Navigation 'Jump to slide' lost in him copy / paste

Similar Questions

• I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  For later use, it happened because your fields have the same field name, and fields with the same name automatically have the same value.

  So all you had to do was so each had a unique name and it would have worked, but using the command create several fields is preferable because it renames the fields for rename you them.

• Problem with him copy / paste

  Hello

  I had problem with copy (or cut) and paste the object from one layer to another. I want to cut the object and paste it into another layer... but I can't. For some reason any after update I can paste items only on the layer where I copy from. Even if the layer is locked. I can't work with this. Does anyone have similar problem? Thank you.

  Sergey,

  Uncheck the paste remembers layers in the layers flyout/list drop-down palette.

• How we prevent DW to rename shapes on him copy / paste?

  Is there a way to prevent DW to rename the fields in the form of "entry" to the "input2" wheneven you copy and paste.  When I move the form around fields, always happens, and it is more than useful disruptful.  I must have been half a dozen times looking for a way to avoid this via preferences.  It escapes me?

  Thank you

  Brian

  Dreamweaver CS4

  Is there a way to prevent DW to rename the fields in the form of "entry" to the "input2" wheneven you copy and paste.

  Dreamweaver CS4

  It's in the category of Code rewriting preferences: "Rename form items when pasting.

  HTH,

  Randy

• Copy / paste does not not under Vista

  I use the piece of garbage called Vista Home edition.

  Microsoft can't even their own system to work. They may not even recognize their OWN identification numbers when I go to get help.

  What kind of society.

  Copy and paste it on Vista Home edition does not work and has not worked for a long time.

  Any ideas how to operate?

  If your cam to pre-installed operating system OEM may be responsible for your assistance and not Microsoft support?

  What ID product fails to be recognized?   There is a time limit on how long Online Support is available to you the spirit, to get the thing to work seems to involve jumping through hoops in my opinion.   Some things you have to do is to add sites to the IE Trusted Sites, allow ActiveX to run and possibly start IE by right clicking and selecting the option 'run as administrator '.  Even in this case it can be successful, I am yet to find someone who contacted Microsoft through their online Support successfully, I suppose it should work, otherwise the person at the end of the right Microsoft got a real cushy job.

  Microsoft Technical Support phone numbers
  http://support.Microsoft.com/kb/319726/en-us

  Microsoft U.S. Office locations
  http://www.Microsoft.com/about/companyinformation/usaoffices/en/us/default.aspx

  Online Assisted Support options
  http://support.Microsoft.com/select/default.aspx?target=assistance

  Microsoft contact information - Is supported by the phone number, Email
  http://support.Microsoft.com/GP/phonelist#phone

  Upgrade to Windows 7, Office Small Business has lost
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/75af1220-321b-48A2-990c-4297ed0647cd

  What's the problem with him copy / paste?  Drag and drop work for you?  Have you tested with another mouse?  They work if you log Mode without failure or creates another user in Normal Mode?

  Vista Advanced Boot Options (or 7)
  http://Techblissonline.com/Vista-advanced-boot-options/

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Take a look through some of the similar posts on toward the right in 'related topics '.

  Help please! I can't use the copy & paste!
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/e04cc6b7-cb95-4e24-b69f-5857eb3fea01

  Not possible to paste pictures of MS Word for widows Mail?
  http://www.Vistax64.com/Vista-mail/116614-not-possible-paste-pictures-MS-Word-widows-mail.html

  No shortcuts keyboard Ctlr C then Ctrl V or Ctrl X then Ctrl V work?

• Jump to slide into a new project

  Is there a way I can jump to a specific slide in a project, instead of jumping to the first slide of the project, a different project.

  Currently at the end of this project, there is an opportunity to examine certain areas by the first. These areas begin to slide13. When the computer reboots, it currently jumps to slide 1.

  Any help would be great

  thedarf

  Hi all

  Good, way cool solution here. RJ Jacquez sent a tweet there, indicating he was post a solution to this two Friday. Unfortunately, I missed to see the result, but has managed to find it today. (I was busy to facilitate a class last week)

  The good news is that it can be done! I just downloaded the example and it works. And it is not too difficult to achieve.

  Note that you must have 4 Captivate to do it, because it relies on a programming tip Action.

  So here's how it works.

  In the film Captivate you are willing to open up to another slide, you create an advanced Action. (Click Project > Actions... > Advanced actions)

  Click the menu drop down and choose 'create a new action... '. »

  Type a name for the action.

  Click on the area of statement add to place the focus.

  Press the space bar. (Statement should appear and should turn red)

  Press the space bar again and a drop down menu should appear.

  Choose the Standard Action.

  Choose the action run JavaScript.

  Copy the script below and paste it into the box where you type the script.

  If (Window.Location.href.IndexOf("?) (Slide"! = 1) {var window.location.href.substring = slideNumber (window.location.href.indexOf ("? "))} slide ") + 7);" var cp = document.getElementById ("Captivate"); cp.cpSetValue ("cpCmndGotoSlide", slideNumber-1); CP.CP SetValue("rdcmndResume",1) ;}

  Click Save.

  Click Close.

  Modify the slides in the project.

  In the properties of the slide, select Execute advanced action action "on slide enter."

  Take credit for your action.

  

  Now, you post this possibility.

  By a Captivate movie that wants to open this movie to maybe put on 3, you program the button or box click before it opens the HTML of the other Captivate movie file and provides the number of the slide as a parameter.

  The example below shows slidejump.htm? = 3 slide

  

  Hope this helps... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Info on system - jump to slide using the variable Variables

  I know this is not new - I just couldn't find it there.  I use Cap 8.  I need to do a lot of branching in this project.  I would like to move to a slide by using a variable.  It seems I should use cpCmndNextSlide, but I was not able to find a good resource that speaks of these variables and examples of their use.

  For example, in a fast action I would set the system variable to the slide that I want to go?  And if so, how can I do the draft Act on that and actually go to that slide.  I couldn't get that to work.  I wish sliding jumping allowed you to put in a variable in a tip action.

  Anyone who can point me in the right direction?  It would be greatly appreciated!

  I am so happy that I did a few tests, because it seems that it was something small and ridiculous.  I think that (so far) it seems that I was not overview of the entire project that I started about three slides with overview because those who were intro slides and does not part of the action.  I don't think it would make a difference in the jump to slides with cpCmndGotoSlide, but this seems to be the case.  Anyone who knows?  I will continue with the development, but I think that's it.

• Jump to Slide Audio Incorrect reading

  I am using Captivate Version 8.

  I have a button on the slide #7. This button actions are defined to access the slide #5. When I saw the project and click on this button, it jumps to the #5 slide, but it plays audio from slide #4. From the audio of a minute, he plays the audio OK slide #5.

  I tried to create an advanced action which would jump to slide #5 and audio triggered stop. This has not fixed my problem.

  Any suggestion would be appreciated.

  Thank you!

  Make sure that the clips audio on slides 4 and 5 do not touch the beginning or end of the timeline on the slides.  If the audio is difficult against the ends of the timeline, then Captivate sometimes "assemble" audio clips.  You want them to be separated.

• Click boxes don't "jump to slide'on my PC, but on another PC."

  It's so frustrating.  I created a course in CP4.  On my PC, when before viewing the file .cp or looking at the published .swf or .htm files, some boxes to click has 1/2 features: they are set on "" multiple action: display a check mark and go to a slide '; " but they show only a checkbox.

  There are 8 squares click slide 3.  2 of them works perfectly - they show their checkmarks and jump to slides 4 and 5, respectively.  The rest of them show only the box to tick and don't move to their respective slides (slide 6, 7, etc.).

  In addition to this, when my colleague takes my .cp file and publish it, click areas ALL work very well for her.  What it means?

  I tried deleting my Captivate_40.dat file reset.  What can I do else?  It seems to be a file number... other courses seems to work very well.

  Hello

  If you have an object has received, you have created a quiz even if it's an informal

  Lilybiri

• Jump to slide custom Nav

  So I know there is the famous rdcmndNextSlide = 1 to skip ahead 1 slide, and the respective command to jump backwards a slide. But whenever I try, I can't it jumps to a specific slide, in this case number 52.
  
  I tired rdcmndNextSlide = 52, no luck any other thing either. There is a jump to slide that can be assigned to a button, the shutter must be somewhere.
  
  Anyone?
  
  Thank you

  I forgot to mention that this example moves to the slide 4 (3) in a 0-based array, change the number to their own purposes.

• Do not jump to slide the button

  Hello
  
  I have a slide (slide 2), which has four buttons on it. The first jump to slide 3 of my project and works very well. The second opens a word document and still works very well. The third takes me to the sliding 42 - the beginning of a quiz and working properly. The fourth button take me to slide 51, but when I click on it after the publication, it doesn't take me anywhere. I checked if there's just a delay and there seems not to be. Interestingly, if I view the project in the order, then I can display a slide 51 - by clicking on the button works once the previous slides have been consulted.
  
  I checked the button is directed to the correct slide, and nothing seems to be different with this button the previous keys that work properly.
  
  Anyone has any ideas, what I might be missing?
  
  Thank you very much
  
  Becky

  Hi Becky

  In addition to what CatBandit offered, I would also add this another thought zany.

  The whole issue could be associated to the fact that your quiz starts on slide 42. If you have configured the Captivate for the quiz must be answered in order to proceed, it probably is not allowing you breeze past slide 42 on slide 51 because a response has not yet provided to slide 42.

  Look at your preferences of Quiz and see what that parameters are here. If you see "Necessary - the user must take the quiz to continue" I guess this is your culprit.

  See you soon... Rick

• Click on the box - jump to slide

  At the end of the lesson, I want the user to have the option to try again or go to the next lesson.
  
  I've added two boxes click to slide 14, the value 'success - jump to slide' "Slide - 6" and another set "success - go to the next slide.
  
  However, in preview, when I click on the box that is supposed to go to slide 6, it goes to slide 13.
  
  Any ideas? Thank you.
  
  

  Hello
  Another thing to consider. If you are previewing 'from this slide"or" next 5 slides "Captivate back to sixth in the preview will not slip the sixth blade in the project. If you are seen in this way, only concerned, 13 slide is slide 6. Try the Preview "of the project" or "browser" and see if it works.
  HTH,
  Peter

• Copy past Photos in the Newsroom and lost photo EXIF data

  Mac Pro OS X El Capitan to 10.11.6 and Photos Version 1.5 (370.42.0)

  Question: when I do a copy paste a photo of Photos to my mac desktop, the copy is made, but I lose the photo information (EXIF data) and especially the date that the photo was taken. I need this date to filter all my photos and then rename them all directly in the Finder.

  Thanks for your advice

  That's right (copy / paste Gets an overview of average quality without metadata updates)-the proper way is to export the photos (menu, file == > export) checking metadata fields you want to include

  LN

• No copy/paste with VMWare 6.0.2 (on the Mavericks 10.9.2) of the Snow Leopard Server 10.6.8?

  I'm running the free demo for 30 days of VMware. Will buy if working copy (of the text).

  Everything else is remarkable!

  I checked the 'preference enable Mac OS keyboard shortcuts host.

  I restarted the emulated system.

  I can't copy and paste to work.

  I see that others seem to have 'lost' copy/paste when the upgrade to the Mavericks 10.9.2 (which I have),

  or upgraded their VMWare to 6.0.2 (which is all I ever had).

  Although I bypassed the Mavericks, as well as the Lion and Mountain Lion; jump directly from 10.6.8 to 10.9.2.

  I guess the free version of VMware of full of features and has not paralyzed cut / paste.

  No idea what could be the problem?

  What you download is fully functional version that technically it is there no trial version!  The only thing different between what you downloaded and what is bought is the license.

  Have you installed VMware Tools in the comments?

  What VMware Fusion 6.0.3 is available for download, you can always try this one.

• Impossible to copy/paste or drag/drop of files. Cannot copy and paste text, either.

  The operating system would prohibit me files copy/paste and drag and drop files text copy and paste all of a sudden. No error message; the right operating system does not respond to my 'stick' and 'slide' actions; 'paste' is grayed out in the menu. ('Copy' seems to be black if I remember correctly).

  Need to reboot back to normal. A reboot about once a day because of this problem frequently.

  P.S. The computer seems to be slower than usual these days. kernal_task and Google Chrome Helper often go beyond 100% of the CPU in the activity monitor. My MBP has a 480 GB SSD (with use of 180 GB).

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System