Hide the username / password when connecting to the database

Similar Questions

• How to cancel name for username/password when you access the WIn7 computer to stream?

  Hello

  I have a win7 computer and I would like to access it from a stream. I see the computer win 7 banners, but when I try to connect to access shared folders, it requires username & password. I don't know what they are. I have another computer with Vista from where I can access the computer of win 7. I can also access files on the computer of vista of banners.
  I turned on the discovery network, printer and file sharing, turn on sharing so anyone can read & write files in the public folder. Disabled password protection sharing and allowed Windows to manage the homegroup connections (recommended).
  Can any suggestions on how I disable the name of user and password? or at least what is it?
  Thank you
  Leon.
  PS: He used to work properly without a username, but suddenly he began to pose for her (probably after that I restarted the computer or the streamed)

  Hello

  I understand that you want to cancel the name for username/password when you access the WIn7 computer to stream.

  I suggest you to send your query on the forum of streamer and I hope that they will be able to guide you in the right direction.

  Here is the link:

  http://support-splashtop2.Splashtop.com/forums

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Get the "failed connection: incompatibility of username/password when you use IE accessing the page of Configurator vco.

  When configuring a device to vCO 5.5.2 I can't login the configuration page https://:8283/ using IE as your browser. I constantly get the message: ' failed connection: incompatibility of the username/password or account temporarily blocked after too many failed attempts. But not changed the error even after that I changed the password. Suresh -

  Use a different browser (Firefox or Chrome) and it will work ;-)

  Kind regards

  Marc

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• How to remove the password when connecting?

  Original title: Windows startup

  I run Windows 7 (64 bit) on a portable computer and a desktop computer without password on each of them. When I opened my computer the morning the laptop accesses programs without having to do anything myself. For the office, I have the key STROKE so that Windows will be ready to start. Can someone tell me how to run the office without blocking on the password page

  Here you go:

  1. press Windows + R key on your keyboard.

  2. Enter the following command and press ENTER:

  netplwiz

  3 click your account name.

  4. uncheck the box that requires users to enter a password.

  5. click on OK.

  6. Enter your password when you are prompted, and then click OK.

  7. make a note of this method and your password (because you will be to forget both!)

• Windows 7 release suddenly of correct password when connecting.

  Recently, I put a password for my computer. I locked my computer and typed in it (so I know for a fact that his right). But when I started my PC this morning he automatically brings me to a screen saying "username and password is incorrect." I press OK and my password (WHICH IS 100% GOOD) it says it is bad.

  So, when my computer starts up I pressed F8 and went to repair the system. It brings me to the screen to enter a password, I type the same word EXACTLY as before and it let me. I am trying to log into my account user "Tyquan" to start my PC AND on the repair of the system.

  I don't have a single account which is administrator, I never put a password when setting up my windows for the first time, and even if I did it would be one of the 3 passwords (I tried them all and all stupid variants of them they might be)

  I'm just confused as to why my computer is rejecting my password on one screen but accept it in another.

  Im running windows 7 64 bit

  Thanks in advance for all your help

  Start the machine in Repair Mode, then use system restore to restore Windows to a point where you were able to log in.

• How can I fix an 'Access denied' error when connecting to mySQL database to a site (I'm sure I can get...)

  Hello

  I had a search on the forums and I don't see anyone with the same problem so I apologize if this has been asked before.

  I need to connect a database to a Web site so that members can register and save it to some pages (not all pages - only a 'members only' section).

  I created the database, tested and it works very well (I used XAMMP/PHPmyAdmin).

  In DreamWeaver CS6, I chose the type of document from the page (PHP) and set up the testing server. If I go to site Configuration > server for the site and click on test, it connects successfully. Note that the test server is hosted at the University, that I work - there is a password required, but I entered it on the test set up server and it seems connects very well, as I get the message successfully at this stage.

  When I go to connect the mySQL connection and select the database I get the error "access is denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured. »

  Any ideas? It's driving me crazy!

  I understand that after several unsuccessful searches on Google, so I post the solution here for someone else with the same question that could end up here.

  If you configure your test server in the inetpub/wwwroot/folder then Dreamweaver cannot make changes (such as adding files) unless you are running as an administrator, so it occurred to me that maybe the database connections are also affected.  Of course, as soon as I leave Dreamweaver and restarted as an administrator, I was able to connect to the MySQL database using the databases Panel.  If you don't know how to run a program as an administrator, it is pretty easy: just right click on Dreamweaver icon and select "Run As Administrator" when you start the program.  There are a lot of tutorials out there that can give you the necessary steps for always loads a program as an administrator if you don't do right click every time.

  Version: Dreamweaver CC 2015.

• MacBook pro not recognizing the correct password when connecting

  When I try to login, it rejects the password - if I change username, then return that he recognizes her!

  Hi Richard2938,

  If your password doesn't work intermittently, first try to restart your computer.  If the problem persists, use the S.o.s. Keychain utility to repair your login keychain.

  Keychain Access: If you have a problem with key ring

  Otherwise, you can reset your password to admin (login):

  Change or reset the password of a user account from OS X

  Take care

• (Redirected) Do not accept the password when connecting

  Have a Dell laptop 15 3520 running Windows 8.1 have been logging in fine and all of a sudden it will not recognize the password. System is configured to connect by using the account of Microsoft and no password. Now, he starts asking a password and can't log into Windows at all. I went to another computer and connected to the Microsoft account and changed the password, but when I return to the locked computer it does not accept the new password either. Do not wipe and reload Windows 8 and Windows 8.1 again.

  Hi WestwindRV,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• How can I disable the password appears in the box of wireless network properties security password when connecting always automatically?

  My netbook IBM X200s running Windows 7 is configured for you automatically connect to my internet TalkTalk router with the password defined. However, when I view the window wireless connections available in the taskbar and right click on the connection-> properties-security password is sitting in the area password - with the option to "display characters. How to turn off the box to show the password in the first place while retaining the automatic connection to the opening?

  Hello

  Welcome to the Microsoft community.

  Unfortunately, it is not possible to disable the password to appear.

  See this link for more information:

  http://Windows.Microsoft.com/en-in/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  Please let us know if you need help with Windows.

  We will be happy to help you.

• HP ENVY 4520: HP ENVY 4520, ask for password when connecting via the iPad

  Hello
  Depending on the subject, what password he asks?

  I don't remember setting a place at installation.

  You must print the Config network to see your password.

• My office has just done a repair XP after a hardware change and now all user accounts have disappeared and he asks the administrator password when connecting!

  We have a unique system of Windows XP that run the software of engineering for certain calculations. All other systems running Windows 7, but what a XP system because it's the only thing that our calculations software runs on.

  CPU of the XP computer died on us and we had to replace the card mother and CPU. After the change of equipment, following Microsoft's OWN guide on the running an XP repair, we ran the system repair and got all the way to the login screen (no blue screen not as before repair). However, none of the accounts are there and he asks an administrators password. The system has NEVER had a password to our knowledge, it was built in the House, and all simply by clicking on the Administrative login asks for a password.

  What can we do? We needed this fix before today and wait for the repair of the system to do. Is it possible to enter the system to run the software? We tried the SafeMode (all forms) and they all will ask a password after Windows loading.

  It's so frustrating.

  (PS I have been building computers for nearly 15 years and have never had this happen)

  Thanks for the quick response. I looked into the system with a "start-up" program All original profiles seem to still be there. I don't know how to make them appear well. Can you direct me or tell me, how to make profiles see the place?

  The biggest problem, outdoors is not be able to sign more, is that the engineering calculation software is locked to this PC. It can be installed anywhere else without having to pay for a VERY new (I think that thousands of dollars) expensive key or a new version of the software.

  :(

  Yes, it's a problem.
  I believe you can use a UBCD4Win CD or Hiren Boot CD to locate and right click on the files you want to change. And then, if you properly in your repair facility, you change the attributes after you're done.
  Some guides are better than others. And here's one that I like:
  http://www.windowsxpprofessional.WindowsReinstall.com/indexrepairguides.htm
  If necessary, hire a PC Tech. It's much cheaper than buying a license that is thousands of dollars!

• Username disappear when connecting with check user credentials

  Hello

  I'm trying to connect to a site SSL is enabled; I've already stored my password user name with FF.

  but when I try to log on here what is happening.

  • Type my user name and the same select in the menu dropdown.
  • Once I click on the user name
  • the field filled in password, the username disappears.

  You have a soulition to this?

  Kind regards
  Bromount.

  This problem is fixed in FireFox 33. So, we can mark this as resolved.

• Why need password when connecting Thunderbird not actually?

  Apparently, once a user is connected to the TB using the password, it is necessary once again
  to access the passwords stored (via Tools\Options\Security).

  BUT I FOUND - when the initial TB connection box, if you click Cancel instead
  give the password, you are immediately given access to the account (set
  to the mailbox where you left last TB). Then, if you want to access
  an another mailbox, you need only click on Cancel to give access. It is clearly
  a security bug - password is not needed to access the emails!

  However, if you connect using the password instead of click on cancel, TB
  the following dialog boxes do not appear.

  It seems that this password system protects only the stored passwords, not the
  contents of the mailbox of the account as well...

  It seems that this password system protects only the stored passwords, not the contents of the mailbox of the account as well.

  Passwords to Thunderbird can remember are your account passwords. They are necessary to access your account on the server. They are not necessary to access the (local) profile.

  You can set a master password to protect the account passwords.
  http://KB.mozillazine.org/Master_password

  See this article for more information on how to protect the profile.
  http://KB.mozillazine.org/Protect_the_profiles_contents

• Recover password when connected with SYS or SYSTEM

  Hello
  
  
  When I am connected SYSTEM (or SYS) I can retrieve value of the password through DBA_USERS table for my schema MYAPP. Is it possible to recover the real password?
  
  Version of Oracle 10 g r2
  
  Thank you
  Val.

  Hello

  No, the password is hashed for security reason.

  Best regards
  Jean Valentine