NavigatetoURL AS3 question

Similar Questions

• Basic AS3 Question

  Hi to everyone.

  Why does ActionScript 3 must be on keyframes and not in the object I'm working?

  Thank you...

  AS2 should have been only on managers too much than to put code in various places is bad style. AS3 is just good behavior of coding.

• variable and as3 question text

  Hello

  I have three vars:

  var textMessage1 = "Text 1";

  var textMessage2 = "Text 2";

  var textMessage3 = "Text 3";

  I have an another var that increases it's the value by one whenever I run across a particular setting:

  nextText = 1;

  I have a text box - textBox - I want to display 'Text 1' if nextText = 1, or "text 2" If nextText = 2. "

  I can't get the TextBox to display what I want (it is formatted and everything has been set up to properly, of type textBox.text = "blah", shows "blah".)

  This is incorrect, but how do I display - textBox.text = [text + nextText];  ?

  I tried textBox.text = ['text' + nextText]]; but I'm told there is no such variable as text message, it's true.

  I tried different versions of the above, but I don't have this right - of ideas how to?

  Thank you

  Shaun

  use:

  var tl:MovieClip =;

  var textMessage1 = "Text 1";

  var textMessage2 = "Text 2";

  var textMessage3 = "Text 3";

  textBox.text = tl ["text" + nextText];

• Noob to AS3, Question

  Of course I don't expect anyone to write all this for me, I just need a point in the right direction. If someone could just help me start and explain how I could do this, I would be very happy.

  I have little programming experience (but I understand the fundamental principles), and I'm working on a project in Flash CS5. I put it in place where there are 16 text boxes and a 'play' button. When you press play, the Flash file should check the text box and check if one of about 10 different text strings is present. If so, it must issue a sound signal according to what channel is present. Then, he must wait a second, go to the next text box and do the same thing, and so on for each text box. Each text box would be check the same different channels, and each channel would correspond to a single sound.

  I'm sure it's really simple, but I'm really new on this. Thank you!

  the sounds should be in your library and have an assigned class.  If you load sounds there is a delay caused by the loading file which will cause problems with your timing.

• Dynamic (lazy) loading the source .as

  I know that this is probably a pure AS3 question, but the purpose is related to the PlayBook I ask here.

  Is it possible to code ActionScript3 'lazy-load "?  (It would be like what you would call a dynamic linking of libraries, rather than statically linking).

  In the Python world, the 'import' statements are indeed true statements, transformed the runtime load (and even on the fly compilation if necessary) other modules.  You can even put 'import' inside functions, so that they will be run well after the loaded application, even by only if you call a function that is rarely used.

  Is this also possible with AS3?  (I confess that I have not yet tried to 'import' in a function.)  If it is, it works the same way, where any code is not yet loaded from the file SWF (or wherever he may be) until the import statement execution?

  A use case would be to allow a very wide application start execution, perhaps display a custom splash screen, as it continues loading the modules "in the background".  They have alluded to this in a few videos (first WebWorks webcast?) where they mentioned that the image of custom in the file of your blackberry - splash screen tablet.xml "could even be integrated into the application.  That makes no sense to me, unless there is a form any lazy loading were available.

  You can use the Modules for this to dyanmically load views, code, services, what ever.  Unless she changed, imports are included during the compilation step not the enforcement stage (However, I was wrong once before).

• "Shading" packages qnx.*

  A different PlayBook related but effectively generic AS3 question for the experts:

  Is this possible in ActionScript3 of components of "shadow" in the standard namespaces?  I use the term "shadow" in the sense of "replace/overwrite with another with the same name and signature, so all calls to the original go to the replacement.

  This is entirely feasible and common for the purposes of testing in the Python world, because everything is dynamic.  You can replace, for example, the "time.sleep ()' by your own function, so that any code (your own, or even the code of the standard library) time.sleep () of appeals (which normally blocks for the specified number of seconds) to go to your function instead, which can do whatever, including return instantly, or changing the duration of sleep etc.

  If it was possible in AS3, I imagine it would be quite possible to create a library of qnx.* of replacement for some of the elements that are not supported out of the Simulator.  Things like qnx.pps.PPSChannel, for example...

  Does anyone know if this is possible and if yes, how would you do?  (I suspect that it is not possible for some reason any, because if it were then I think we would see a person having already and by releasing the package in open source.)

  Peter,

  There are a few options but without the source of its pretty much a shot in the water. I have advanced and tried a method and it worked for the classes that the error because of the PPSChannel. Basically, I added a qnx.pps.PPSChannel class for my project and did nothing then the error would go far.

  Again, this will affect the functionality of QNX classes but it gives you at least the possibility to give the page/interface design user on the desktop instead of publish a bunch of times on the Simulator.

  Here's the full entry on how do:

  http://Renaun.com/blog/2011/02/workaround-for-ppschannel-error-when-running-QNX-PlayBook-specific-AP...

• Multiple URLS in a Flash video

  Good afternoon

  I created a Flash video that contains three images that fade in and out between them. The problem I have is that I want the user to be able to click on an image and get directed to a specific URL. Each of the three images has a different destination URL. I'm new to Flash and have not been able to find a solution anywhere. Any help will be GREATLY appreciated. I use Flash Professional CS5.

  Thanks in advance

  It's not that you can't do something like that with a .flv, but you always end up doing some video clips to provide interactivity. By incorporating "cue points" in the .flv, you could start a movieclip (an invisible button) to appear when an image is displayed on top of the .flv. This movieclip would serve as a button with an onRelease (AS2) getURL or navigateToURL (AS3). All this is compiled into a .swf in all cases... but using the .flv complicates things a bit.

  To skip using a .flv, just a .swf, transform each image into a movieclip (be sure that every one of them get an instance name) and in your layer actions in the main scenario assigns these actions (AS2) getURL or navigateToURL (AS3) to each movieclip (the image).

  navigateToURL:

  http://www.republicofcode.com/Tutorials/Flash/as3link/

  How to create a clip:

  http://www.heaveninteractive.com/2008/03/03/working-with-movie-clips-in-ActionScript-30/

  Good luck on your project!

  Adninjastrator

• How to create a website in flash with multiple URLS?

  I'm not great flash and do a site that has a few different tabs for different pages.  How to make the different URLS for each page?  I want to follow each page separately.

  Thank you.

  Use (as2) getURL() or navigateToURL() (as3).

• XML and film of multiple images

  A Flash AS3 question:

  If you import an XML file into frame 1 of a multiple image film. Is the accessible XML in other than farmed frames 1 (say 20 frame)?

  Thank you

  It is accessible from anywhere (using the correct path) anytime AFTER loading is complete.

• a script is required

  Hello

  I need to feel this table with the sign ' # ' in a certain place, showing with an interpolation of nice. I need to pass each one in a different context in a number. 100 ' # ' round in a 100 numbers in autour 5-7 seconds I was trying to #_mc symbol mc_anim_ # for interpolation and but I can't configure each of them to a different cause of bolting the symbol is the same one so I'm im sure not right to do and should be done by a script that im not if fermiliar with still.

  any ideas guys?

  Thank you.

  

  You are welcome.

  Post your as3 question in the forum of as3 and explain what you want.

  p.s. Please mark this thread as answered.

• Scrolling banner: possible hyperlinks?

  Hello

  I am very new to flash, but a friend of mine wants a Web page with a scrolling banner and I felt obliged to try.

  I showed me this fantastice site: http://www.kirupa.com/developer/flash5/imagescroll.htm by someone on this forum.

  and that's what I need, with the exception of hyperlinks...

  I want to replace the scrolling image cloud by a series of photos of the same height, but each image must have a hyperlink

  in it. For example, when you click on to, it should be a redirect to a Web page.

  Is this possible? I didn't need to know all the details on the 'how', I'm going to try it myself, but some advice would be very appreciated.

  So:

  1. this scrolling banner can contain images that contain hyperlinks?

  2. If so, can you give me some advice on how to accomplisch this?

  Thank you very much!

  Erik

  Yes, it can be done.

  make each photo a movieclip and give it an instance (image1, image2, let's say) and use the (as2) getURL or navigateToURL (as3) for your hyperlinks function.  for example (as2):

  {image1.onRelease = Function ()}

  getURL ("http://www.adobe.com");

  }

  {image2.onRelease = Function ()}

  getURL ("http://www.flash.com");

  }

• AS3 navigateToURL() v QNXStageWebView

  I want to send a user to an external webpage for my application, can I use / rely on the AS3 navigateToURL to open the native or what browser should I use QNXStageWebView in my application?

  :-)

  Able to identify an Adobe platform evangelist tonight, apparently using navigateToURL() is supposed to work to launch a URL on the native browser, but until the browser is in the Simulator, nothing has been officially confirmed to Adobe (or they are just to play safe and do not give a clear answer:-P)

  :-(

• Question of closure of AS3

  I just started to use the closure in AS3 recently and I have a lot to learn. Here's the question. This is a loop that puts 5 balls one above the other on the stage. So far so good. However, I would like to create a situation when clicking on a button, the bottom ball is removed, and then each ball take the place of the ball below one by one, this continues for each click, until all balls have disappeared. .  I created this situation with add/remove child and I thought it might be more effective with a loop. I don't know how to access the balls because I don't have the instance name or class name can I refer too.

  var ball: gBall4M;

  var i: number;

  for (i = 0; i < 5; i ++) {}

  Prom = new gBall4M();

  ball.x = 331.30.

  ball.y = 25 + i * 17

  addChild (ball);

  }

  function release2Ball2(event: MouseEvent): void {}

  }

  using a table is a common way to keep a reference to the object ball.

  var ball: gBall4M;

  var i: number;

  var ballA: Array = [];
  

  for (i = 0; i< 5;="" i++)="">

  Prom = new gBall4M();

  ball.x = 331.30.

  ball.y = 25 + i * 17

  addChild (ball);

  ballA.push (ball);
  

  }

  function release2Ball2(event: MouseEvent): void {}

  {if(ballA.Length>0)}
  

   Ball = ballA .pop ();

  removeChild (ball);

  Prom = null

  for (i = 0; i<>

  ballA [i] = 17 there;

  }

  }

  }

• Question of FlashBuilder and Flash AS3

  I'm heads down working with the tool, FlashBuilder that is heavy AS3 and Flash CSx have used it for years.

  My question: I guess my AS3 skills that I have developed with FlashBuilder will be directly applicable to Flash CSx, correct? I understand that I will need the context of the application of my AS3 code for Flash objects when you work in Flash CSx, but most of the time my skills AS3 ship from FlashBuilder for Flash CS4/5?

  Thanks in advance,

  Rich

  Skills and knowledge of AS3 has nothing to do with editors in Chief/IDE (including CSx, FlashBuilder, etc.) itself. So once you get your hands on AS3 - no matter where you write your code - it will work the same way in the final compiled swf. However, there is a learning curve involved when getting to know the new software as with any new development environment.

• question of addChild in AS3

  It is an easy question.

  I can't figure out how to set "relativeTo" and "position" when you use addChild in AS3. I understand how to do it in MXML.

  So, how would I write this in AS3:

  < relativeTo = "{v1}" mx:AddChild >

        <mx:Button id="button1"/>
    </mx:AddChild>

  Thank you.

  -Laxmidi

  Code snippet and the page to answer the question:

  Configure the AddChild for the LinkButton class.
  lb = new LinkButton();
  lb.label = "back at the Login ';
  lb.addEventListener ("click", newLBClick);
  newLinkButton = new AddChild();
  newLinkButton.relativeTo = spacer1;
  newLinkButton.position = "before";
  newLinkButton.target = lb;

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=using_states_3.html

  If this post answers your question or assistance, please mark it as such.