RegionalizationLibrary.populateBean(RegionalizationLibrary.java:210) - command[]com.taw.clients.am.regionalization.RegionalizationLibraryElement@56d6cfcom.taw.clients.am.regionalization.RegionalizationLibraryElement@130b13ccom.taw.clients.am.regionalization.RegionalizationLibraryElement@1c3e3fbcom.taw.clients.am.regionalization.RegionalizationLibraryElement@1aca5e2com.taw.clients.am.regionalization.RegionalizationLibraryElement@1be9a50com.taw.clients.am.regionalization.RegionalizationLibraryElement@8518d4
  out 09 2009 14:05:23, 143 [http - 8080-$4 13389826] RegionalizationLibrary.getLanguagesFormatter(RegionalizationLibrary.java:494) DEBUG - * new LanguagesFormatter
  out 09 2009 14:05:23, 143 [http - 8080-$4 13389826] revision DEBUG: 38.getDefinedLanguageId(ProxyLoginHandler.java:971) - regionalisation return case 1 in the list [1]
  out 09 2009 14:05:23, 159 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [SELECT jrelibraryid, name, description, version, classid, cabdownloadurl, type, defaultjre, sequence, isdeleted FROM jreslibrary WHERE isdeleted = 0 ORDER BY ASC order]
  out 09 2009 14:05:23, 159 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  2009 09 14:05:23, DEBUG 174 [http - 8080-$4 13389826] UserConfiguration [revision: 20].load(UserConfiguration.java:101) - User Configuration load
  out 09 2009 14:05:23, 252 [http - 8080-$4 13389826] ERROR UserConfiguration [revision: 20].load(UserConfiguration.java:232) - error loading database information
  java.lang.NullPointerException
  at com.taw.database.DatabaseService.pingDB(DatabaseService.java:69)
  at com.taw.database.DatabaseService.isConnectionError(DatabaseService.java:101)
  at com.taw.database.DatabaseConnections.executeQueryPrepared(DatabaseConnections.java:214)
  at com.taw.database.DatabaseConnections.executeQueryPrepared(DatabaseConnections.java:182)
  at com.taw.database.DatabaseServices.executeQueryPreparedStatement(DatabaseServices.java:129)
  at com.taw.clients.objects.agent.UserConfiguration.load(UserConfiguration.java:141)
  at com.taw.web.security.UserAuthentication.load(UserAuthentication.java:404)
  at com.taw.web.ProxyLoginHandler.authenticate(ProxyLoginHandler.java:227)
  at com.taw.web.ProxyLoginHandler.doPost(ProxyLoginHandler.java:126)
  at com.taw.web.ProxyLoginHandler.service(ProxyLoginHandler.java:89)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:91)
  at com.caucho.server.dispatch.ServletFilterChain.doFilter(ServletFilterChain.java:103)
  at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:187)
  at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:265)
  at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:273)
  at com.caucho.server.port.TcpConnection.run(TcpConnection.java:682)
  to com.caucho.util.ThreadPool$ Item.runTasks (ThreadPool.java:743)
  to com.caucho.util.ThreadPool$ Item.run (ThreadPool.java:662)
  at java.lang.Thread.run(Thread.java:619)
  2009 09 14:05:23, 362 [http - 8080-$4 13389826] INFO UserAuthentication [revision: 23].load(UserAuthentication.java:405) -.
  
  loading of the user
  
  Edited by: user10089112 09/10/2009 13:27
  
  Edited by: user10089112 09/10/2009 13:29

  It can be two problems:
  1 error then dabase population (Analize setup of the population of the database logs) GOLD direct login to databases and to analyze the USERS cca admin schema table. If the user netadmin record exists?
  2. you set up bad jdbc have resources or enter wrong parameters to the Web.XML file TAW - general.war.

  This is part of the example in the Web.XML for the Oracle database:

  
  databasePlatform
  Oracle
  

  
  databaseDatasource
  cca_ds
  

  
  databaseUser
  cc812
  

  
  databasePassword
  password
  

  
  
  class databaseSchema
  CCAADMIN
  

  
  databaseDatasourceReadOnly
  cca_ds
  

  
  databaseUserReadOnly
  ROCC
  

  
  databasePasswordReadOnly
  password
  

  
  databaseSchemaReadOnly
  CCAADMIN
  

  Replace "BOLD" with your values and redeploy the application TAW.

  Jon.

• Wireless router requesting domain username, password and logon

  I recently bought a router without wire - WBR - T2 - as my old netgear router has stopped working. I can connect via the ethernet fine connection and access the internet. But on my computer Vista laptop when I try to connect to the wireless network, what I asks me to enter a username, password and domain logon. The old netgear router has not asked for these. Any help if her I need information would be appreciated.

  Thank you
  Jon

  I don't know where you get the application for the user name, etc. Your computer is on a domain? In the meantime, here is general information about the implementation of a wireless network. See if anything here helps you.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.
  MS - MVP - Elephant Boy computers - don't panic!

• Not allowed instant access to my Windows Mail without username & password! Can't remember either! WHY?

  I can't access my Windows mail. Safety sentre suddenly gives me a pop - up window, who want a username & password for connection home.  I do know this... never needed before.  Help!  What should I do now?

  I think I might need expert advice.  Nothing of what I'm trying to help me in this :(((

  If you have forgotten your username and password, call your ISP (internet service provider).
  Your ISP is the one who gave you the user name and password. They have the record. Ask them.

  At the same time ask if there is a technician who can help you with the problem of popup box.

  PS You should post this question in the forum for networking and online:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking?tab=unanswered

• zero or change username & password for a connection to another computer on the local network?

  When you open the network, and see you computers and or network for the Working Group action, well, I entered accidentally the wrong username / password for the computer, and I can't seem to change the username-password and or reset it.

  On the local network, I have a linux machine using samba, all permissions are correct, since the box vista * can * connect just fine and have access to everything which, however, on the vista box, I checked still remember the name of user and password, and now I can't change it on another account, I need to take it.

  I have searched for hours and I can't seem to find the answer.

  I tried to disable the account on the linux side and this does not, however, so, he says: "access denied", with no way to enter a new username / password!

  Anyone has an idea on how to solve this problem?

  Finally found the answer.

  In the cmd prompt, (Administrator rights), making control userpasswords2, and then tap the Advanced tab and finally, the button manage passwords.