Navigation / open declaration error

Similar Questions

• to DECLARE * ERROR at line 1: ORA-00900: invalid SQL statement

  This works fine when I use the System user to create a schema and then run this script.
  When I create another user with grant connect, resources, create view permissions I get this error:
  
  DECLARE
  *
  
  ERROR on line 1:
  ORA-00900: invalid SQL statement
  ORA-06512: at...
  
  
  DECLARE
  ID MY_TABLE.ID%TYPE;
  tNom my_table. % TABLENAME TYPE;
  PName MY_TABLE_TWO. PROPERTYNAME % TYPE;
  CURSOR c1 IS
  SELECT distinct evt.id, evt. TABLENAME, vid.propertyname
  FROM my_table evt, vid MY_TABLE_TWO
  WHERE the evt. COL_1 = 1
  AND evt. COL_2 = vid. COL_2
  and not exists (select facts FROM MY_TABLE_THREE 1)
  where evt.id = facts.eventid and facts.displayname = vid.propertyname);
  BEGIN
  OPEN c1;
  LOOP
  FETCH c1 INTO id, tNom, pname;
  OUTPUT WHEN c1% NOTFOUND;
  INSERT INTO MY_TABLE_THREE (ID, COLUMNLENGTH)
  VALUES (S_ANALYTICS_SEQUENCE.nextval, 255);
  RUN IMMEDIATELY 'ALTER TABLE ' | tNom | 'Add ' | PName | ' _ NVARCHAR2 (255);
  END LOOP;
  CLOSE c1;
  END;

  Hello

  Maybe missing a privilege. If I were you, I'll try this first:

  DECLARE
     id    MY_TABLE.ID%TYPE;
     tname MY_TABLE.TABLENAME%TYPE;
     pname MY_TABLE_TWO.PROPERTYNAME%TYPE;
     CURSOR c1 IS
        SELECT DISTINCT evt.id,
                        evt.TABLENAME,
                        vid.propertyname
          FROM MY_TABLE     evt,
               MY_TABLE_TWO vid
         WHERE evt.COL_1 = 1
           AND evt.COL_2 = vid.COL_2
           AND NOT EXISTS (SELECT 1
                  FROM MY_TABLE_THREE facts
                 WHERE evt.id = facts.eventid
                   AND facts.displayname = vid.propertyname);
  BEGIN
     OPEN c1;
     LOOP
        FETCH c1
           INTO id, tname, pname;
        EXIT WHEN c1%NOTFOUND;
        INSERT INTO MY_TABLE_THREE
           (ID,
            COLUMNLENGTH)
        VALUES
           (S_ANALYTICS_SEQUENCE.NEXTVAL,
            255);
        DBMS_OUTPUT.put_line('ALTER TABLE ' || tname || ' add ' || pname ||
                             '_ NVARCHAR2(255)');
        --EXECUTE IMMEDIATE 'ALTER TABLE ' || tname || ' add ' || pname || '_ NVARCHAR2(255)';
     END LOOP;
     CLOSE c1;
  EXCEPTION
     WHEN OTHERS THEN
        DBMS_OUTPUT.put_line(SQLERRM);
  END;
  /
  

  Using this approach, you can see the sentences to run without run, I also added an exception block.

  Kind regards

• Mozilla firefox 25.0 tab opens with error on URL res://ieframe.dll/unknownprotocol.htm#chrome-extension://kcnhkahnjcbndmmehfkdnkjomaanaooo/widget.html any idea?

  Mozilla firefox 25.0 tab opens with error on URL res://ieframe.dll/unknownprotocol.htm#chrome-extension://kcnhkahnjcbndmmehfkdnkjomaanaooo/widget.html any idea?

  In my view, it is an extension of google voice, but I don't have chrome installed on my PC

  Windows XP SP3 machine.

  Hello

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

  I hope this helps!

  Curtis

• OfficeJet pro 8610: open door error ADF

  The ADF begins to pull on a page then stops and says that there is a door open ADF error.  I don't see where this would be. This is the first time I've ever used the ADF, so I can't tell if it worked before or not.  The cover is not closed tight on the glass... which means that there is like a 1/4 "crack all around.  I put the weight down on it and tried again, but which did not help. Any suggestions?

  Hello @Idempke, greetings!

  Thanks for joining the HP Forums. I would like to help

  I understand that you are getting the error ADF door open on your printer. Try following the steps and check them out below:

  Make sure that the doors of the ADF are closed on both sides. Please check the picture below. The red part surrounded by a circle is the ADF door. You can open the door and close the door with little force.

  

  If the problem persists, try to unplug the printer from the power outlet when the printer is turned on. Wait 2 - 3 minutes then turn on the printer and check.

  Let me know how it goes

  See you soon

  Please click on "acceptable Solution" on the post that solves your problem to help others to find the solution. To show appreciation my help, please click "Thumbs Up icon" below!

• game of virtual villager of opening gives error code oxc8660160

  Vitrual village (games)

  I'll download the virtual villagers game and when I try and run it, it says Error failed to open oxc8660160 error code how can I fix? or whats wrong?

  Since this is the problem with the game, I suggest you contact the site already download you. You can also try to contact the game manufacturer and also it could be the problem with the installation file damaged.

• cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

  cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

  I just replaced my 9.5 Raw camera with Camera Raw 9.4, from this page:

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  It worked, now I'm back in business!

  PS. along the way, I installed Camera Raw 8.3 (manual drag-and - déposer), in response to advice on a pretty old thread, and that worked as well.

• Parameter required missing "in origin' to 'open' event - ERROR?

  what the hell does that mean? Happens when I double click ID some (but not all) of the files (or drag and drop them to anchor the icon). It displays the error and does not open the file. However by using file > open opens without error. (screenshot attached)

  I've upgraded to Snow Leopard Monday and began to experience this after the "upgrade". What is a problem for Adobe InDesign, or something with Snow Leopard.

  Thank you

  Get rid of the symbol # in the name of your file. It seems that OSX 10.6 is our feet to the fire with the UNIX file naming convention.

• The cursor declaration error

  Hi all, when I'm trying to declare a cursor in a procedure, I get errors. Please correct me where I'm wrong
  

    1  CREATE OR REPLACE PROCEDURE xxc_lc_rcv_interface_prc IS
    2      v_a    NUMBER;
    3      v_b    NUMBER;
    4      v_c    NUMBER;
    5      v_d    NUMBER;
    6      v_e    NUMBER;
    7      v_f    NUMBER;
    8      v_g    NUMBER;
    9   CURSOR rcv_interface_cur
   10   IS
   11   SELECT shipment_header_id INTO v_c
   12   FROM RCV_SHIPMENT_HEADERS
   13   WHERE SHIPMENT_NUM = 'NOV1124';
   14   SELECT shipment_line_id INTO v_d
   15   FROM RCV_SHIPMENT_LINES
   16   WHERE SHIPMENT_HEADER_ID = v_c;
   17   BEGIN
   18     SELECT rcv_headers_interface_s.nextval INTO v_a FROM dual ;
   19     SELECT rcv_interface_group_s.nextval INTO v_b FROM dual;
   20     SELECT rcv_headers_interface_s.currval INTO v_e FROM dual ;
   21     SELECT rcv_interface_groups_s.currval  INTO v_f FROM dual;
   22     SELECT rcv_transactions_interface_s.nextval INTO v_g FROM dual;
   23  BEGIN
   24  INSERT INTO rcv_headers_interface
   25  (
   26  HEADER_INTERFACE_ID,
   27  GROUP_ID,
   28  PROCESSING_STATUS_CODE,
   29  RECEIPT_SOURCE_CODE,
   30  TRANSACTION_TYPE,
   31  AUTO_TRANSACT_CODE,
   32  LAST_UPDATE_DATE,
   33  LAST_UPDATE_LOGIN,
   34  LAST_UPDATED_BY,
   35  CREATION_DATE,
   36  CREATED_BY,
   37  VALIDATION_FLAG,
   38  COMMENTS,
   39  SHIPMENT_NUM,
   40  FROM_ORGANIZATION_ID,
   41  SHIP_TO_ORGANIZATION_ID,
   42  EXPECTED_RECEIPT_DATE
   43  --RECEIPT_HEADER_ID
   44  )
   45  VALUES
   46   (v_a,                                         --Header Interface ID
   47   v_b,                                          --Group ID
   48   'PENDING',                                    --Processing Status Code
   49   'INVENTORY',                                  --Receipt source Code
   50   'RECEIVE',                                    --Transaction Type
   51   'DELIVER'  ,                                   --AUT Transact Code
   52   sysdate,                                       --last update date
   53   1053,                                         --last updated by
   54   1053,                                        --Last Update Login
   55   sysdate,                                      --creation date
   56   1053,                                         --created by
   57   'Y',                                          --Validation Flag
   58   'Receiving Through Interface',                --Comments
   59   'NOV1124' ,                                --Shipment Number
   60   81,                                           --From Org
   61   82,                                           --To org
   62   sysdate                                     --Expected Receipt Date
   63  );
   64  END;
   65   BEGIN
   66  FOR crec IN rcv_interface_cur loop
   67  INSERT INTO rcv_transactions_interface
   68  (
   69               HEADER_INTERFACE_ID,
   70               GROUP_ID,
   71               INTERFACE_TRANSACTION_ID,
   72               TRANSACTION_TYPE,
   73               TRANSACTION_DATE,
   74               PROCESSING_STATUS_CODE,
   75               PROCESSING_MODE_CODE,
   76               TRANSACTION_STATUS_CODE,
   77               CATEGORY_ID,
   78               QUANTITY,
   79               LAST_UPDATE_DATE,
   80               LAST_UPDATED_BY,
   81               CREATION_DATE,
   82               CREATED_BY,
   83               RECEIPT_SOURCE_CODE,
   84               DESTINATION_TYPE_CODE,
   85               AUTO_TRANSACT_CODE,
   86               SOURCE_DOCUMENT_CODE,
   87               UNIT_OF_MEASURE,
   88               INTERFACE_SOURCE_CODE,
   89               ITEM_ID,
   90               --ITEM_DESCRIPTION,
   91               UOM_CODE,
   92               EMPLOYEE_ID,
   93               SHIPMENT_HEADER_ID,
   94               TO_ORGANIZATION_ID,
   95               SUBINVENTORY,
   96               FROM_ORGANIZATION_ID,
   97               FROM_SUBINVENTORY,
   98               EXPECTED_RECEIPT_DATE,
   99               SHIPPED_DATE,
  100               VALIDATION_FLAG
  101  )
  102  VALUES
  103       (v_e,                                          --Header Interface ID
  104       v_f,                                          --Group ID
  105       v_g,                                           --Interface_transaction_id
  106       'RECEIVE',                                       --Transaction Type
  107       sysdate,                                      --Transaction Date
  108       'PENDING',                                    --Processing Status Code
  109       'BATCH',                                      --Processing Mode Code
  110       'PENDING',                                    --Transaction Status Code
  111       120,                                          --Category ID
  112       2,                                           --Quantity
  113       sysdate,                                     --last update date
  114       1053,                                        --last updated by
  115       sysdate,                                      --creation date
  116       1053,                                           --created by
  117       'INVENTORY',                                  --Receipt source Code
  118       'INVENTORY',                                  --Destination Type Code
  119       'DELIVER' ,                                    --AUTO Transact Code
  120       'INVENTORY',                                  --Source Document Code
  121        'Each',                                     --Unit Of Measure
  122        'RCV',                                       --Interface Source Code
  123        2492,                                        --Item ID
  124        --'ABBY KITCHEN CURTAIN SET BEIGE/BURGUNDY',   --Item Description
  125        'EA',                                       --UOM COde
  126        1053,                                       --User
  127       v_c,                                         --Shipment Header ID
  128        v_d,                                        --SHipment Line ID
  129        82,                                           --To Organization ID
  130        'Brooklyn',                                     --Sub Inventory ID
  131        81,                                            --From Organization
  132        'Vessel',                                      --From Subinventory
  133        sysdate,                                       --Expected Receipt Date
  134        sysdate,                                      --Shipped Date
  135        'Y'                                           --Validation Flag
  136      );
  137  --END IF;
  138  END LOOP;
  139  END;
  140*     END xxc_lc_rcv_interface_prc;
  SQL> /
  
  Warning: Procedure created with compilation errors.
  
  SQL> sho err
  Errors for PROCEDURE XXC_LC_RCV_INTERFACE_PRC:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  14/2     PLS-00103: Encountered the symbol "SELECT" when expecting one of
           the following:
           begin function pragma procedure subtype type <an identifier>
           <a double-quoted delimited-identifier> current cursor delete
           exists prior
           The symbol "begin" was substituted for "SELECT" to continue.
  
  141/0    PLS-00103: Encountered the symbol "end-of-file" when expecting
           one of the following:
           ( begin case declare end exception exit for goto if loop mod
           null pragma raise return select update while with
           <an identifier> <a double-quoted delimited-identifier>
           <a bind variable> << continue close current delete fetch lock
           insert open rollback savepoint set sql execute commit forall
           merge pipe purge

  Not before the CURSOR, but before the SELECT INTO after the cursor...

    CREATE OR REPLACE PROCEDURE xxc_lc_rcv_interface_prc IS
    2      v_a    NUMBER;
    3      v_b    NUMBER;
    4      v_c    NUMBER;
    5      v_d    NUMBER;
    6      v_e    NUMBER;
    7      v_f    NUMBER;
    8      v_g    NUMBER;
    9
   10   CURSOR rcv_interface_cur
   11   IS
   12   SELECT shipment_header_id INTO v_c
   13   FROM RCV_SHIPMENT_HEADERS
   14   WHERE SHIPMENT_NUM = 'NOV1124';
  
    
  
   15   SELECT shipment_line_id INTO v_d
   16   FROM RCV_SHIPMENT_LINES
   17   WHERE SHIPMENT_HEADER_ID = v_c;
   18     SELECT rcv_headers_interface_s.nextval INTO v_a FROM dual ;
   19     SELECT rcv_interface_group_s.nextval INTO v_b FROM dual;
   20     SELECT rcv_headers_interface_s.currval INTO v_e FROM dual ;
   21     SELECT rcv_interface_groups_s.currval  INTO v_f FROM dual;
   22     SELECT rcv_transactions_interface_s.nextval INTO v_g FROM dual;
  
   
  
   23  BEGIN
   ...
  

• Safari crashes on opening. Errors: Exception Type: EXC_BAD_ACCESS (SIGSEGV) of Exception Codes: KERN_INVALID_ADDRESS at 0 x 0000000000000023. I have already downloaded the last update: 9.1.3, flash removed, removed malicious software known with Malwarebyt

  Safari crashes on opening. The errors are:

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000023.

  I have already downloaded the last update: 9.1.3, flash removed, removed malicious software known with Malwarebytes. I would like to re - install the operating system, but I downloaded an upgrade initially and do not know what file name to look for to try to do more. I may or may not have a backup. If I do, are there instructions for this kind of restore somewhere?

  Thank you.

  Hello

  Can be an extension Safari or third party plugin that is causing Safari to unexpectedly stop then follow the instructions in this article to support > Safari: no support for third-party modules can cause Safari to suddenly quit, or have performance problems

• Firefox only opens - get error message "this operation has been cancalled due to restrictions in effect on this account... »

  I can't open firefox - everytime I try I get the above error message. It started after no apparent change or updates to my system, just a normal life stops. I tried to change the .htm, .html etc. register file names and reinstall as suggested, but it does not work. The only way I can open firefox after I reinstalled and it automatically launches a browser.

  I can open firefox in a new user account that suggests something has changed in the account that I usually use, but I have no idea what since I didn't do myself any changes and you see nothing that suggests that it blocks firefox to open. I ran a virus scan and it is to come clean.

  Does anyone have any suggestions? I would be very grateful for help.

  Thank you.

  Thank you both for your responses. I had tried all possible ways of opening firefox, including the direct use of firefox.exe and had also tried the suggestions in the link above, but had previously worked.

  Having lived every suggestion I could find about the problem I'm afraid, I gave up looking and did a system restore that solved the problem!

• Satellite A300 - constant "Webcam Driver Open Fail' error

  I have searched and looked for solutions to this problem and feel like I've tried everything. Whenever I turn on my laptop or try to start my webcam I get the error "Webcam driver open fail." Please restart camera or computer. »

  I used to be able to use the webcam with no problems, but it just stopped one day of work. I recently reformatted my drive to operate the State out-of-the-box, but it always shows an error whenever I try to use my webcam. I am running Windows Vista Home Premium on an A300 model: PSA - GCA. I also tried updating the driver for the webcam (and the last update of the BIOS) section of the support from Toshiba, but without success. I also tried to use the webcam XP driver, but still no luck.

  Any idea on how to solve this problem?

  Post edited by: Replicant

  I also forgot to mention that in my device manager, I don't see my Chicony Webcam at all. There is no section for current imaging devices at all.

  Hello

  If you're looking for here in the forum you will find a sufficient number of threads on this problem but I founded a thread interesting with good detachment of user Akuma and mayb s useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  If it doesn t work I think you need assistance from an authorized service provider. Technicians can check your laptop and fix it if necessary s.

  Good luck!

• Open Storage error 2258

  Im trying to write a VI to write data in a PDM file and this is my first time using the PDM commands. I have the commands "Open storage", "Write" and "Close Storage" all wired to the top, but my VI will never run because "Open storage compartment" express VI comes up with error 2258 saying impossible to open the file. File, it seeks to 'open' does not exsist, but I tried opens it to crush with create, open or create, and create or replace, and there again and still the same error. What causes this?

  Is the folder that you write to exist?  I haven't used the screw PDM, another writing file screws can create a file and not a folder.

• HP DL380 G4: Download driver HP DL380 G4 - could not open page error

  I want to download the driver for HP DL380 G4, for 32-bit Windows Server. Driverpage selecting OS site returns with the error:

  Could not open page
  The service or the information requested is not available at this time.
  Please try again later.

  (Error: system-websrv_unavail)

  Please try again, I just tried the website and page pilot is appeared:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=426678&swLangOid=8&swEnvOid=1005

• Cannot open websites, error DNS when the ping command cannot resolve the name

  Cannot open all websites on a PC. (other computers on the network can access the sites without a problem)
  Error message is "Internet Explorer cannot display webpage."

  I can ping (internal and external) of the IP and gateway addresses.
  Ping translates:
  C:\>ping www.yahoo.com
  Ping request could not find host www.yahoo.com. Please check the name and try again.

  Nslookup translates:
  C:\>nslookup www.yahoo.com
  Can not find the name of the server for the address 192.168.0.1: non-existent domain
  Default servers are not available
  Server: unknown
  Address: 192.168.0.1

  Non-authoritative answer:
  Name: www-real.wa1.b.yahoo.com
  Address: 69.147.76.15
  Alias: www.yahoo.com, www.wa1.b.yahoo.com

  Pathping translates:
  C:\>Pathping www.yahoo.com
  Unable to resolve target system name www.yahoo.com.

  The problem occurs on a wired and wireless connection.
  Reset TCP/IP via netsh int ip reset c:\ressetlog.txt results in the following in the log file error message:

  discount Linkage\UpperBind for USB\VID_0B05 & PID_1723\5 & 2461925A & 0 & 5.  incorrect value was:
  REG_MULTI_SZ =
  SymIM

  Is there a total of 9 errors in the log similar to the one above.
  The host file has only 127.0.0.1 in there.
  Clearing the cache of the arg, flushing the DNS and do a repair on the network connection does not resolve the problem.
  Install a new network device does not resolve the problem.
  I also deleted all the antivirus software and security, including firewalls.
  The Windows Firewall is disabled.
  Boot in safe mode with Networking does not solve the problem.
  Running Winsockfix does not solve the problem.
  Internet Explorer 8 (reset web settings has been done)
  Windows XP Media Center with SP3
  Execution of the IE Diagnostics results in an error 12007 the server name or address cannot be resolved.

  Get the end of the line...

  Any other ideas?

  Thank you

  Larry

  Sorry for the late reply, but I did not have access to the MS Web site for a few months.

  I tried your suggestions, they do not work.

  The resolution is to do a repair of the operating system out of the CD.  Who cleared up the problem.

  Thank you

  Larry

• Adobe Reader does not work, the patch could not be opened. Error code 103

  original title: adobe reader software

  I have a windows xp and ie 8 and when I go to print a statement of a biller, the error code is 103:103 and it says that your adobe reader software does not have the patch cannot be opened. check that there is and that you can access.

  I suggest to uninstall Adobe Reader and get a nice drive more Windows such as this. I dropped Adobe years ago. Nothing but headaches.

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/