Programmatically add a reminder of the sequence in a sequence file

Similar Questions

• How to let axSequenceView view the sequence file, after the opening before the race.

  

  How to let axSequenceView view the sequence file, after the opening before the race.

  I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

  You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

• programmatically add/remove participants at the BPM group

  Hi all
  
  I know that I can use DirOrganizationalGroup class fuego to get the Group and see if the participant is a member of it, but is there a way I can only add/remove participants from the activity/code?
  
  Thanks in advance.

  You can use the assignToGroup DirHumanParticipant method.
  HTH

• documentation for the sequence file report does not display the parameters of the step

  The parameters of the step is missing in this report. Is it possible to add this just as you have included the sequence settings. Thank you.

  Sequence: MainSequence
  Type: Normal
  Disable the results for all stages: false
  Goto cleanup in case of failure: use the Station Option
  Number of installation steps: 2
  Number of steps: 10
  Number of steps of cleaning: 2
  Parameters:
  PartNumber String (by reference)

  -Stage: Installation Instruction
  StepType, adapter: Message Popup. 
  Description: NameOf (Step)
  Module loading and unloading Options: preload the beginning of execution, discharge the closure of movie file
  Record results: disabled
  Flow properties: Post Action:
  If)
  GoTo
  Record result: disabled

  I agree that it's frustrating.  I had the same problem recently.

  You should post it in the forums of idea: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/idb-p/teststandideas

  Or you can change the sequence that generates these and include parameters.  The source so that it is in: \Components\Tools\DocGen

  Hope this helps,

• Add new data to the table in a log file

  Hi all. I am new to Oracle and I need to also write new data table in a logfile on Linux in order to live in the display screen. My first thought was to write a trigger, and after some research on googled around, I finally came to this:
  
  create or replace trigger foo_insert
  After Insert on foo
  for each line
  declare
  f utl_file.file_type;
  s VARCHAR2 (255);
  Start
  s: =: new.udate | '-' || : new.time | ' ' || : new.foo | ' ' || : new.bar | ' ' || : new.xyzzy | ' ' || : new.frobozz | ' ' || : new.quux | ' ' || : new.wombat;
  f: = utl_file.fopen ('BLAH_BLAH', 'current.log', ' a');
  UTL_FILE.put_line (f, s);
  UTL_FILE.fclose (f);
  end foo_insert;
  
  It seems properly to add new data in the log file as new inserts occur, but open and close the file each time are of course not optimal.
  In the app real new lines could have inserted every second or two. How can I optimize it? In addition, the log file will be archived and turned every day, so there must be a way to effectively report the relaxation of the oracle to reopen the case.
  
  
  Thank you!

  >
  I would like to pursue the optimization of the trigger
  >
  As Ed suggested you need to think this through a few others and refine the requirements.

  You said "I am new to Oracle. So you may not realize that anything a trigger didn't REALLY EVEN HAPPEN! The transaction can still be restored by Oracle or by the appellant. Want that all the 'hiccups' look too? If this isn't the case, then you can not use a trigger to do this. You need the process that translates the trigger being called to do logging after the data is stored.

  It should be noted that this requirement is before we can offer solutions to a problem.

  Assuming you want the trigger record all attempts change the data, then the best way I know to do that is to minimize the work does the trigger.
  Another fundamental principle is to follow the advice of the Ed and have a clear separation and distinction between "what" should be done and 'how' to do it.

  To minimize the trigger work change proposed Nicosa approach. Create an AUTONOMOUS_TRANSACTION stored procedure that handles the 'how' and just have the trigger to transfer data to the stored procedure values. The trigger provides data; He doesn't know, or care, what is done with the data.

  The stored procedure is then free to use the files, a table, write to a file or any other method is proving to be the best. You can change the methods without affecting the trigger.

  A queue or table may contain data, but again once you need to think about the obligation. Do you need fair access to data only once? Now, you want a "tail". But what happens if this requirement change tomorrow? You won't have to redesign the architecture.

  With a queue once you delete the queue data it won't here later if you want to get it again. With a table you can take as long as you want.

  I would like to start by using a table to store the data. If you use a sequence number or "insert_date" value, you can always query the data of interest. The table just collects data. He does not care how to use data.

  So, by using proven design principles and knowing that the requirements are for the most part unknown and may change unexpectedly, I would be:

  1. create an AUTONOMOUS_TRANSACTION stored procedure that accepts the parameter data and the thicket in a simple logging table.
  2. change your trigger to call the procedure to step #1
  3. create another procedure that performs a query of 'tail' for you will depend on 'insert_date' number or sequence. This query can write data to a file or return a cursor ref that your script can use to provide data for display.

  The approach described above takes each step in the process relatively independent of the other stages.

  Until put you the finishing touches to the requirements that you do not want to lock up your initial design.

• Automatically update the sequence files (any)

  We have a very large number of sequence files that must be updated.  The "Types" have changed.

  Is it possible that TestStand (f1 2010) updated all the files in a directory, or if all goes well recursively?

  What I am used to doing is to check all the files off our Version control, select about 20 files simultaneously and open them in TestStand, save all, and then close them, then make another game...

  Is there a faster way?  (I expect to archive them out of Version control.)

  Mike

  Take a look at the converter file sequence located in tools > sequence of update files

• How to call sequence into LabVIEW, by providing the path of the sequence files.

  Hello

  Please give me a solution for call sequence from the API ActiveX LabVIEW file by entering the path of the LabVIEW user interface sequence.

  Thank you

  Wherry

  Here is a link I gave some pointers on how to run a file opened via Single Pass sequence.

  http://forums.NI.com/T5/NI-TestStand/direct-execution-of-the-sequence-when-UI-launches/m-p/2000819#M...

  How are you going to start this sequence is the user who selects the sequence on the disk?    Is already open in a SequenceViewMgr control?

  An operator interface would be more applicable to your situation?

  Thank you

  PH

• is it safe to use a view control of sequence to display the sequence file both for execution

  I have a Teststand UI written in Labview 2012.  It has a single control of sequence, and I use the ConnectSequenceView method to switch between the display just the loading sequence file and the running.  Allow me to reiterate.  When a file sequence is running, the control is connected to the execution Manager.  Otherwise, it is connected to sequenceFileView Manager.

  I begin to suspect that I have questions related to this control, when I do the following.

  1. load a movie file

  2 run Single Pass

  3. the execution ends

  4. unloading and Release sequence file

  5 load a different sequence file

  6. run single-pass

  7 Labview crashes

  Am I missing a step?

  Thank you

  Kevin

  So it seems the crash of Labview, I mentioned in the original post is unrelated to the joint use of display of the sequence control.  However during my troubleshooting, I noticed that I was missing cut from a point of view of control stage before connecting the other view.

  And for the record, I think that there are many things wrong with the architecture used in the complete example, but there also many too many features for what to.  Just need a simple "press a button" and "run a test" for operators.  Everyone uses the sequence editor.

  All right.  Thanks for the comments.

  Kevin

• can see us line numbers next to each step in the sequence file?

  Hello

  I have a file of sequence having 600 steps. I would like to know is there any option to the test to set number for each step in the sequence of line editor so that it is useful for the review.

  Example:

  1 Action1

  2 Action2

  ............

  600 Action600

  Kind regards

  Krishna

  Krishna,

  If you want just to know the index of a step, this information is displayed at the bottom of the sequence editor in the status bar.  It shows you how many steps there are in the sequence, how you have selected and the index of the selected steps.

  

  It is also possible to display the information in the view of the steps in a column, if you are ready to create a new column.  Follow the instructions in this KB to see how to create a new column:changing the properties of columns in the viewport of execution TestStand sequence editor.

  One of the types of columns is Index. Just set your column of this type and you'll see step index as shown below.

  

  

• How can I list by program stage names in the sequence file

  I need the list of all the steps in the movie TS file. For example, sequence.seq file cointains dwarf and it includes following steps:

  Step 1

  Step 2

  Step 3

  ...

  step100

  I can easily select all of these steps and then copy - paste them in the excel worksheet. However, I would like to do this programmatically because I very much .seq file containing many steps.

  Can you help me?

  Hi esanum,

  Have you seen this?

• Add a user in the system-jazn-"Data.xml" file

  I have an ADf application (developed in JDeveloper 10.1.3.3).
  It implements security using xml. (jazn.xml points to the system-jazn-"Data.xml")
  
  In the system-jazn-"Data.xml", I have entries like -
  -< user >
  < name > DataBase_User_OfYmnJXIxCAH90iuGKMkBoZmd5Sfm44M < / name >
  < guid > AA61EF7072F211DD8F62B3BA7CB157C2 < / guid >
  < powers {903} OfYmnJXIxCAH90iuGKMkBoZmd5Sfm44M > < / qualifications >
  < / user >
  
  no idea what are these entries and why they are here.

  Hello

  as it appears, it comes to forwarding password for a data source. In order to avoid the definitions of data source by clear text password, the defined data sources use an entry in the system-jazn-"Data.xml" where they are encrypted.

  Frank

• How to create ProcessModel calculate TOTAL as follows to call the file in the sequence?

  I made a custom operator Interface and I want to support a progress bar for giving the user indicates to what extent this time they represent.   I already have the infrastructure of reminder Setup so that the progress bar will be updated based on a Message from the user of the motor.

  In the process template itself, I put in place a "ProcessModelPostStep" (the purple one) reminder so that after all the steps of the calling sequence file I increment an internal counter and send these data as well as the Message of the user.

  The only missing part is to know how to calculate the TOTAL number of steps in the sequence file calling.  I can get the total number of SEQUENCES defined in the calling file but I how to recursively on each sequence loop excluded from top down by counting all the steps of the sequence of the callee.

  Appreciate any help in getting this last piece in place.

  Thank you!

  I have a better solution in the images below.  The code snippet is the code called by TestStand to introduce recursion.

  The attached code is the recursive call.  It is similar to my first post, but the fixed a bug with the cast of references.

  This should get the total number of step.  The code works under some assumptions:

  1. all called sequences are in the same file in sequence.  (You can add steps to also get the path to the movie file and retrieves the sequence from there.)

  2. There is no asynchronous LabVIEW step in TestStand.  (These are treated as sequence calls into the API, and you must add code to sort.)

  

  Pulido Technologies LLC

• Launch by programming a sequence file don't switch for execution in the user interface

  TestStand 4.2

  LabVIEW 2009

  Windows Vista Business 32-bit

  My movie file uses a SequenceFileLoad reminder to start his own execution automatically by using the entry point TestUUTs. This is accomplished by calling the Engine.NewExecution method. The problem I have is that my custom LabVIEW user interface does not switch to the view of execution when execution begins. If I manually start the execution using the TestUUTs key, the point of view of execution is displayed.

  In my interface user, changing the display of the sequence at the sight of the execution is done in the event callback, DisplayExecution, and the StartExecution event reminder. I also tried the ExecutionChanged event reminder, but realized that it did not apply in this case. The complex UI that comes with TestStand works correctly and, as far as I know, I use the same event reminders to manage change in my user interface.

  Any ideas? What Miss me?

  Thank you

  Toby

  CLD, CTD

  I realized what was going on. I was to switch it on the SequenceView using the ExecutionClosed callback, but was not checking the number of executions that have been opened. Opening my file of sequence autolaunching would open two executions, one to open the file and the actual execution of the file. As soon as the file has been opened, the first run was closing my UI to return to the display of the trigger sequence. Execution else had already begun the execution of the sequence file so he would continue to run in view of the execution, but I didn't see it.

  I now use ApplicationManager.Executions.Count and only to switch back to the SequenceView if it was not open execution.

• Sequence file unload the runtime starts and remains in memory through executions reference

  Hello!

  I am facing a problem using a dynamic movie file loading.

  Here's how my request: I'm testing the products on two sockets of different test so I use (a measure) parallel processModel.

  When lauching a test on one or another location of test, I still have the same trial customer template (MyProcessModelClient) in which I wrote a PreUUT call as usual. In this PreUUT custom, I get the serial number of a product, and according to this number I am a sequence of test script file and saving it (TestSequence_1.seq if it's on the test Socket 1) and TestSequence_2.seq if it is on the other.

  Then, in the MainSequence of 'MyProcessModelClient', I have a single sequence call TestSequence_1/2.seq dynamically according to the socket (TestSocket.MyIndex + 1). This calling sequence is then defined with:

  • option to load: dynamically load
  • unloading option: unload after executing the step

  And here's the trouble!

  First, the code stored in my "SequenceFileUnload" of TestSequence_x sequence reminder runs when the file is loaded... (I guess this one is loaded, copied in memory and unloaded right after...)

  Then what PreUUT reading for the next product on the same sockets of test generates an error in my script code tries to save the new file TestSequence_x (error-17206: '... a file of sequence with this path is already loaded "")!

  No idea why he acts like that?

  I don't know why you see the behavior that you describe and I'm unable to reproduce with a simple example (that I have attached). A few comments/suggestions:

  1. Make sure that you call Engine.ReleaseSequenceFileEx after that you create and save the movie file in PreUUT.
  2. The unloading of movie file callback will be called when you release the sequence file after you save it in the PreUUT because you release the last reference to this file in sequence.
  3. Make sure that you set the OptimizeNonReentrantCalls false on the sequence that you call in the TestSequence_x.seq.

  -Erik

• Programmatically, add password password cache

  Hello

  Is it possible to programmatically add a password in the password cache? My generation process requires some passwords vi to be known. Because the generation takes some time, I would like to put at the top so that the construction can run away without user interaction.

  Any ideas?

  Hi Xerxess,

  You can use the invoke node 'set lockstate. There is also a private method "Pwd.Add in Cache.

  Mike