Name programmatically change a sequence in a sequence file
Hi, I was wondering if there is a way to programmatically change the name of (rename) a sequence in a sequence file. Thanks in advance!
You should be able to by this method: (assuming that the sequence you want to edit in the same file)
ThisContext.SequenceFile.GetSequenceByName (Parameters.OldName). Name = Parameters.NewName
It does not validate it works correctly but. You really need to check the new name does not already exist, and that the name is valid (only contain letters, numbers, and underscores. Name cannot contain spaces, begin with a digit or be empty. In addition, the name of t may not be 'Value')
Tags: NI Software
Similar Questions
-
Change the sequence of commands to generate two reports by USE with different names.
I have a special situation for the model of batch processing.
Each DUT consist of two distinct products that need to be tested as a single unit.
I can run every USE and generate a test for each report. -aka. The standard use case works very well.
However, we would like the records using this method. So I need a copy with a different name for each series.
The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.
I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.
I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.
All links to the relevant information would be useful. Thank you
Just copy these two steps and between them and the copies have another step that is just a statement. There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.
Ideally what you would do, is that the client using a callback. So, your code would look like this:
Write the object to measure report
Write the report of the object to be measured (on the fly)
Define report path reminder (override in customer OR statement step)
Write the object to measure report
Write the report of the object to be measured (on the fly)
Hope this helps,
-
change the sequence of client file when Ctrl F5
I have a 2011 test system based LabVIEW and teststand 2010. I modified the sequential model 'Single Pass' so that when you press Ctrl + F5, test 'main sequence' sequence of a self is executed, not the 'main sequence' of the currently loaded test sequence. Everything seems to work, but when the test report is created that it contains the name of the loaded test sequence, not the name of the automatic test sequence...
Is there a way to teststand that the sequence of the client is the not the test sequence loaded in teststand free test sequence when Ctrl + F5 was pressed, therefor the name of the report file will contain the name of the current not the name of the loaded test sequence automatic test sequence?
Any help or pointers would be very useful...
See you soon
Price of Derren
Instead of changing the model to change what sequence is called, you must change to modify the sequence of the client. Look at the example of DynamicClientSequenceFile in the directory examples of TestStand.
Hope this helps,
-Doug
-
How can I change the sequence of displayed in Thunderbird mail accounts?
I need to set up a laptop computer to take on the go. How can I change the sequence (list) of e-mail accounts in the vertical pane to match my office?
Install this add-on.
https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/ -
How to change the sequence of films in iMovie Theater
By exporting iMovie projects in iMovie Theater, the sequence of films is determined by the time of download. How to change the sequence of films in iMovie Theater list?
HI, breeaz,
I have not found a way to change the sequence of films shown in the movie screen.
If you access your movies in the Finder folder, then Ctrl-click on the folder of the theatre, you will find your movies to the poster
in the alphabetical order in archival records. I was not able to manually rearrange it. They can be rearranged in some categories, through the view menu item at the top of the screen and the changes applied to the entire window, but it was not carrying at the display of iMovie. In General, I'd like to make changes to the structure of iMovie in the finder. It can cause serious problems.
Best,
Rich
-
How can I change the sequence exported to iMovie?
When I finished making the video and it has exported, some errors found only. How can I change the sequence exported in the application iMovie editing new, mainly texts?
Just open the project that you exported from iMovie, make the changes necessary, then export again. (Sod / Murphy's law always ensures that errors found only after export)
Geoff.
-
Programmatically add a reminder of the sequence in a sequence file
How to add sequence recalls programmatically to a main sequence? For example, to configure, I get a table that tells me as the sequence files to run for each test instance. I want to call these files in sequence as a reminder of the sequence on the main sequence. I don't want to use the flow regulator because there are a large number of sequences for this ATE, and the test list may develop in the future.
Thank you
Shari Chen
Symmetricom
Thank you after the publication of themsg, I found sequence generator tool, and it was exactly what I was looking for!
Thank you again...
-
Change the sequence directly after loading sequences
Hello
I intend to write a sort of Profiler to see what stage most testtime consumtion.
That's why I use engine callbacks SequenceFilePreStep and SequenceFilePostStep.
Whenever a step in order is executed the SequenceFilePreStep generates a timestamp and after executing the step of the SequenceFilePostStep generates a different timestamp. Two timestamps can be used to estimate how long this step has been performed.
I use several different sequence files (for example a gall for characteristic sequence a sequence one to feature B and so on).
A sequence file can be called (charged) many times the sequence of higher level or any other file of sequence file.
My problem is that I don't want to edit each file sequence. Profiling should be initited automatically.
My idea is that the process template will add the mentioned subsequences above in each sequence file that is used during the execution of the testplan.
No idea how to implement that? As far as I've seen there is no ProcessModel callback that is called when loading a sequence file, is it not?
Thank you very much
Thorsten
I forgot to mention, I'm currently using Teststand 3.1, but intend to change to 4.x
No, you wouldn't. Read the description carefully. Also, I tested it by adding the process template. You can do the same thing and just put a simple message popup in there. The popup message fires once for each stage of your Client's sequence.
Kind regards
-
How to change the sequence of the BIOS?
Hello...
I made a bootable CD... using Seagate Disc Wizard... latest version... my computer does not start from the CD/DVD drive via the USB port of a Seagate 1 TB HDrive.
I have a new HP Pavilion Slimline desktop PC... 400 224
How can we change the sequence?
I was not in the BIOS from a few computers in return... I don't remember how I found it... Obviously, it was easy with the Compaq I had at the time.
Now, with this Windows 8 (8.1) I can't find anything yet... always moving in from previous HP Pavilion...
It would be well if HP does not assume or Microsoft assume what is desired by the owner about the 3rd - party backups or the CD/DVD drive boot options are not desired by the new owner. I'm not aware the inner workings computer that well. And I like the way the workings and the protections I used with the old computer. Apparently, I'm not one of those people who likes the change. Confusing times.
I would appreciate help with this... I'm still on warrante since have approximately a month.
With great satisfaction... truly... jazzman
Hi, scratching,
In all HP computers, there is the start menu, you can go to the startup by pressing the Esc key several times. Herer, you can go to the BIOS boot order and other diagnostic tools.
I've linked to a document relating to the boot for you order.
Hope this helps you
http://h10010.www1.HP.com/ewfrf/wc/document?CC=DK&LC=da&DLC=da&DocName=c01443326
Please let me know how it works.
-
How can I change the sequence of pictures in the picture library
It helps to have a button MOVE HERE
When I went to change the sequence of photos to create a slide show...cannot find or change anything.HelpWill not to happen outside of rename photos,.
Windows live photo gallery offers the possibility to rearrange your photos just for a slide show.
Open wlpg, find the folder or photos in several different folders, searching all the photos and videos from search on the search up option on top of the left column and begin to look at the little boxes that appear when you hover over the pictures,
When you have selected all the photos, click on (create a tab, then movie) or if offered slideshow, then all photos of will open it in a review of dialog box and slide it in the direction you want, click the next button when your done and follow the rest of the customization options.
-
How to disable "Change Key Sequence" language (when I hit Ctrl + space)
I found 2 wires a guy posted here (it uses Windows Vista):
http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/d8df1edc-2c9a-4f53-A492-df3165da46fa
http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/f01de525-73b2-4C4E-969e-b5aa001c0eb7However, I use Windows 7 Ultimate 32 b and get the same problem, I tried several ways but nothing can help me at all. I noticed his post Tuesday, April 28, 2009, almost 1 year ago. If anyone found the solution? Help me please!
Thank you very much! :)
Hello MyApp,
The same procedure is valid for Windows 7, here's how you can disable the keyboard in Windows 7 sequence:
1. click on start.
2. Select Control Panel.
3. under clock, language and region - click on change keyboards or other input methods.
4. click on change keyboards.
5. click on advanced key settings.
6. click on the sequence of modifier keys.
7. you will get a small windows called change Key Sequence popped up.
8. in what, click to clear the check box that says - Enable keys.
9. then click ok.
Kind regardsSavan - Microsoft technical support.
-
Changing the sequence of thumb in the Collections?
Hello
I created smart Collections inside the sets of the Collection through keywords, and then I tried to change the sequence of these inches in the order viewing good.
But the system will not allow it.
So, what are my options for a group of pictures of various records in one place, in the desired sequence?
Thank you very much
Raphael
PS Ce that means: tag your content to make it easier to find? How I tagged content?
Open the 'Smart' Collection of images,
Select all [CTRL + A]
Create a standard collection [+]
Change the sort order in the toolbar, or drag and drop to a sort of "Custom".
'Tag' in my opinion, is another term for "Keyword". When you the keyword of the images he puts a 'Tag' icon on this thumbnail preview.
-
How can I change the sequence of photos in slide shows (especially full frame)?
I am a beginner of the use of muse. I don't know how I can change the sequence of photos in slideshows?
2 ways:
1. display temporarily thumbnails and drag them to the right place.
2. open the layers panel, activate the slide show, click on the magnifying glass at the bottom of the layers panel to locate the slideshow widget. Drag the photo entries in the place you want.
-
How to change the sequence?
Hello gurus,
I have a sequence like this
I want to change the start with 100, can someone tell me how to change the sequenceCREATE SEQUENCE seq_idea START WITH 6 MAXVALUE 9999999999 MINVALUE 1 NOCYCLE NOCACHE NOORDER;
Kind regards
friendglory wrote:
Hello
You cannot change a sequence created with the value start.
Better, you drop the sequecne and recreate the sequence with what you want.Regads,
FameSee this link
http://docs.Oracle.com/CD/B28359_01/server.111/b28310/views002.htm#i1006623FYI :)
-
change the sequence currentvalue
How can I change my sequence so 1'000 ' 000 value of this attribute 'NextVal' would return me now? It is reset to the current value of the sequence. It is possible.
I see no such possibility here:
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_2011.htm
I tried successfully a this sentence:
Or should I do arithmetic as is done here:ALTER SEQUENCE Casino.Networkplayers_Code_Seq minvalue 1000000000--ORA-04007: MINVALUE cannot be made to exeed the current value
http://www.lifeaftercoffee.com/2005/10/20/changing-the-current-value-of-Oracle-sequences/
Published by: CharlesRoos on 29.10.2010 16:46Hello
Here's a way, if you can guarantee that no one else uses the sequence for one minute. (Revoke privileges if necessary)
Find the current value.
Add 1 to that and subtract your desired value.
Proceed to the this amount increment sequence.
A new issue.
Change back to the original amount INCREMENT.
The next issue genereate after this will be the value you want.For example:
REVOKE SELECT ON seq_x FROM PUBLIC; SELECT seq_x.NEXTVAL FROM dual; NEXTVAL ------- 178
1 000 000 - (178 + 1) = 999821, continue like this:
ALTER SEQUENCE seq_x INCREMENT BY 999821; SELECT seq_x.NEXTVAL FROM dual; NEXTVAL ------- 999999 ALTER SEQUENCE seq_x INCREMENT BY 1; GRANT SELECT ON seq_x TO PUBLIC;
Published by: Frank Kulash, October 29, 2010 09:52
Added example
Maybe you are looking for
-
Firefox doesn't remember the settings of the browser.
Every time I open firefox I reconfigure my preferences (homepage, internet history settings). This only happens when I close all firefox windows and tabs and then reopen firefox. My home page is my igoogle page. When I reopen it firefox it take me to
-
Configure Exchange server to allow the transfer of mail of the AS / 400
I need to configure my exchange server except my AS - 400 email, how to configure the exchange server
-
Windows 7 and drivers for scanner HP ScanJet 5300C
Bought a new computer with Windows 7 and have an existing scanner HP ScanJet 5300C which does not seem to be supported by HP. don't want to buy a new scanner. Can it work with my new computer?
-
Bug class API Dialog or UiAplication?...
Hi, I'm getting a strange behavior of the Dialog class. The thing is: On 4.2.1 (8100simulator): I call it Dialog.ask (Dialog.D_OK_CANCEL, "blah, blah, blah") of activate() UiApplication member and it works find. Dialog box appears and the program shu
-
I press connect on WiFi and the computer tries to connect to literally one second then stops?
Need help! But I can connect to my home WiFi, because it was on "connect automatically" before the problem started.