U530 Touchpad is not responding

Similar Questions

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed

• Smartphones blackBerry my touchpad is not responding

  hyee he... I really need help now on my touch pad for blackberry...

  How to fix the keypad that gives no answer when I reboot...

  (1) when I reboot my blackberry my touchpad won't move up down and left to right... [When I click on the touchpad... his is not also just stuck respond.it..]

  (2) I have reboot for many times, but he gives no answer to the pavement...

  Please give me help... I really really need right now...

  Hello

  In my last post I said that even if it works, it could be a temporary solution... normally this solution works for a few hours or even days, depending on the State of the trackpad... sry, it has not worked for you... If you wish, you can repeat the process again, but the best would be to get your trackpad replaced as soon as POSSIBLE...

• Pavilion DV7 the touchpad buttons not responding

  My new dv7 (select edition, windows 7-64 b) knows a few difficulties, right click. When I connect the USB mouse with buttons right and left I can right click but areas to the left and make touchpad a right-click differ at all. When I type in the box to right click, he left snaps; When I type in the box to left click, it left clicks. When I tap anywhere on the pad, he left clicks. I installed the latest synaptic drivers, the device properties window tells me that I am using synaptic clickpad V7.4. The tab buttons has a right click button Setup do secondary clicks and all the listening and the buttons are enabled, but still no right click. Looking at some pages of support on the hp website (http://support.hp.com/us-en/document/c00678194), I noticed that the screenshot they show from the menu 'tapping' seems different from what I have on my computer. Namely, that i miss the section "tap zones".

  If anyone can shed some light on this mystery, I would be very grateful.

  -Sam

  To start with you are tapping on right click area or pushing down? new touchpad on laptop new HP design is this button clicks are now integrated into the touchpad itself, but you will still need to make a physical click. Typing in the box click it will operate as a left click as it would activities tap the touchpad function...

• y510p touchpad does not respond when you hold down a key on the keyboard

  Assuming that there is a setting to change this. At least I hope so. Synaptics. y510p

  Verification of Palm has been renamed Smart Sense in the latest drivers, had put at least.

• Dell place 11 Pro keyboard - touchpad does not

  touchpad does not now

  has worked for 2 months - then stopped working

  noticed 'urgent' download for touchpad on dell driver support page - downloaded and installed

  still does not

  pls advise

  I actually found a way how to solve this problem. Tried above all, disconnect battery, registry fixes and etc... In all cases at some point touchpad become unresponsible. But what I found accidentally - while the touchpad is not respond to gestures and does not move a cursor - function click on the touchpad still works. in any case, this close to me do not have a solution.

  As always, the solution is just magic - all you need to do to restore a bloody thing - is to run SynaUtilitySfx.exe, while the Tablet is connected to the keyboard. The utility will fail saying that the touchscreen device not found - but this will allow touchscreen and a touchpad. Despite I'm an IT professional - I can't explain what is happening, but this method has worked for me.

  I disconnected the keyboard shelf and set the keyboard on the charge, which immediately ruined the touchpad when I connected the keyboard for Tablet. I ran new SynaUtilitySfx.exe - all work. A few times to prove: it does not fix the bloody thing!

  You can get SynaUtilitySfx.exe stuff from the dell Web site, they call it Panel Touch Firmware on Dell place 11 Pro 5130.

• Equium A100-027 touchpad not responding

  I have an equium a100-027 and today the touchpad was funny.
  For example, I went to move and sometimes it wouldn't be no move, moved very little, or when he moved quickly moved to around to the same place that it was before.

  I assumed that maybe it's just that my computer has been used too much memory or something. But then later, it no longer responds. I restarted my computer and the same problem, it does not move.

  Before anyone suggests, I in fact checked all the settings for it. I know there is a shortcut (fn + f9) to turn it off.
  However, I already checked and it is activated.
  I am falling quickly with this computer, six months old and already had two problems with it.

  Anyone can suggest a way to solve this problem, or should he be returned to be repaired?

  If it must be returned, how should I do this?
  I bought of Dixons, and when I came down to them with my last number, they said they have no responsibility and I had to call "the tech guy".

  This ended up being A £1.50 tech support number overcharge, which I'm not call again.
  This laptop has only 6 months, clearly under warranty. I don't have to pay who knows how much on a phone call just to get it fixed.

  Sorry if this sounds like a hangover, just in a bad mood with this computer at the minute.
  Thanks for any help! =-)

  Hello

  I see that you're desperate. Sorry to hear this story.
  But before you send this laptop to any point of service, you must reinstall the laptop with the Toshiba Recovery CD.

  This procedure will put the laptop to factory settings!

  If the touchpad does not work after reinstalling new contact ASP in your country.
  The service provider authorized in your country will be able to help you and if your warranty is valid, everything must be done for free.

  I can't believe that the appeal could cost about £1.5 because it s a common phone number.

  If you want to find the ASP please check this:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• My keyboard and the touchpad are locked, does not respond to what it is.

  My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

  Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

• HP Envy dv4 Notebook PC Touchpad not responding

  Hello

  All of a sudden I lost my touchpad. It is no longer allows her to follow my mouse movements. The power toggle button touchpad seems not too much work. I can't turn or no more. I rebooted my system a couple of times with no result. Also tried to uninstall Synaptics Pointing Device Driver and later installation of the latest version without any positive impact. Will be great if you happen to have any suggestions.

  Hello

  It is always interesting to try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• HP 250 g4 laptop: Caps lock key flashes and touchpad not responding

  I need help... caps off button continues to blink or its blinks for a while then it stops and I type capital and common errors of letters in the second place, the touchpad does not when the caps lock key. And it's really frustrating as. ..

  He worked for two days and it's the same problems that happened again

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• Recovery of the Internet and the Touchpad does not

  Hi all!

  I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

  Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

  The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

  Thanks to anyone who responds!

  Start up your Mac in Mode without failure.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  
  

  Then start while pressing the command + R keys to access internet recovery to restore the OS X.

  Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

  to reformat and restore the OS X.

  On Safe Mode

• 19 satellite C50-A-t - Touchpad does not

  Hello world
  I have a Satellite C50-A-19 t and I don't know why my touchpad don't respond often. This happens several times and is boring... How can I resolve this you problem?

  Thank you

  This should not be a touchpad issue.
  Test the same functionality as part of the external USB mouse.
  In many cases, the cursor would not respond because the system stressed.
  In the case of the background process stress and burden the CPU, the touchpad or mouse couldn't answer.

  But it's one of the possible reasons.

  Another reason for this problem could be the problem of the touchpad driver.
  This would require an update or the new installation of the touchpad driver.
  Usually the latest Synaptics driver is downloadable from the page of the Toshiba UE driver, but you might also try a newer version of Synaptics page:
  http://www.Synaptics.com/resources/drivers

• Equium A100-27-Flash cards not responding do not

  I have a problem with flash cards not responding is not on my laptop Satellite A100-27.
  It has been gradually getting worse for several months, period during which Windows would warn me that "Toshiba Flash Cards not responding' and invite me to look for a solution and close the program.

  This always solved the problem, but recently flash cards work while I can not, for example turn the touchpad on or off, but Windows is no longer notifying me and looking for a solution.
  The problem seems to be entirely circular, because Microsoft doesn't want to know if you bought your computer with the operating system already installed (why? Maybe they can't afford good customer!) and Toshiba offer no way at all to communicate with them directly, except at a prohibitive cost.

  I'm the only person in the world to conclude that this appalling lack of any significant customer support is a clear indication of an attitude "grass you--I'm only interested in sales and profit" and y at - it a kind soul out there that can offer the possibility of a solution?

  HI lacourtade,

  First of all keep cool!
  Why you get excited about this? These things can happen, person only and not portable is perfect. In addition, you have not tried anything yet and I think that your problem can be solved in a few minutes then listen:

  Flash cards you want to say are part of the package of added value. So you should try to reinstall the Toshiba tool and you can download the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version, remove the old first. Restart the computer, and then install the version you downloaded.

  Good luck! :)

• Keyboard and touchpad do not work on Satellite C870-13F

  I have a computer satellite C870-13th since August.

  Yesterday for no apparent reason, my touchpad has stopped working. (no, I didn't turn off)
  Not really bothered by it, I continued working on my computer for several hours.
  Find it me so that he might be a little bug, so I decided to restart my computer.

  When we turn back, not only my touchpad does not work, now nothing on my keyboard responded, not a single touch. I've updated the drivers, bios, done a virus scan, restored my computer for a few days before, nothing is.

  The strange thing is that the keyboard is always when I press F1 or F8, 0, enter, and arrow keys to get into the menus before windows starts.

  Help them, I used the toshiba recovery to restore the computer to factory settings.
  Despite all this, keyboard and touchpad are still pending.
  I don't really understand, because it works at startup may not be real materialistic damage!

  Now, I'm getting frustrated cause I have more solutions and tapping the screen with the keyboard is really slow! = p

  Any help?

  Hello

  I think that it s a bad material work because you have already tried the system recovery and the keyboard does not work even if you use the factory settings.

  But it would be interesting to know if the USB external keyboard would serve. You can test this? In my opinion if the external keyboard would work properly, then it would mean that your keyboard is faulty and must be replaced.
  I m wondering if the fault of the touchpad is related to failure of internal keyboard.

  However, I think that the guarantee must still be valid if you bought this unit in August. Then get in touch with service and guys should fix it for free!